Canon 300D Connecting to a TV, 2Turn the TV on, and set the input, Switch to Video

Page 94

Connect the camera to the TV.

Connecting to a TV

By connecting the camera to a TV set with the video cable (provided), you can view the recorded images on a TV set. Always turn off the camera and the television before connecting or disconnecting them. Be sure the camera is set to the video system format (NTSC or PAL) compatible with the TV set. If necessary, set the menu’s [Video system] setting to [NTSC] or [PAL]. If the proper video system format is not set, the image will not be displayed properly.

1 • Open the camera’s terminal cover. • Use the video cable (provided) to

connect the camera’s < ∑> terminal to the TV monitor’s VIDEO IN terminal.

•Insert the cable plug all the way in.

	2Turn the TV on, and set the input
	switch to Video In.
Video input terminal	3 Turn the camera’s power switch to
	3 Turn the camera’s power switch to
	<1>.
	4Press the <]> button.

s The image will appear on the TV set. (The camera’s LCD monitor will not display anything.)

• When you finish, set the Power switch to <2>, turn the TV off, then disconnect the video cable.

• While looking at the TV monitor, you can view images and set the menu settings as you can with the LCD monitor.

•Depending on the TV monitor, the image periphery may not appear.

93

Image 94

Contents Page Page Test the Camera Before Shooting CopyrightsEquipment Check List Contents 109 Safety Warnings Preventing Injury or Equipment Damage Camera LCD Panel and LCD MonitorCF Card Lithium Battery for the Date and TimeLens Electrical Contacts Reference page numbers are indicated by p.∗∗ NomenclatureEF-S18-55mm f/3.5-5.6 lens LCD LCD Panel AEBViewfinder Information Image Zone Mode DialBasic Zone Creative ZonePower cord socket DC coupler plug DC coupler cord Battery Charger CB-5LBattery pack slot Red lamp AC Adaptor Kit ACK-E2 optionalConventions Used in this Manual Before You Start Attaching the Strap4Recharge the battery Connect the power cordAttach the battery 2Remove the coverPage Installing and Removing the Battery Battery Life Removing the Battery Open the battery compartment cover2Remove the battery pack Shooting conditionsConnect the DC Coupler Using a Household Power Supply2Connect the power cord Connect the DC Coupler’s plug to the AC adapter’s socketMounting a Lens Remove the caps On the lens, set the focus mode switch to AFMounting and Detaching a Lens 2Attach the lens2Insert the CF card Installing a CF Card Open the coverUsing CF cards made by Canon is recommended Close the coverRemoving the CF Card Open the cover 2Remove the CF cardHalfway pressing Power SwitchShutter Button Full pressingOperating the l Dial Press a button and turn the l dial Using the Electronic DialsJust turn the l dial Menu Operations 5Set the desired setting Setting Procedure Display the menu4Select the menu setting 2Select a tabPlayback Menu Settings˙ Shooting ∆ Set-upImage Recording Settings 2Clear the settingsShooting Settings LCD Monitor2Set the date and time Setting the Date and TimeSelect Date/Time 3Set the date display format+ Be sure the battery’s orientation + is correct Replacing the Date/Time Battery5Close the cover Cleaning the Image Sensor Cmos Select OK4Clean the image sensor Terminate the cleaningIllustration shows the knob at the standard setting -1 dpt Dioptric AdjustmentTurn the dioptric adjustment knob Holding the CameraSet the Mode Dial to Y U I O P Or S Fully Automatic Shooting2Aim any of the AF points on the subject 4Check the exposure settingFully Automatic Shooting Focus the subjectShoot Landscape Programmed Image Control ModesPortrait Close-upNight Portrait You can disable the flash when you do not want it to fireSports Flash offSelect Review 2Set the Review settingImage Review Captured image will be displayed on the LCD monitorChanging the Review Time 2Set the Review time settingSelect Review time 2Focus the subject Self-timer OperationPress the H´ button Press the H´ button so that ´ appears on the LCD panelPress the H ´ button Wireless Remote Control2Shoot 2Attach the eyepiece cover Using the Eyepiece CoverRemove the eyecup From the bottom of the eyecup, push it UpwardSettings for Shooting Select Quality Image-recording Quality SettingsImage-Recording Quality 2Select the image-recording qualityImage Size Pixels Format ISO Speed in the Creative Zone Modes Setting the ISO SpeedISO Speed in the Basic Zone Modes 1Press the D ß buttonSelecting the White Balance Press the 6 ∂ button 2Select the white balance settingWhite Balance 2Select Custom WB Custom White BalanceShoot a white object Select an image3Set the bracketing amount White Balance Auto Bracketing4Select Press the µ keys to selectCanceling White Balance Auto Bracketing 4Shoot2Select the processing parameter Selecting the Processing ParameterSelect Parameters Processing ParametersSelect the Set No 2Select Set upPress the å keys to select 1, 2, or 3, then press p 6Return to the Parameters menu 4Select the parameterSet the parameter Select the desired Set NumberSelect File numbering Auto ResetFile