Setting the Date and Time
FUNC.
( 20)
1Open the date and time setup screen.
FUNC. [ MENU]
[ DATE/TIME SETUP] [DATE/TIME]
Blinking arrows will be displayed around the first field of the date.
2Change each field of the date and time with the joystick () and move ( ) to the next field.
3Press ( ) to start the clock.
4Press FUNC. to close the menu.
NOTES
You can also change the date format ( 58).
Getting Ready to Start
Recording
Opening the Lens Cover and Adjusting the LCD Screen
Before you start recording, open the lens cover.
Move the lens cover switch down to to open the lens cover.
Rotating the LCD Panel
Open the LCD panel 90 degrees.
You can rotate the panel 90 degrees downward.
180°
90°
You can rotate the panel 180 degrees toward the lens (allowing the subject to monitor the LCD screen while you use the viewfinder). This is the only case where you can use the viewfinder and
23