El Paso Chile Company DMS 3120-120, OM163 Addressable Dual VOX System VOX Voice Activated Muting

Page 16

®

PROFESSIONAL AUDIO & SOUND

DIGITAL MUSIC AMPLIFIERS DIGITALMUSIC SERIES

TM

INSTALLATION AND WIRING

ADDRESSABLE DUAL VOX SYSTEM

VOX - VOICE ACTIVATED MUTING

DUAL VOX - VOICE ACTIVATED MUTING - The Amplifier is equipped with a DUAL noiseless, fast acting Logic VOX Switching System. When any of the INPUTS are activated and a Signal is present on a given INPUT and either VOX 1 or VOX 2 or BOTH are Switched-ON (using internal Jumpers) then the MUTE 1 or MUTE 2 BUSS or BOTH are ACTIVE. If any of the INPUTS have the MUTE 1 or MUTE 2 Switched-ON (by Internal Jumpers) then the INPUT (or INPUTS) will be MUTED according to the Jumpers Setting. Once the SIGNAL-ON on the ACTIVE INPUT is terminated the normal functions are automatically restored on all muted inputs.

ACCESS TO VOX AND MUTE JUMPERS

REFER TO JUMPERS AND SWITCHES INTERNAL ACCESS.

CAUTION: PRIOR TO PERFORMING THE ABOVE OPER- ATION BE SURE TO FOLLOW THE SAFETY NOTES REFERRING TO THE REMOVAL OF THE AMPLIFIER COVER.

VOX SENSITIVITY CONTROLS

VOX 1 AND VOX 2 SENSITIVITY CONTROLS

The VOX 1 and VOX 2 Sensitivity Controls set the sensitiv- ity level at which point the VOX 1 and VOX 2 are respective- ly engaged during INPUT ACTIVATION. The VOX Sensitivity Controls are located on the Amplifier Rear Panel.

VOX 1 SENSITIVITY CONTROL = Reference 33 VOX 2 SENSITIVITY CONTROL = Reference 32

VOX SENSITIVITY CONTROLS

VOX-1 VOX-2 MUTE-2

SENS SENS DELAY

33 32 31

DMS3120 Vox Sens 01

Fig. 16 - Rear Panel VOX 1 and VOX 2 Sensitivity Control

and MUTE 2 Delay Control

VOX SENSITIVITY ADJUSTMENT

VOX SENSITIVITY ADJUSTMENT

1)Turn all Front Panel Input Level Controls to 0.

2)Turn VOX Sensitivity Control counterclockwise until it stops.

3)Connect a Signal Source (Microphone, Telephone or Music) to the respective Input Terminals (For connection details refer to the appropriate section in this Manual).

4)While talking from a Paging Source (Microphone or Telephone) or Playing Music rotate the INPUT LEVEL CON- TROLS (Front Panel) until the desired output level is achieved.

5)While talking from a Paging Source (Microphone or Telephone) or Playing Music, turn the Sensitivity Control (VOX 1 or VOX 2) slowly clockwise until the Muting (MUTE 1 or MUTE 2) is activated.

VOX JUMPERS DEFAULT SETTING TABLE

JUMPER

JUMPER

FUNCTION

FACTORY

FACTORY

ID NO.

REFERENCE

DESCRIPTION

SETTING

SETTING

 

 

 

 

 

 

 

MAIN PCB JUMPERS

 

 

 

 

 

 

 

SW210

INPUT 2 -

VOX1 - VOX2 - OFF

OFF

 

SW211

INPUT 3 -

VOX1 - VOX2 - OFF

OFF

 

SW212

INPUT 4 -

VOX1 - VOX2 - OFF

OFF

 

SW213

INPUT 5 -

VOX1 - VOX2 - OFF

OFF

 

SW214

TEL IN -

VOX1 - VOX2 - OFF

 

V1

SW215

INPUT 1 -

VOX1 - VOX2 - OFF

 

V1

SW221

MODULE -

VOX1 - VOX2 - OFF

OFF

 

 

 

 

 

 

