El Paso Chile Company DMS 3120-120, DMS 3080-80 Setting More than ONE Function, Any, Input, Off

Page 8

®

PROFESSIONAL AUDIO & SOUND

DIGITAL MUSIC AMPLIFIERS DIGITAL MUSIC SERIES

TM

FUNCTION SWITCHES AND JUMPERS

UNDERSTANDING THE INPUT FUNCTIONS

 

SETTING THE VOX AND MUTE JUMPERS

 

 

 

DUAL VOX AND DUAL MUTE - The Amplifier provides two inde- pendent VOX (V1 & V2) and two MUTE (M1 & M2) SYSTEMS

FUNCTION SOCKETS - EACH INPUT IS PROVIDED WITH A VOX (V1 & V2) AND A MUTE (M1 & M2) SOCKET.

INPUTS VOX AND MUTE FUNCTION - All Inputs including the Module provide 2 - VOX SEND and 2 MUTE RECEIVE functions. The VOX and MUTE functions are SWITCHED-ON, on each Input, by Internal Jumpers provided for each Input. Two VOX BUSS SEND (V1 & V2) and two MUTE BUSS RECEIVE (M1 & M2) can be independently or simultaneously SWITCHED-ON to suit the application requirement.

JUMPER SETTINGS - The VOX and MUTE Functions are SWITCHED-ON or OFF by setting the JUMPERS on the VOX (A) and MUTE (B) SOCKET. See Fig. 8A.

The SOCKETS are located on the Main PCB inside the Amplifier as shown on the SWITCHES and JUMPERS LOCATION DIA- GRAM in this Manual. Each Socket is identified by an ID NUMBER and the FUNCTION and DEFAULT settings are listed on the FUNCTION SWITCHES and JUMPERS DEFAULT SETTING TABLE in this Manual.

TO SET: Lift the Jumper and reset as required. making sure that the JUMPER is properly positioned over the two shorting pins.

VOX SEND

SOURCE IN

V1

TO VOX BUSS 1

TO VOX BUSS 2

V2

ANY

AUDIO OUT

INPUT

 

The VOX JUMPER has three positions:

OFF, V1 and V2

The MUTE JUMPER has three positions:

OFF, M1 and M2

 

VOX JUMPERS

MUTE JUMPERS

 

 

SOCKET

SOCKET

 

SOCKET

 

SW215

SW220

 

ID NO.

 

JUMPER

 

 

 

 

OFF JUMPER

OFF JUMPER

 

 

V 1

 

M 1

 

 

V 2

 

M 2

 

Vox Mute Socket

A

B

 

 

 

 

MUTE RECEIVE

M1

DMS Anyinput M2

FROM MUTE BUSS 1

FROM MUTE BUSS 2

Fig. 8A - VOX and MUTE Sockets

Fig. 8 - Any Input VOX and MUTE Functions

The figure below shows how the VOX 1 Logic Switch and the MUTE 2 Logic Switch are SWITCHED-ON by moving the Jumpers from the OFF position to the V 1 and M 2 position. When the Input is activated by a Source signal the corresponding VOX Signal is sent to the V1 BUSS. When the VOX 2 is activated by another Input the MUTE Signal is present on the MUTE 2 BUSS and it will MUTE this Input

 

 

OFF

 

 

V1

 

VOX 2 BUSS ON

 

 

JUMPER

 

VOX SEND

 

 

X

 

V2

 

 

SW215

VOX 2 BUSS OFF

 

 

SOURCE IN

AUDIO OUT

JUMPER

ANY

 

INPUT

 

 

 

 

 

SW220

 

 

OFF

MUTE 1 BUSS OFF

 

M1

X

MUTE RECEIVE

 

 

 

 

M2

JUMPER

 

DMS Anyinput 02

 

MUTE 2 BUSS ON

 

 

 

SETTING MORE THAN ONE FUNCTION

More than one JUMPER may be used on a VOX SOCKET as shown below. In this example both the VOX 1 and VOX 2 functions are SWITCHED -ON when the Input is activated. For this purpose additional JUMPERS are packed with each Amplifier.

OFF

VOX 1 BUSS ON

V 1

JUMPER

VOX SOCKET

 

V 2

JUMPER

Vox Socket 01

VOX 2 BUSS ON

A

 

More than one JUMPER may be used on a MUTE SOCKET as shown below. In this example both the MUTE 1 and MUTE 2 func- tions will MUTE this INPUT when either VOX 1 or VOX 2 are acti- vated by other INPUTS.

OFF

MUTE 1 BUSS ON

M 1 JUMPER

MUTE SOCKET

M 2 JUMPER

 

Mute Socket 01

B

MUTE 2 BUSS ON

 

 

 

NOTE: BE SURE NOT TO SET BOTH THE VOX AND CORRE- SPONDING MUTE ON THE SAME INPUT OR THE INPUT WILL MUTE ITSELF WHEN ACTIVATED.

Fig. 8B - Any Input VOX 1 and MUTE 2 Activated

EXAMPLE: INPUT 1 - V 1 and M 1 BOTH ON.

