Specifications

The correlation between published specifications and performance is unreliable. A list of numbers reveals virtually nothing. All technical measurements must be sub- ject to qualitative as well as quantitative interpretation. Measurements of the Pro- ceed BPA yield excellent results by any standards. However, only those specifica- tions that apply to its actual operation are included here. All specifications are subject to change at any time, in order to improve the product.

■Rated power output:125 w/ch rms @ 8Ω , all channels driven, 20 Hz–20 kHz with no more than 0.1% THD

		250 w/ch into 4Ω
■	Frequency response:	within 0.1 dB from 20 Hz to 20 kHz
■	Signal to Noise ratio (main outputs):	better than –80 dB (ref. 1 w)
■	Input impedance:	30kΩ (balanced)
		100kΩ (single-ended)
■	Voltage gain:	23 dB (balanced)
		29 dB (single-ended)
■	Input sensitivity:	2.4 V for full rated output (balanced)
	1.2 V for full rated output (single-ended)
■	Power consumption:	typically 140 W at idle (BPA 2)
		typically 210 W at idle (BPA 3)

■Mains voltage:determined by the needs of country for which the unit was manufactured; cannot be reset by dealer or user

■	Overall dimensions:	See “Dimensions”
■	Shipping weight:	47 lbs. (21.4 kg) for BPA 2
		61 lbs. (27.7 kg) for BPA 3
■	Connector Complement:	two binding posts per channel
	one 3-pin XLR balanced input connector per channel
		1 RCA input connector per channel
		1 1⁄8" mini-jack for remote turn-on
		one IEC AC mains connector
■	Output impedance:	less than 0.05Ω

For more information, see your Proceed dealer, or contact:

Madrigal Audio Laboratories, Inc.

P.O. Box 781

2081 South Main Street (Route 17) Middletown, Connecticut 06457 USA Telephone (860) 346-0896

FAX (860) 346-1540

Internet http://www.madrigal.com/

Madrigal provides an owner-transferable, five year extended warranty on all Proceed products within the U. S. and Canada ONLY. Warranty and service policies outside the U. S. and Canada are set by the local, authorized distributor and are applicable in the country of purchase ONLY. Madrigal

products are designed to operate at set voltages appropriate for the country of sale and may be damaged if operated at the wrong voltage.contact your local dealer or distributor.

BPA 3, BPA 2 specifications

Madrigal Imaging is at the forefront of innovative imaging technologies, particularly with its BPA 2 and BPA 3 systems, which are designed to enhance diagnostic capabilities in medical imaging. These systems are specifically engineered to meet the demands of modern medical practices while providing high-quality imaging results.

The BPA 2 is renowned for its speed and efficiency. One of its main features is the advanced digital signal processing technology that allows for clearer images in less time. This system employs a unique algorithm that enhances image acquisition, resulting in improved visibility of anatomical structures. The BPA 2 also supports a wide range of imaging modalities, including X-ray, MRI, and ultrasound, making it a versatile tool in any medical facility.

Another significant feature of the BPA 2 is its intuitive user interface, designed to streamline workflow for healthcare professionals. The user-friendly design minimizes the learning curve for new users and allows for quick adjustments to imaging parameters. This enhances productivity, enabling healthcare providers to focus more on patient care and less on navigating complex systems.

Moving to the BPA 3, this next-generation imaging system builds on the strengths of the BPA 2 and incorporates cutting-edge technologies. One of its key characteristics is the integration of Artificial Intelligence (AI) and machine learning algorithms that assist radiologists by automatically analyzing images and highlighting areas of concern. This not only aids in faster diagnosis but also helps in reducing human error.

Furthermore, the BPA 3 features an advanced image reconstruction technology that dramatically improves image quality. This system utilizes deep learning algorithms to produce high-resolution images with reduced noise, giving clinicians a clearer view of the patient’s condition. Additionally, BPA 3 is designed with an emphasis on patient comfort. Its ergonomic design and faster imaging times are intended to minimize radiation exposure and reduce patient anxiety during procedures.

Both the BPA 2 and BPA 3 are equipped with robust data management solutions, allowing for seamless integration with existing hospital information systems. This ensures that imaging data can be easily shared among healthcare providers, enhancing collaboration and improving patient outcomes.

Overall, Madrigal Imaging's BPA 2 and BPA 3 systems represent significant advancements in medical imaging technology, combining high-quality image capture with user-friendly interfaces and innovative features that prioritize both patient care and operational efficiency.