PAGE 16

SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE

DMS3040/3080/3120

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Digital Music Amplifiers Description and Applications Specifications Digital Music Amplifiers Digital Music SeriesRead Before Operating Rack MountingDmstm Speaker Output WattMain Board Rear PanelSwitch AUX Module in Source AUX 1 or AUX Switch AUXSwitch OFF Switch OUTSetting More than ONE Function ANYInput OFFFunction Settings Examples VOX Mute Jumpers SettingExample 9A Example 9BWiring Three Leads Balanced Microphone WiringTWO Leads Unbalanced Microphone Wiring CableMuting Switch Muting Priority SettingsShield Wiring Configuration Tables Phantom Power SelectorsInput Connections Condenser and Electret Microphones Telephone System Paging Wiring Installation and Wiring Paging from the Telephone SystemBalanced Telephone Paging Wiring VOX Mute Jumpers Setting Input 4/AUX 1 Default Setting Installation and Wiring Setting Input 4 AS AUXAUX 1 MIC 4 Switch Installation and Wiring Setting Input 5 AS AUX Input 5/AUX 2 Default SettingAUX 2 MIC 5 Switch Setting the AUX 2 Input AttenuatorVOX Sensitivity Adjustment VOX Jumpers Default Setting TableInstallation and Wiring Addressable Dual VOX System VOX Voice Activated MutingMute Jumpers Default Setting Table Addressable Dual Muting SystemDirect Muting Input 4/AUXInput 1 MIC 1 Unmuting Function Wiring Direct Unmuting Access to Unmuting JumperSettings on Amplifiers 1 Input 1 MIC 1 Unmuting FunctionSwitches Satellite ReceiverInstallation and Wiring External Equalizer Link SET EQ Link Switch to SET Tone by Pass Switch to onMIX Buss Bridging CableRemote Volume Control Optional Accessory Remote Volume ControlsMaster Volume Operation Input 4 AUX 1 OperationInstallation Installation and Wiring Installing a ModuleModule Type Connector Contacts MOH and Zone 1-2 Operation Issues Zone 1 MOH and 8 OHM OutputsMOH ZONE1 & 2 Amplifier Functions MOH AmplifierMusic on Hold Amplifier MOH ConnectionsMOH/ZONE 1 Amplifier Source Selector Using Speakers for Zone 1 Zone Zone 1 and 2 OperationInput Source Selector Dual Program Source CapabilityUsing a Single 8 OHM Speaker PER Zone Zone 1 Zone 2 Connecting SpeakersUsing Four 8 OHM Speakers PER Zone Installation and Wiring Regulated Auxiliary Power Supply Volt Power SupplyWire Gauge Resistance Table VOX Relay VOX Relay FunctionsBe Sure That the Tone Bypass Switch is in the on Position Using the EQ LinkEqualizing the Program only Music OutputAUX5INPUT2 Settings RESTAURANT/DINER with Music and Jukebox APP. DataAuto Service Station C Store APP. Data Input 4 AUX 1 SettingsReplacement Parts Repair ServiceWarranty Repair Service OUT of Warranty Repair Service

DMS 3080-80, DMS 3120-120, OM163, DMS 3040-40 specifications

El Paso Chile Company, renowned for its premium quality products, brings you four standout products: DMS 3040-40, OM163, DMS 3120-120, and DMS 3080-80. Each product offers unique features and technologies that cater to various culinary needs.

DMS 3040-40 is a versatile chile sauce that combines authentic flavors with robust ingredients. It features a balanced blend of green and red chiles, allowing it to complement a wide variety of dishes. This sauce is crafted using traditional recipes infused with modern techniques, ensuring a consistent taste and quality. The DMS 3040-40 is particularly praised for its rich flavor profile, which enhances tacos, enchiladas, and grilled meats.

OM163 is a savory blend designed for those looking for a kick in their meals. This product stands out with its unique combination of spices and chilies, resulting in a bold flavor that can elevate comfort foods or even gourmet dishes. The formulation includes natural preservatives that extend shelf life while maintaining a clean label, appealing to health-conscious consumers. OM163 is ideal for marinades, dips, and infused oils, making it a staple in any kitchen.

DMS 3120-120 is designed to cater to the chili enthusiast seeking intense flavor and heat. With a heat level that packs a punch, this product is perfect for those who enjoy a spicier experience. The DMS 3120-120 utilizes a specific processing technology that locks in the fresh taste of the ingredients, providing an authentic and fiery kick. It works exceptionally well in salsas and barbecue sauces, giving a genuine southwestern flair to various dishes.

Finally, DMS 3080-80 is a robust chili paste known for its ease of use in multiple recipes. This product has a thicker consistency, allowing it to adhere well to meats and vegetables, thereby intensifying flavors. DMS 3080-80 is made with high-quality chiles and a proprietary blend of spices, resulting in an authentic taste that shines through in any application. Ideal for stews, chilis, and casseroles, it simplifies meal preparation while delivering undeniable taste.

In summary, the El Paso Chile Company's DMS series encapsulates quality and versatility, making it a go-to choice for consumers seeking fantastic flavors for their culinary adventures. Each product showcases a commitment to quality and innovation, appealing to a wide range of palates and preferences.
Top Page Image Contents