Canon 300D Installing a CF Card Open the cover, 2Insert the CF card, Close the cover

Page 25

Installing and Removing the CF Card

The captured image will be recorded onto the CF card (optional). Either a Type I or Type II CF card can be inserted into the camera.

Installing a CF Card

1 Open the cover.

• Slide the cover in the direction shown by the arrow, and open it.

mark Label side

Eject button

2Insert the CF card.

•Using CF cards made by Canon is recommended.

•With the CF card label side (the side with the printed mark) facing toward the rear of the camera, slide the card in the direction of the mark, into the

slot.

sThe Eject button pops out.

3 Close the cover.

• Close the cover and slide it in the direction shown by the arrow until it clicks shut.

sWhen you set the Power switch to

<1>, the number of remaining shots will be displayed on the LCD panel and in the viewfinder.

Number of remaining shots

The number of remaining shots depends on the remaining capacity of the CF card and the ISO speed setting.

Image 25

Contents Page Page Copyrights Test the Camera Before ShootingEquipment Check List Contents 109 Safety Warnings Preventing Injury or Equipment Damage LCD Panel and LCD Monitor CameraCF Card Lithium Battery for the Date and TimeLens Electrical Contacts Reference page numbers are indicated by p.∗∗ NomenclatureEF-S18-55mm f/3.5-5.6 lens LCD AEB LCD PanelViewfinder Information Basic Zone Mode DialImage Zone Creative ZoneBattery pack slot Red lamp Battery Charger CB-5LPower cord socket DC coupler plug DC coupler cord AC Adaptor Kit ACK-E2 optionalConventions Used in this Manual Attaching the Strap Before You StartAttach the battery Connect the power cord4Recharge the battery 2Remove the coverPage Installing and Removing the Battery 2Remove the battery pack Removing the Battery Open the battery compartment cover Battery Life Shooting conditions2Connect the power cord Using a Household Power SupplyConnect the DC Coupler Connect the DC Coupler’s plug to the AC adapter’s socketMounting and Detaching a Lens On the lens, set the focus mode switch to AFMounting a Lens Remove the caps 2Attach the lensUsing CF cards made by Canon is recommended Installing a CF Card Open the cover2Insert the CF card Close the cover2Remove the CF card Removing the CF Card Open the coverShutter Button Power SwitchHalfway pressing Full pressingOperating the l Dial Press a button and turn the l dial Using the Electronic DialsJust turn the l dial Menu Operations 4Select the menu setting Setting Procedure Display the menu5Set the desired setting 2Select a tab˙ Shooting Menu SettingsPlayback ∆ Set-upShooting Settings 2Clear the settingsImage Recording Settings LCD MonitorSelect Date/Time Setting the Date and Time2Set the date and time 3Set the date display format+ Be sure the battery’s orientation + is correct Replacing the Date/Time Battery5Close the cover Select OK Cleaning the Image Sensor CmosTerminate the cleaning 4Clean the image sensorTurn the dioptric adjustment knob Dioptric AdjustmentIllustration shows the knob at the standard setting -1 dpt Holding the CameraFully Automatic Shooting Set the Mode Dial to Y U I O P Or SFully Automatic Shooting 4Check the exposure setting2Aim any of the AF points on the subject Focus the subjectShoot Portrait Programmed Image Control ModesLandscape Close-upSports You can disable the flash when you do not want it to fireNight Portrait Flash offImage Review 2Set the Review settingSelect Review Captured image will be displayed on the LCD monitorChanging the Review Time 2Set the Review time settingSelect Review time Press the H´ button Self-timer Operation2Focus the subject Press the H´ button so that ´ appears on the LCD panelPress the H ´ button Wireless Remote Control2Shoot Remove the eyecup Using the Eyepiece Cover2Attach the eyepiece cover From the bottom of the eyecup, push it UpwardSettings for Shooting Image-Recording Quality Image-recording Quality SettingsSelect Quality 2Select the image-recording qualityImage Size Pixels Format ISO Speed in the Basic Zone Modes Setting the ISO SpeedISO Speed in the Creative Zone Modes 1Press the D ß buttonSelecting the White Balance Press the 6 ∂ button 2Select the white balance settingWhite Balance Shoot a white object Custom White Balance2Select Custom WB Select an image4Select White Balance Auto Bracketing3Set the bracketing amount Press the µ keys to select4Shoot Canceling White Balance Auto BracketingSelect Parameters Selecting the Processing Parameter2Select the processing parameter Processing ParametersSelect the Set No 2Select Set upPress the å keys to select 1, 2, or 3, then press p Set the parameter 4Select the parameter6Return to the Parameters menu Select the desired Set NumberFile Numbering Auto ResetSelect File numbering 2Select the file numbering method2Set the Auto rotate setting Setting Auto RotationSelect Auto rotate Take a vertical shotDisplay the camera