Numbering 2Select the file numbering methodSelect Auto rotate Setting Auto Rotation2Set the Auto rotate setting Take a vertical shotDisplay the camera settings INFO. Checking Camera SettingsCamera Setting Information Advanced Operations Manual AF point Selection 3Selecting an AF PointAutomatic AF point Selection Press the 3 buttonSet a Creative Zone mode except Q Set the camera to a Creative Zone modeFocus Lock Manual Focusing When Autofocus Fails Manual FocusingFocusing ring Drive Mode Selection 2Focus on the subject Set the Mode Dial to TTProgram AE Check the displayShifting the Program Program AEPage Shutter Speed Display 4Checkshoot. the viewfinder display Aperture-Priority AE2Select the desired aperture value With a large aperture valueDepth-of-field Preview Aperture Value Display3Select the desired aperture value 4Focus on the subject Set the Mode Dial to f 2Select the desired shutter speedTurn the l dial to set the desired shutter speed 5Determine the exposure 6ShootSet the Mode Dial to Q 2Focus the subject Automatic Depth-of-Field AESet the exposure compensation amount Setting Exposure CompensationPress the shutter button halfway and check the display 2Set the AEB amount Auto Exposure BracketingSelect AEB 3ShootCanceling AEB 2Press the j button. ˜ Exposure setting will be displayed in the viewfinderJAE Lock Compose the shot and shootBulb Exposures Set the Mode Dial to W 2Set the shutter speed toDial to select Next setting after Set the aperture valueUsing the Built-in Flash in the Basic Zone Using the Built-in FlashUsing the Built-in Flash in the Creative Zone Flash Sync Speed and Aperture Settings Built-in Flash RangeSelect Red-eye on/off Using Red-eye Reduction2Set the red-eye reduction FE Lock Check that the M icon is lit0LCD Panel Illumination Centerweighted average meteringMetering Modes Evaluative meteringImage Playback Images not taken with the camera2View another image Image PlaybackSingle image Playback the image Image with Shooting InformationHighlight Alert HistogramSample Histogram 2Display the index Index DisplaySetmode.the camera to the playback Nine thumbnail images are displayed on one screen2Magnify the image Magnified ViewDisplay the image to be magnified Scroll around Set the camera for playback Jumping in the index display mode Image Jump 2Set jump display2Start the auto play Automated Playback of Images Auto playbackSelect Auto Play Stop the auto playSelect Rotate Rotating an Image2Rotate the image 2Turn the TV on, and set the input Connecting to a TVSwitch to Video 4Press the buttonSelect Protect Image Protection2Set the image protection 2Display the erase menu Erasing an ImageErase the image Select All Erasing All Images4Erase the images Select Format Format the CF card before using it in the cameraFormatting the CF Card 2Format the CF cardAbout Error Message Direct Printing from the Camera 3Connect the camera to the printer Turn the Power switch to 2Set up the printerConnect the Camera to the Printer 4Turn on the printer5Turn the camera’s power switch to 1, then press the button Select the image to be printed Printing2Press p 3Select Style 4Print the imageStyle setting screen Setting the Printing Style Select Style2Select the style option 3Select the desired setting Select Trimming Setting the Quantity Set the number of copiesSetting the Trimming 2Trim the image3Exit the trimming Press p to return to the print setting screenRotating the trimming frame When Stopping the Printing Resolving Printing ErrorsDpof Digital Print Order Format Camera uses Dpof VersionSelect Print Order Print OrderPrinting Options Set the print type, date, and file No. optionsExit the set up screen Select the set up option4Select the desired setting Print Type112 Select Order Selecting Individual Images2Select the image to be printed 4Exit the Order screen Set the print settingsPress the å keys to set the number of copies from 1 to 2Select Mark all If you select Cancel, the print order screen will reappearSelecting All Images Exit the Print Order screen2Select Print Order Direct Printing with DpofSelect Print On the upper left 5Start printingCheck the printing options displayed Press the å keys to select OKStopping the Printing Resolving Printing ErrorsResuming the Printing Memo 120 Reference Function Availability Table 122AF Modes and Drive Modes ONE Shot AFBattery becomes exhausted quickly Power SourceBattery cannot be recharged Camera turns off by itselfShooting Date and time is wrong Image cannot be erasedNo image appears on the TV screen Error Codes Error code CountermeasuresMajor Accessories optional Shoe-mount Speedlites Remote Controller RC-5Remote Switch RS-60E3 Macro FlashSystem Map EP-EX15131 Image Sensor SpecificationsType Recording SystemAutofocus ViewfinderExposure Control External Speedlite ShutterBuilt-in Flash Drive SystemImage Protection and Erase Power SourcePlayback Direct Printing from the CameraOperating Environment Dimensions and WeightEF-S18-55mm f/3.5-5.6 Digital Camera Model DS6041 Systems Index 127139 CT1-1244-000 Canon U.S.A. INC

Related manuals

Manual 5 pages 17.21 Kb