Harmony House JT50, JT100 manual J8 Expression Pedal Calibration, Tuner

Page 16

Johnson Mirage User’s Guide

Section Three - Other Functions

Tuner

The Bank Up switch will also activate the tuner. To activate the tuner, press and hold the Bank Up switch for 2 seconds. Once the tuner mode is activated, the J8 display will read “tu.” At that point, any note played will register in the display. The 7 LEDs above the display will provide an indication as to whether the note is flat, sharp, or in tune. When the single green LED in the center is lit, the note is in tune. If LEDs to the left are lit, your note is flat and must be tuned up. If LEDs to the right are lit, your note is sharp and must be tuned down. To exit the tuner mode, simply press any footswitch.

Expression Pedal

The expression pedal on the J8 can be used as a volume pedal or a wah wah pedal. In normal operation of the JT50/JT100, the J8’s Expression Pedal will be a volume pedal. To change the function to a wah, simply rock the pedal all the way forward (toe down) and apply pressure on switch under the toe. This will activate the wah. To disengage the wah effect, just repeat this toe down procedure and the expression pedal will control the volume again.

J8 Expression Pedal Calibration

Follow these steps when connecting the J8 to the amplifier for the first time:

1.Begin with the power turned off on your amplifier.

2.Using the supplied 5-pin DIN cable, connect from the controller output jack on the back of the J8 to the J8 Foot Controller jack on the back of your amplifier.

3.Power up the amplifier.

4.On the Mirage series amplifiers, the J8 will enter a calibration mode the first time it is connected. The J8 display will briefly flash 1.X (software version number) followed by Pb.

5.Rock the J8's expression pedal back (toe up position) and press any footswitch.

6.The display will now read PF. Rock the expression pedal forward (toe down position) and press any foot switch.

If the Expression Pedal fails to work with the JT50/JT100, it may need to be recalibrated . To recalibrate the J8's expression pedal do the following:

1.Begin with the power off.

2.Press and hold the Preset 1 button while turning the power on.

3.When --appears in the display of the J8, release Preset 1 button and press the Tap-It/Shift button.

4.The display on the J8 will read “Pb” for pedal back. Rock the expression pedal back (toe up) and press any button on the J8.

5.The display on the J8 will now read “ Pf” for pedal forward. Rock the expression pedal forward (toe down) and press any button. The

J8's

expression pedal is now calibrated. The displays will return the to bank and channel number currently in use.

If “Er” appears in the display, an error has occurred in the calibration procedure. Follow steps 1-5 again.

Headphones

For those times when you want to turn it up without getting thrown out of the house, the JT50/JT100 include a Headphone jack. Simply connect a pair of stereo headphones to the rear panel Headphone jack, and the speaker will automatically be disabled. The JT50/JT100’s Master Volume adjusts the Headphone level.

Direct Output

The Mirage provides you with the option of running speaker compensated direct outputs to your house PA system or a recording console. This eliminates the need to mic your speaker. To utilize this feature, you will need a 1/4” stereo “Y” cord. Connect the stereo Y cord to the Headphone jack on the rear panel of the JT50/JT100. Connect both of the other ends of the Y to two channels of the mixer, and pan those two channels opposite of each other. This will provide your mixing console with a speaker compensated stereo signal. Connecting a plug to the Headphone jack will automatically disable the internal speaker of the JT50/JT100. To enable the speaker while using the Headphone/Direct Out, press and hold the Tap-It/Shift button while inserting the plug into this jack.

If the JT50/JT100 is powered up while a connection is made to the Headphone/Direct Out, the speaker will be automatically disabled. Holding the Tap-It/Shift button while engaging the power will enable the speaker.

12

Page 15 Page 17
Image 16
Page 15 Page 17
Contents User’s Guide Important Safety Instructions Declaration of Conformity Table of Contents Mirage JT50/JT100 Features IntroductionQuick Start Optional Foot Controller ConnectionsGuided Tour of the Mirage JT50/JT100 Top PanelRear Panel Preset Section About the Mirage JT50/JT100Amp Section Effects SectionUsing the Mirage JT50/JT100 Getting StartedMaking Connections Plug and PlayCreating or Editing a Preset Powering the JT50/JT100Selecting a Preset Selecting an Amp ModelAdding Effects Adjusting the Amp ControlsModulation/Pitch Shifting Effects Delay Adjusting the Gate ThresholdNoise Gate VibratoStoring/Copying a Preset To store or copy a presetReverb Hall ReverbEffect Foot Switches Preset Foot SwitchesBank Foot Switches Other FunctionsTuner J8 Expression Pedal CalibrationExpression Pedal Resetting the Mirage JT50/JT100 Effects LoopMirage Factory Preset List AppendixJohnson Mirage User’s Guide Section Four Appendix

JT100, JT50 specifications

Harmony House is a renowned name in the world of home automation, and their latest offerings, the JT50 and JT100, are setting new standards in comfort, connectivity, and control. These innovative home systems seamlessly integrate smart technologies to create a harmonious living environment that caters to modern lifestyles.

The Harmony House JT50 is designed for mid-sized homes, providing an intuitive smart home experience. One of its standout features is the integrated voice control system, which allows residents to operate various appliances, lighting, and climate controls hands-free. The JT50 is equipped with smart sensors that monitor temperature, humidity, and even air quality, ensuring that the home environment is not only comfortable but also healthy.

Moreover, the JT50 employs energy-efficient technologies, including smart thermostats that learn the homeowner’s schedule and adjust settings accordingly to save energy without sacrificing comfort. The system can also optimize energy usage by scheduling appliances to run during off-peak hours, contributing to lower utility bills.

In contrast, the Harmony House JT100 is suitable for larger residences and offers expanded capabilities. This advanced model includes all the features of the JT50 but adds a more robust security framework. The JT100 supports advanced surveillance cameras and alarm systems that can be monitored in real-time from a smartphone or tablet. Additionally, it features facial recognition technology to enhance home security and ensure that only recognized individuals can access the premises.

Both models are compatible with a variety of smart home devices, allowing users to customize their systems according to their preferences. From smart lighting to automated window treatments, the possibilities are endless. The user interface is designed to be user-friendly, making it accessible for all family members, regardless of their tech-savviness.

Furthermore, both the JT50 and JT100 come with Harmony House’s mobile app, which provides full control over the home automation system from anywhere. Through the app, users can receive notifications, monitor energy usage, and even set up custom automation routines that adjust settings based on the time of day or the homeowner’s presence.

In summary, the Harmony House JT50 and JT100 bring a new level of convenience and security to modern living. With their emphasis on smart technology, energy efficiency, and user-friendly design, these systems are perfect for anyone looking to enhance their home environment while embracing the benefits of automation. Whether you choose the compact JT50 or the advanced JT100, you are investing in a future where comfort and technology work hand in hand.
Top Page Image Contents