settings INFO. Checking Camera SettingsCamera Setting Information Advanced Operations Automatic AF point Selection 3Selecting an AF PointManual AF point Selection Press the 3 buttonSet a Creative Zone mode except Q Set the camera to a Creative Zone modeFocus Lock Manual Focusing When Autofocus Fails Manual FocusingFocusing ring Drive Mode Selection TProgram AE Set the Mode Dial to T2Focus on the subject Check the displayProgram AE Shifting the ProgramPage Shutter Speed Display 2Select the desired aperture value Aperture-Priority AE4Checkshoot. the viewfinder display With a large aperture valueAperture Value Display Depth-of-field Preview3Select the desired aperture value 4Focus on the subject Set the Mode Dial to f 2Select the desired shutter speedTurn the l dial to set the desired shutter speed 6Shoot 5Determine the exposureAutomatic Depth-of-Field AE Set the Mode Dial to Q 2Focus the subjectSet the exposure compensation amount Setting Exposure CompensationPress the shutter button halfway and check the display Select AEB Auto Exposure Bracketing2Set the AEB amount 3ShootCanceling AEB JAE Lock Exposure setting will be displayed in the viewfinder2Press the j button. ˜ Compose the shot and shootDial to select Next setting after Set the Mode Dial to W 2Set the shutter speed toBulb Exposures Set the aperture valueUsing the Built-in Flash in the Basic Zone Using the Built-in FlashUsing the Built-in Flash in the Creative Zone Built-in Flash Range Flash Sync Speed and Aperture SettingsSelect Red-eye on/off Using Red-eye Reduction2Set the red-eye reduction Check that the M icon is lit FE LockMetering Modes Centerweighted average metering0LCD Panel Illumination Evaluative meteringImages not taken with the camera Image PlaybackSingle image Playback the image Image Playback2View another image Image with Shooting InformationHighlight Alert HistogramSample Histogram Setmode.the camera to the playback Index Display2Display the index Nine thumbnail images are displayed on one screenDisplay the image to be magnified Magnified View2Magnify the image Scroll aroundImage Jump Jumping in the index display modeSet the camera for playback 2Set jump displaySelect Auto Play Automated Playback of Images Auto playback2Start the auto play Stop the auto playSelect Rotate Rotating an Image2Rotate the image Switch to Video Connecting to a TV2Turn the TV on, and set the input 4Press the buttonSelect Protect Image Protection2Set the image protection 2Display the erase menu Erasing an ImageErase the image Select All Erasing All Images4Erase the images Formatting the CF Card Format the CF card before using it in the cameraSelect Format 2Format the CF cardAbout Error Message Direct Printing from the Camera Connect the Camera to the Printer Turn the Power switch to 2Set up the printer3Connect the camera to the printer 4Turn on the printer5Turn the camera’s power switch to 1, then press the button Select the image to be printed Printing2Press p 4Print the image 3Select StyleStyle setting screen Setting the Printing Style Select Style2Select the style option 3Select the desired setting Setting the Trimming Setting the Quantity Set the number of copiesSelect Trimming 2Trim the image3Exit the trimming Press p to return to the print setting screenRotating the trimming frame Resolving Printing Errors When Stopping the PrintingCamera uses Dpof Version Dpof Digital Print Order FormatPrinting Options Print OrderSelect Print Order Set the print type, date, and file No. options4Select the desired setting Select the set up optionExit the set up screen Print Type112 Select Order Selecting Individual Images2Select the image to be printed 4Exit the Order screen Set the print settingsPress the å keys to set the number of copies from 1 to Selecting All Images If you select Cancel, the print order screen will reappear2Select Mark all Exit the Print Order screen2Select Print Order Direct Printing with DpofSelect Print Check the printing options displayed 5Start printingOn the upper left Press the å keys to select OKStopping the Printing Resolving Printing ErrorsResuming the Printing Memo 120 Reference 122 Function Availability TableONE Shot AF AF Modes and Drive ModesBattery cannot be recharged Power SourceBattery becomes exhausted quickly Camera turns off by itselfShooting Date and time is wrong Image cannot be erasedNo image appears on the TV screen Error code Countermeasures Error CodesMajor Accessories optional Remote Switch RS-60E3 Remote Controller RC-5Shoe-mount Speedlites Macro FlashEP-EX15 System Map131 Type SpecificationsImage Sensor Recording SystemAutofocus ViewfinderExposure Control Built-in Flash ShutterExternal Speedlite Drive SystemPlayback Power SourceImage Protection and Erase Direct Printing from the CameraOperating Environment Dimensions and WeightEF-S18-55mm f/3.5-5.6 Digital Camera Model DS6041 Systems 127 Index139 Canon U.S.A. INC CT1-1244-000

Related manuals

Manual 5 pages 17.21 Kb