Menu Options Lists 27
VCR SETUP
REC MODE
[ 
STD PLAY], [ 
LONG PLAY] Recording in LP mode extends the
available recording time on the tape 1.5 times.
Depending on the condition of the tape (long usage, imperfections, etc.) you may notice some video problems (blocky video artifacts, banding, etc.) in the playback picture when playing back recordings made in LP mode. We recommend using the SP mode for important recordings.
If you make recordings in both SP and LP modes on the same tape, during playback you may notice some video problems in the picture at the point where the recording mode changes.
When playing back in this camcorder tapes recorded in LP mode with other devices or vice versa, you may notice some problems in the playback picture or the sound may stop briefly.
TV TYPE
[ 
NORMAL TV], [ 
WIDE TV]
In order to display the picture in full and in the correct aspect ratio, select the setting according to the type of television to which you will connect the camcorder. [NORMAL TV]: TV sets with 4:3 aspect ratio.
[WIDE TV]: TV sets with 16:9 aspect ratio.
AUDIO SETUP
OUTPUT CH | ( 36) |
[
L/R], [
L/L], [
R/R]
WIND SCREEN
Mode switch: 
[ 
AUTO], [ 
OFF
]
The camcorder automatically reduces the background sound of wind when recording outdoors.
The wind screen cannot be turned off
when the mode switch is set to 
.
| 12bit AUDIO | ( | 36) |
[ | STEREO1], [ | STEREO2], |
|
[ | MIX/FIXED], [ | MIX/VAR.] |
|
| MIX BALANCE | ( | 36) |
When [12bit AUDIO] is set to [ 
MIX/ VAR.], adjust (
) the sound balance with the joystick.
The camcorder will retain the audio balance adjustment, however if you turn off the camcorder, [12bit AUDIO] will be
reset to [ 
STEREO1].
AUDIO MODE
16bit], 