Installation: Forward-Facing

Lap-Shoulder Belt Installation

• Figure A illustrates a typical forward-facing lap- shoulder belt installation.

• When not in use, always store LATCH connectors in storage slots. See page 30.

WARNING! This child seat must not AForward-Facingbe used forward-facing for children

less than one year of age OR weighing less than 20 pounds.

IMPORTANT: Britax recommends that the Versa- Tether® be used at all times. Using the tether will improve the stability of the child seat and reduce the B risk of injury. Check your vehicle owner’s manual for approved tether anchor locations.

1￿ Place the child seat forward-facing on the vehicle seat.

•Child seat may be in upright or recline position. See Recline Adjustment on page 30.

2￿ If the vehicle is equipped with an approved C tether anchor for the chosen seating position,

remove the Versa-Tether®from the pouch and place it up and over the child seat back.

3￿ Pull the vehicle belt out and thread it through the forward- facing belt path (Fig. B).

4￿ Verify that the vehicle belt is not twisted and buckle (Fig. C).

5￿ Rotate lever downward to open the forward-facing lock-off farthest from where the vehicle belt is buckled.

6￿ Remove slack from the lap portion of the vehicle belt.

Installation: Forward-Facing

7￿ Push the child seat firmly into the vehicle seat while pulling the shoulder portion of the vehicle belt tightly through the lock-off (Fig. D).

8￿ Hold the shoulder belt tight and rotate the

lock-off upward until secured (Fig. E).

D

• If your vehicle is equipped with an automatic locking

retractor (ALR), use of the lock-offs is not required

 

as long as the ALR is locked. Check your vehicle

 

owner’s manual to determine what type of retractor

 

your vehicle has, and how to lock the retractor.

 

9￿ If the vehicle is equipped with an approved

 

tether anchor, attach the Versa-Tether®hook

E

to an approved tether anchor. Remove all

slack from the tether to secure. Store excess

 

webbing in the tether pouch. See pages 25 – 28.

10￿Verify that the vehicle belt is tight and that the child seat is secure.

•The child seat is secure when it cannot be moved front-to-back or side-to- side more than 1 inch (2.5 cm.) at the belt path.

Removal

•If connected, disconnect the Versa-Tether®from the tether anchor.

•Press the red release button on the vehicle belt buckle and pull the vehicle buckle from the child seat belt path.

20

21

Page 11 Page 13
Page 12
Image 12
Britax Roundabout manual Lock-off upward until secured Fig. E
Page 11 Page 13

Roundabout specifications

The Britax Roundabout is a well-regarded convertible car seat that exemplifies safety, comfort, and convenience for parents and children alike. Designed to accommodate children from approximately 5 to 65 pounds, it provides a versatile seating solution suitable for infants and toddlers as they grow.

One of the standout features of the Britax Roundabout is its dual mode functionality, allowing it to function as both a rear-facing and forward-facing car seat. This flexibility enables parents to keep their child in the safer rear-facing position for as long as possible, which is highly recommended by safety experts. The Roundabout easily transitions to forward-facing once the child surpasses the appropriate weight and height limits, making it a long-lasting investment.

Safety is paramount with the Britax Roundabout, which is equipped with innovative technologies designed to enhance protection during a collision. The seat incorporates Britax's SafeCell Impact Protection system, featuring a base that compresses to reduce the impact of a crash and protect the child’s head, neck, and spine. Additionally, the seat comes with side impact protection, which provides extra security in the event of a side collision.

Comfort is also a key aspect of the Roundabout's design. The seat features plush, padded fabric to ensure a cozy ride for your little one. The seat cover is also easy to remove and machine washable, providing convenience for parents when it comes to cleaning up spills and messes.

Installation of the Britax Roundabout is designed to be straightforward and user-friendly. It is equipped with the ClickTight Installation System, which allows for easy and secure installation using the vehicle's seat belt or LATCH system. This technology minimizes the risk of installation errors, which are common with other car seats.

Other notable characteristics include multiple recline positions for added comfort during long journeys and a 5-point harness system that ensures a secure fit for children of different sizes. The Roundabout is also known for its durable construction, which contributes to its longevity and reliability.

In summary, the Britax Roundabout is a convertible car seat that stands out due to its combination of safety features, user-friendly installation, and comfort. As children grow, the Roundabout adapts to their needs, making it a practical choice for parents seeking a dependable and versatile car seat for their family.
Top Page Image Contents