Canon F1N Camera manual Aperture

Page 23

12 APERTURE

Blurring part of the picture can heighten the sense of action. In most cases, how- ever, image blur is undesirable. To avoid blurred pictures from camera movement, choose a shutter speed of at least 1/60 sec. for handheld shooting with a standard lens.

With a telephoto lens, it is advisable to use faster shutter speeds. The rule of thumb is to use a shutter speed no slower than the reciprocal of the lens in use. This means that for a 100mm lens, the shutter speed should be at least 1/125 sec.; for a 500mm lens, it should be at least 1/500 sec.

12 Aperture

The size of the aperture determines the amount of light allowed to reach the film. The apertures are indicated by a series of numbers, called f/stops or f-numbers, iV‘hich can be found on the aperture ring. The smaller numbers are called large f/stops while the larger numbers are called small f/stops. This is because the smaller numbers represent larger apertures which allow more light to pass through the lens. The largest f/stop on the lens is called the lens maximum aperture; the smallest f/stop the lens minimum aperture. The maximum and minimum apertures differ depending on the lens.

Each time you turn the aperture ring from one f/stop to the next smaller one, the amount of light allowed through is exactly halved. Using f/2 as a standard, the amount of light striking the film will change according to the f/stop indicated below.

How the Aperture Affects the Picture

In addition to controlling the quantity of light, the aperture influences depth of field which, in turn, affects the way a picture will look. When your subject is in focus, there is a certain area in front of and behind it which will also be in focus. This range of sharpness is called depth of field.

f/stop

(1.2)

1.4

(1.8)

2

2.8

4

5.6

8

11

Brightness ratio

3

2

1-1/4

1

1/2

1/4

1/8

1/16

1/32

 

 

 

 

 

 

 

 

 

 

f/stop

16

22

32

 

 

 

 

 

 

Brightness ratio

1/64

1/128

1/256

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

23

Image 23
Contents Lars Heineken 23rd December Canon New F1 Instructions ManualContents Contents Attaching the Lens FLP Loading the Battery BatteryChecking the Battery Battery Shutter Release and Self-timer/Lock Lever Shutter Release and SELF-TIMER/LOCK Lever Holding the Camera Focusing Focusing Loading the Film Setting the ASA/ISO Film Speed Frame Counter Frame Counter Exposure Shutter Shutter Freezing Motion How to Choose a Shutter SpeedPanning Blurring the Subject’s MotionAperture ApertureAperture Full-aperture Metering Exposure ModesStopped-down Metering Normal Meter Mode SelectorWhich viewfinder did you purchase? Match-needle Metering Eye-Level Finder FNMatch-needle Metering EYE-LEVEL Finder FN Stopped-down Fixed-index Metering Aperture-priority AE AE Finder FNAPERTURE-PRIORITY AE Stopped-down AE Incorrect exposure Page Shutter-priority AE SHUTTER-PRIORITY AE SHUTTER-PRIORITY AE Meter Coupling Range Metering Sensitivity Areas Metering Sensitivity Areas Metering Sensitivity Areas Exposure Compensation Exposure Compensation Exposure Compensation Exposure Compensation Exposure Compensation Rewinding the Film Rewinding the Film Depth of Field Depth of Field Self-timer SELF-TIMER SELF-TIMER Multiple Exposures Multiple Exposures Multiple Exposures Exposure in Multiple Exposures Flash Photography Slow-sync Flash Photography General Flash Photography Flash Photography Shooting with Close-up Accessories Shooting with CLOSE-UP Accessories Shooting with CLOSE-UP Accessories Shooting with CLOSE-UP Accessories Shooting with CLOSE-UP Accessories Shooting with CLOSE-UP Accessories Canon AE Motor Drive FN System AccessoriesCanon AE Power Winder FN Canon Film Chamber FN-100 Canon Data Back FN Canon Wireless Controller LC-1 Specification Specification Specification Specification Specification With FD 50mm f/1.4 Caring for your Camera Caring for Your Camera