20
Playback
1. Set the mode switch to 
(playback) (a).
The last image that was played back appears. If additional images were shot after viewing images in playback mode, the last image that was shot will appear instead. If the memory card has been switched, or the images on the memory card have been edited with a computer, the newest image on the memory card appears.
2. Use the
or 
button to display the image you wish to view (b).
Use the 
button to move to the previous image and the 
button to move the next image.
Holding the button down advances the images more rapidly, but shows them less clearly.
See the Advanced Guide for the various playback methods available.
Erasing
1. In the playback mode, use the 
or 
button to select an image to erase (a) and press the 
button (b).
2. Confirm that [Erase] is selected and press the FUNC./SET button (c).
To exit instead of erasing, select [Cancel].
Please note that erased images cannot be recovered. Exercise adequate caution before erasing an image.
See the Advanced Guide: Erasing All Images (p. 90).