 

 

 

 

PAGE 8

SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE

DMS3040/3080/3120

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Digital Music Amplifiers Description and Applications Specifications Digital Music Amplifiers Digital Music SeriesRead Before Operating Rack MountingDmstm Speaker Output WattMain Board Rear PanelSwitch AUX Module in Source AUX 1 or AUX Switch AUXSwitch OFF Switch OUTSetting More than ONE Function ANYInput OFFFunction Settings Examples VOX Mute Jumpers SettingExample 9A Example 9BWiring Three Leads Balanced Microphone WiringTWO Leads Unbalanced Microphone Wiring CableShield Muting Priority SettingsMuting Switch Input Connections Condenser and Electret Microphones Configuration Tables Phantom Power SelectorsWiring Balanced Telephone Paging Wiring VOX Mute Jumpers Setting Installation and Wiring Paging from the Telephone SystemTelephone System Paging Wiring AUX 1 MIC 4 Switch Installation and Wiring Setting Input 4 AS AUXInput 4/AUX 1 Default Setting Installation and Wiring Setting Input 5 AS AUX Input 5/AUX 2 Default SettingAUX 2 MIC 5 Switch Setting the AUX 2 Input AttenuatorVOX Sensitivity Adjustment VOX Jumpers Default Setting TableInstallation and Wiring Addressable Dual VOX System VOX Voice Activated MutingMute Jumpers Default Setting Table Addressable Dual Muting SystemDirect Muting Input 4/AUXInput 1 MIC 1 Unmuting Function Wiring Direct Unmuting Access to Unmuting JumperSettings on Amplifiers 1 Input 1 MIC 1 Unmuting FunctionSwitches Satellite ReceiverInstallation and Wiring External Equalizer Link SET EQ Link Switch to SET Tone by Pass Switch to onMIX Buss Bridging CableRemote Volume Control Optional Accessory Remote Volume ControlsMaster Volume Operation Input 4 AUX 1 OperationModule Type Installation and Wiring Installing a ModuleInstallation Connector Contacts MOH and Zone 1-2 Operation Issues Zone 1 MOH and 8 OHM OutputsMOH ZONE1 & 2 Amplifier Functions MOH AmplifierMOH/ZONE 1 Amplifier Source Selector MOH ConnectionsMusic on Hold Amplifier Using Speakers for Zone 1 Zone Zone 1 and 2 OperationInput Source Selector Dual Program Source CapabilityUsing Four 8 OHM Speakers PER Zone Zone 1 Zone 2 Connecting SpeakersUsing a Single 8 OHM Speaker PER Zone Installation and Wiring Regulated Auxiliary Power Supply Volt Power SupplyWire Gauge Resistance Table VOX Relay VOX Relay FunctionsBe Sure That the Tone Bypass Switch is in the on Position Using the EQ LinkEqualizing the Program only Music OutputAUX5INPUT2 Settings RESTAURANT/DINER with Music and Jukebox APP. DataAuto Service Station C Store APP. Data Input 4 AUX 1 SettingsReplacement Parts Repair ServiceWarranty Repair Service OUT of Warranty Repair Service

DMS 3080-80, DMS 3120-120, OM163, DMS 3040-40 specifications

El Paso Chile Company, renowned for its premium quality products, brings you four standout products: DMS 3040-40, OM163, DMS 3120-120, and DMS 3080-80. Each product offers unique features and technologies that cater to various culinary needs.

DMS 3040-40 is a versatile chile sauce that combines authentic flavors with robust ingredients. It features a balanced blend of green and red chiles, allowing it to complement a wide variety of dishes. This sauce is crafted using traditional recipes infused with modern techniques, ensuring a consistent taste and quality. The DMS 3040-40 is particularly praised for its rich flavor profile, which enhances tacos, enchiladas, and grilled meats.

OM163 is a savory blend designed for those looking for a kick in their meals. This product stands out with its unique combination of spices and chilies, resulting in a bold flavor that can elevate comfort foods or even gourmet dishes. The formulation includes natural preservatives that extend shelf life while maintaining a clean label, appealing to health-conscious consumers. OM163 is ideal for marinades, dips, and infused oils, making it a staple in any kitchen.

DMS 3120-120 is designed to cater to the chili enthusiast seeking intense flavor and heat. With a heat level that packs a punch, this product is perfect for those who enjoy a spicier experience. The DMS 3120-120 utilizes a specific processing technology that locks in the fresh taste of the ingredients, providing an authentic and fiery kick. It works exceptionally well in salsas and barbecue sauces, giving a genuine southwestern flair to various dishes.

Finally, DMS 3080-80 is a robust chili paste known for its ease of use in multiple recipes. This product has a thicker consistency, allowing it to adhere well to meats and vegetables, thereby intensifying flavors. DMS 3080-80 is made with high-quality chiles and a proprietary blend of spices, resulting in an authentic taste that shines through in any application. Ideal for stews, chilis, and casseroles, it simplifies meal preparation while delivering undeniable taste.

In summary, the El Paso Chile Company's DMS series encapsulates quality and versatility, making it a go-to choice for consumers seeking fantastic flavors for their culinary adventures. Each product showcases a commitment to quality and innovation, appealing to a wide range of palates and preferences.
Top Page Image Contents