TrackSnap Manual | Model |
Troubleshooting
| Symptom |
| Cause |
|
|
|
|
|
|
| TrackSnap will not power up. |
| Check switch on battery holder is in the on position. |
|
|
|
| Check 9V Alkaline battery |
|
| When I turn power on to my |
| This is the indication that your batteries are low. |
|
|
|
| ||
|
|
| ||
| TrackSnap the PixController |
| The PixController board has a |
|
| board green PIR LED is |
| indicator and when the power supply is too low the |
|
| blinking, and nothing else |
| PIR will shut down, and blink the green LED. The |
|
| happens. |
| camera may take false photos when batteries get |
|
|
|
| low. |
|
|
|
|
|
|
Solution
Turn on switch Replace battery
Change the 9V Alkaline battery
When I use the PixController DIP Switch setting for “Movie Mode” I still get still photos.
What am I doing wrong?
Why is there sometimes nothing in my photo on my outdoor setups?
Camera is not powering up
Picture quality is poor
Object in picture is out of focus
The TrackSnap does not take photos at night or only take photos at night.
Be sure to setup your Sony Camera into Movie taking mode.
Sometimes birds can fly past your camera setup and trigger the camera. A bird flying past can be too fast for this camera to catch.
You may also have a “false photo”. Sometimes on warmer days objects that heat up to warm blooded animal temperatures and move can fool the PIR into thinking an animal walked passed.
Camera batteries are not installed properly Camera batteries are too low for the camera.
Check Camera location and setup.
The TrackSnap default setup is on page 11 and set to infinity. Check the focus setting.
DIP Switches 3 & 4 are set incorrectly.
Night sensor is obstructed.
Refer to your Camera manual for setting this mode.
Try turning down the "PIR Sensitivity POT" to be less sensitive on warmer days
Check and / or replace batteries with either extra Alkaline or charged NiMh rechargeable batteries
See setup tips on pages 2 and 11 of this manual and refer to camera manual for more detailed camera settings
Set focus to correct setting.
See page 5 for correct Day / night setting.
Version | Page 12 of 12 | Draft |
TS S40.01 | This document comprises information provided by Suppliers and is |
|
| assumed to be correct. |
|