Your Phone’s Modes
Standby Mode
Standby mode is the state of the phone once it has found service and is idle. The phone goes into Standby mode:
•After you power the phone on.
•When you press 
after a call or from within a menu.
In Standby mode, the time, day, and date as well as all phone status icons display.
Place Calls in Standby Mode
1.While in Standby mode, enter a phone number, and press
to place a call.
2.Press 
to return to Standby mode.
Receive Messages in Standby Mode
You can receive messages in Standby mode. An alert tone sounds and a notification message appears in the display when a new message arrives.
The following call message options display:
•View Now — This selection allows you to view the messages now.
•View Later — This selection allows you to view the messages at a later date.
Highlight the desired viewing option and then press 
.
Adjust the Ringer
In Standby mode, press the Volume key (on the left side of the phone) up or down.
1.In Standby mode, press the Volume key up or down to set the call ringer volume as desired. Options are:
• Silence All | • Medium |
• Vibrate | • Medium/High |
• Low | • High |
•Low/Medium
2.To enable vibration, press the Vib. on soft key.
3.When you are satisfied with the setting, press SET. The phone returns to Standby mode.
Tip: You can also enter the Master Volume
Note: The Vibrate icon ( 
) appears in the display when the phone is in Vibrate mode. The Vibrate/Ring icon ( ) appears in the display when the phone is in Ring with Vibrate mode.
17