Handling Precautions, Table of contents | Canon X-Loupe specification

Handling Precautions

Please Read the following Safety Precaution before Using X-Loupe!

WARNING! To avoid the fire, electric shock, or severe injury, please obey the following instructions.

1.Keep X-Loupe and its accessories away from children and infants. Contact a doctor if any dangerous situation occurs.

2.Do not point X-Loupe directly at the sun or blazed light sources.

3.Keep X-Loupe away from water or other liquids. The usage of damped or drowned X-Loupe could re- sult in fire or electric shock. Immediately turn off the power of X-Loupe and remove the battery, or un- plug the battery charger or any electric adapter from the outlet.

4.Keep X-Loupe away from the heat source, and avoid its exposure to the direct flame or heat.

5.Do NOT disassemble, alter, or apply heat to the battery. Avoid any severe impacts which could dam- age the protective casing of the battery.

6.In case of any contact to the leaked substances from the battery, immediately flush the contacted sk- in, face, or cloth with large amount of water and ask for the medical assistance.

7.To avoid the fire, explosion, or injury, please keep battery terminals away from metal or magnetic materials.

8.Before you discard a battery, please use the insulation tape to cover battery terminals to avoid direct contact with other objects. Contac with metal or magnetic materials in waste container may result in fire or explosions.

CAUTION! If potential hazards are not eliminated, it may result in body injury, property/financial loss, and the malfunction of the product. The following instructions are also applied to the warning of unsafe operation.

1.Avoid strong impacts or shocks of the equipment. Do NOT strongly push the objective lens. 2.Do NOT use, place or store the equipment in a place with strong sunlight or high temperatures. 3.Avoid using the equipment under the airtight or airless condition; otherwise, it may result in short

circuit, overheating, explosion, fire, burns, or other accidents. High temperature could deform the shape of casing.

4.If not using the equipment for a long period of time, please remove the battery from the equipment and the battery charger and store them in a safe place. Improper usage of the battery could make the battery exhausted in a short time.

5.The battery of X-Loupe is specifically designed to be charged by Canon battery charger. Please do not charge the battery with other branded chargers; otherwise, product breakdown, overheating , fire, electric shock, or body injuries might occur.

6.Before you move the equipment rapidly from a cold place to a hot place, please place the equipm- ent inside a sealed plastic bag to allow its gradual adaptation with the ambient temperature, as well as to avoid the water condensation which might cause mechanical problems. Moving the equipment rapidly from a cold place to a hot place may cause condensation (water droplet) to form in the inside or on the surface of the equipment.

‧About Lumos X-LOUPE G Series	28
‧Components	30
‧Attention/ Warning for the Battery Charging	33
‧Light Source	34
‧Assembling	38
‧Shooting Strategy	40
‧Notice and Preparation before Using the X-LOUPE	42
‧Basic Skills for Micro-Photography	43
‧Canon Digital Camera Basic Setup – Micro - Photography	47
‧Digital Magnification of X-LOUPE	51
‧Basic Trouble Shooting	52

Please Keep the User Guide for the Future Reference.

★While every effort has been made to ensure that the information contained in this guide is accurate and complete, no liability can be accepted for any errors or omissions.

★Lumos Technology reserves the right to change the specifications of hardware and software described herein without prior notice.

★X-Loupe is protected by the following patents: Taiwan Patent No. M292708、M313792、 M315340、M315354；Germany Patent No. Nr.202006001999.5; Japan Patent No.31204 70; United States, China Patent Pending.

page26

page27