Canon MD 205 instruction manual Connecting to a Computer, PC Connection Diagram

Connecting to a Computer

DV Terminal

• Check the type and orientation of the terminal and make sure you connect the DV cable properly.

• Use the optional CV-150F (4 pin-4 pin) or CV-250F (4 pin-6 pin) DV cable.

Open the LCD panel to access.

PC Connection Diagram

Terminal on the	Connecting Cable	Terminal on the
Camcorder		Connected Device

1

Output connection (signal flow ) to a computer with a DV (IEEE1394) terminal or a DV capture board.

4-pin

CV-150F/CV-250F

DV Cable (optional)

6-pin*

*Be careful to correctly insert the 6-pin plug into the DV terminal. Inserting it in the wrong direction can result in damage to the camcorder.

51