2. Connecting the camera to a computer.
1.Use the supplied interface cable to connect the computer’s USB port to the camera’s DIGITAL terminal. Slip your fingernail under the left end of the camera’s terminal cover, lift it open and plug the interface cable in all the way.
USB Port
Interface Cable
2.Set the camera mode switch to (playback) and turn on the power. The camera and computer will be able to communicate.
DIGITAL Terminal
Interface Cable
Always grasp the sides of the connector when disconnecting the interface cable from the camera’s DIGITAL terminal.
If the Digital Signature Not Found window appears, click [Yes]. The USB driver will automatically finish installing onto the computer when you attach the camera and open a connection.
28