12 VISUAL TROUBLESHOOTING OF PROCESS E-6
Once you have eliminated improper film storage and incorrect exposure as causes of
A visual check of the processed film is one way to make an initial diagnosis. You can make a more thorough determination of the cause of processing problems and the corrective action to take by plotting and evaluating your
Table
Troubleshooting from the Appearance of Processed Film
Appearance of Film
Possible Cause
Very High Maximum | No Edgeprint | First developer omitted | |
Density (very dark | Visible |
| |
no apparent image) |
|
| |
Edgeprint | First developer and color developer reversed | ||
| |||
| Visible | Film not exposed | |
|
|
| |
Dark Overall |
| Inadequate time or low temperature in first developer | |
|
| First or color developer diluted or exhausted | |
|
| Color developer starter added to first developer | |
|
| Too much first developer starter used | |
|
| First developer or first and color developers underreplenished | |
|
| ||
Very Dark (overall or in random areas) | Bleach or fixer (or both) omitted, reversed, diluted, exhausted, or underreplenished | ||
|
|
| |
LIght Overall |
| Too much time or high temperature in first developer | |
|
| Film fogged by light before processing | |
|
| First or color developer (or both) too concentrated | |
|
| First or color developer (or both) overreplenished | |
|
| First developer starter omitted | |
|
| First developer contaminated with reversal bath or color developer | |
|
| First developer contaminated with fixer | |
|
| ||
Image Very Faint or No Image | First developer used twice or color developer omitted | ||
(film may show colored streaks) | Severe light fog | ||
|
| ||
Overall Density Variation from Batch to Batch | Inconsistent | ||
|
|
| |
Blue |
| First developer contaminated with fixer | |
|
| Reversal bath overconcentrated | |
|
| Too little first developer starter used | |
|
|
| |
Cyan |
| ||
|
|
| |
Yellow |
| ||
|
| Too much first developer starter used | |
|
| Inadequate bleaching or fixing | |
|
|
| |
| First developer with color developer starter added | ||
|
| Underreplenishment of first developer or color developer | |
|
| ||
Low Density Blue; High Density Yellow | Color developer contaminated with fixer | ||
|
|
| |
Green |
| Reversal bath exhausted, diluted, or underreplenished | |
|
| Film fogged by green safelight | |
|
| Wash used between color developer and reversal bath | |
|
| Color developer dilute | |
Color pH high
Too much Part A in color developer
Overreplenished color developer
A dilute color developer
Color developer mixed using first developer starter
Using KODAK Chemicals, Process |
|