Features, Suggested Hookup | MMATS Professional Audio D700.2

FEATURES

Ultra- Efficient Class D Audio Output Stage

Proven Contest Winning Power

Dual Regulated Pulse-Width-Modulated Power Supply

High Capacity Heat Sink

Adjustable 24db Low Pass Filter

1% Surface Mount Components

Computer Optimized Transformer

Large Geometry Power MOSFETs

Overload and Thermal Protection

SUGGESTED HOOKUP

This Amplifier is optimized to run into 2 ohm loads

This can be configured many ways:

3 six ohm woofers @ 233Wrms each

2 four ohm woofers @ 350Wrms each

1 two ohm woofer @ 700Wrms each

CONTROLS AND CONNECTORS

Positive Power Terminal - This is the power feed from the positive

(+)terminal of the car’s battery. Use 4 gauge cable and good quality terminals when routing this connection. Tighten the connections well to prevent power loss due bad contact. Route the power cable away from the RCA and speaker cables

Ground Terminal - For optimum performance, an 4 gauge cable and good quality connectors should attach the this terminal to the battery’s negative (-) terminal.

Remote Terminal - The amplifier will turn on when 12 volts is applied to this terminal. This 12 volt signal is usually taken from the Power Antenna or Remote wire coming from the source unit.

Speaker Terminals – Two pairs of (+) and (-) terminals are provided for ease of connecting multiple woofers. It does not matter which (+) or (-) you use as they are connected together internally. Running too low of a speaker impedance will cause the amplifier to go into a fault condition.

Lowpass Filter – Linkwitz/Riley 24db slope. This control sets the 6db down point of your amplifier. Higher frequencies beyond this setting are not heard from your speakers.

Gain – Allows input levels between 150mV and 2.5 volts for full output.

Inputs – Two RCA jacks are provided. Their signals are added together inside the amplifier and the bass information is extracted. Since they are summed together, it does not matter which one is ‘Left’ or ‘Right’.

D700.2 specifications

The MMATS Professional Audio D700.2 is a high-performance amplifier tailored for audio enthusiasts who demand the best in sound fidelity and power delivery. Renowned for its innovative design and robust build, the D700.2 is a perfect choice for both competitive car audio systems and high-end home setups.

One of the standout features of the D700.2 is its impressive power output. With a continuous power rating of 700 watts at 2 ohms, it is engineered to drive subwoofers with authority and precision. This ensures that users can experience deep, thunderous bass without distortion at high volumes. The amplifier utilizes a powerful MOSFET output stage, which enhances its efficiency and reliability, allowing it to handle varying loads with ease.

The D700.2 employs a sophisticated circuit design that includes a fully regulated power supply. This technology ensures consistent performance regardless of the vehicle's electrical system voltages. As a result, users can expect stable operation even under extreme conditions, which is especially beneficial for competition scenarios where performance is paramount.

Another key characteristic of the D700.2 is its comprehensive thermal management system. Featuring integrated heat sinks and intelligent thermal protection, the amplifier is designed to dissipate heat efficiently, minimizing the risk of overheating during prolonged use. This attention to thermal performance extends the lifespan of the amplifier while maintaining optimal performance levels.

When it comes to sound quality, the D700.2 excels with its low distortion levels and wide frequency response range. This amplifier is capable of reproducing the most nuanced details of music, allowing for a rich listening experience that satisfies even the most discerning audiophiles. With a signal-to-noise ratio of over 100 dB, background noise is virtually eliminated, making every note crystal clear.

In addition to its powerful performance, the D700.2 includes a variety of adjustable features, such as a built-in crossover, bass boost, and gain control, allowing users to tailor their sound to fit their specific preferences. This level of customization ensures that whether you're listening to hip-hop, rock, or classical music, the D700.2 can be optimized to suit your audio needs.

Overall, the MMATS Professional Audio D700.2 amplifier stands as a testament to quality engineering and exceptional audio performance. Its powerful output, advanced technologies, and user-friendly features make it an outstanding choice for anyone looking to enhance their audio experience, whether in a car or at home. With the D700.2, users can enjoy unparalleled sound quality and performance, truly elevating their listening experience to new heights.