Balanced RCA input and operation

Balanced XLR input and operation

The balanced mode can only be used if the preamplifier has a balanced output. In order to use the balanced XLR- input, turn off the amplifier, and remove the shorting plugs from the negative (-) RCA inputs.Use an XLR interconnect with GND on pin 1, + on pin 2 and - on pin 3.

The balanced mode can only be used if the preamplifier has a balanced output. Be sure the amplifier is turned off. Remove the shorting plugs. Use 2 single (1 stereo) interconnect cables from the preamplifier to the power amplifier, connecting + and - outputs from the preamplifier to the + and - inputs of the corresponding channel on the amplifier.

Make sure the + and - are not interchanged, as this will cause the system to operate out of phase, with very poor bass response as a result.

Operating instructions: How to turn on your system

You should always turn on your equipment in this order: Signal source devices (CD, tuner, etc) and preamplifier are turned on first. Allow 30 seconds of preheating before you turn on your power amplifier.When turning your system off, you should start by switching off your power amplifier, then the preamplifier, and finally your signal source devices

After switching on the power amplifier, there will be a 5 seconds delay before the speakers are connected. This will prevent large turn on/off transients to reach the speakers.

Replacing a blown main fuse:

Always remove the AC cord from the Inlet

The main fuse is located inside a small drawer in the AC inlet of the unit. If, for some reason the fuse blows, turn the unit off, and remove the AC cord from the inlet.

Open the drawer with a small screwdriver and remove the broken fuse. The spare fuse is located in the hole in front of the main fuse. Push the new fuse gently out of the hole, and place it in correct position (where the blown fuse was removed). Push the drawer gently back to the closed position, connect the power cord and turn the unit on.

Never replace a blown fuse with other values than printed on the unit.

AW-250 specifications

The Fine Digital AW-250 is a state-of-the-art digital printer that has captured the attention of industry professionals looking for efficiency and high-quality outputs. This model stands out for its versatility and advanced printing technologies designed to meet the diverse needs of various businesses.

One of the key features of the AW-250 is its exceptional print resolution. With a maximum resolution of up to 1200 x 1200 dpi, the printer produces sharp and vibrant images, making it ideal for producing everything from marketing materials to fine art prints. The color accuracy and detail provided by the AW-250 help businesses create visually stunning materials that capture attention and leave a lasting impression.

Incorporating advanced digital inkjet technology, the AW-250 allows for a unique and efficient printing process. Unlike traditional printing methods, which often require extensive setup and materials, the AW-250 operates on a digital platform that reduces waste and increases turnaround times. This means that businesses can print shorter runs without incurring excessive costs, making it a flexible solution for a variety of print jobs.

The AW-250 is equipped with a range of software solutions that enhance its usability. These software options include user-friendly interfaces that facilitate easy file handling and color management, ensuring that users can optimize their prints effortlessly. Compatibility with a wide array of file formats also allows for seamless integration into existing workflows.

Another notable characteristic of the AW-250 is its robust construction and reliability. Designed to withstand the demands of high-volume printing, this model ensures consistent performance without sacrificing quality. Its advanced maintenance features also help reduce downtime, allowing businesses to stay productive.

The printer supports a variety of substrates, including paper, vinyl, and fabric, making it a versatile choice for projects such as banners, signage, and promotional materials. This adaptability ensures that the AW-250 caters to the diverse requirements of different industries.

In conclusion, the Fine Digital AW-250 is a technologically advanced digital printer that combines high-quality output, fast printing capabilities, and user-friendly software to support a wide range of printing needs. Its ability to produce exceptional results on various substrates makes it a valuable asset for businesses looking to enhance their print offerings.