Child Seat Functions
Storing the LATCH Connectors
When the LATCH connectors are not in use, lift |
|
the child seat cover to access LATCH storage |
|
slots (Fig. A). Fold each end of the LATCH |
|
strap and slide each LATCH connector into the | A |
adjacent slots. |
NOTE: Child seats are shipped from Britax with
LATCH connectors in the storage slots.
Recline Adjustment
Pull the recline handle then slide the child seat shell into the desired position. (Fig. B) Release the recline handle and verify the child seat has B locked into position.
NOTE: It will be necessary to loosen the tether, vehicle seat belt, and/or LATCH strap before adjusting the recline position. The tether, vehicle seat belt, and/or LATCH strap must be properly re- tightened after adjusting the recline position.
Chest Clip | C | |
Fastening the Chest Clip | ||
| ||
Fasten the chest clip by pushing the two halves |
| |
together until a positive click is heard (Fig. C). |
| |
Releasing the Chest Clip |
| |
Squeeze the middle tab together and pull apart |
| |
the two pieces (Fig. D). | D | |
Adjusting the Chest Clip | ||
|
Slide chest clip up or down on harness so it is positioned at the middle of the child’s chest, level with the child’s armpits.
Child Seat Functions
Harness Buckle |
|
|
|
|
|
Fastening the Harness Buckle |
|
|
|
|
|
Hold the harness buckle with one hand. Use |
|
|
|
|
|
the other hand to insert one buckle tongue at a |
|
|
|
|
|
|
|
|
|
| |
time into the harness buckle (Fig. E). | E |
|
|
|
|
|
|
|
| ||
|
| x 2 | |||
Proper connection is confirmed with a positive |
|
| |||
|
|
|
| ||
click after inserting each buckle tongue. |
|
|
|
|
|
Releasing the Harness Buckle |
|
|
|
|
|
Brace the rear of the harness buckle with one |
|
|
|
|
|
hand. Press the release button and slide both |
|
|
|
|
|
|
|
|
|
| |
tongues to remove from the buckle (Fig. F). | F |
|
|
|
|
IMPORTANT: Periodically clean the harness buckle |
|
|
|
| |
to ensure safe operation. See page 37. |
|
|
|
|
|
30 | 31 |