Cobalt Networks 9006 owner manual Board Installation, Cable Connections

Page 11

Board Installation

Use the following steps to install the card in the openGearTM 8310 frame:

1. Refer to the Owner’s Manual of the openGearTM 8310 frame to ensure that the frame

 

 

is properly installed according to instructions.

 

 

 

 

 

 

Heat and power distribution requirements within a frame may dictate

 

 

 

specific slot placement of cards. Cards with many heat-producing

 

 

 

components should be arranged to avoid areas of excess heat build-up,

 

Warning

 

particularly in frames using convection cooling.

 

 

 

 

 

 

2. After selecting the desired frame installation slot, hold the card by the edges and

 

 

carefully align the card edges with the slots in the frame. Then, fully insert the card

 

 

into the frame until the rear connection plugs are properly seated on the midplane and

 

 

rear modules.

 

This completes the procedure for installing the card in the openGearTM 8310 frame.

Cable Connections

This section provides instructions for connecting cables to the installed BNC rear modules on the 8310 series frame backplane. Connect the input and output cables according to the following diagram. The input is internally terminated with 75 Ohms. It is not necessary to terminate unused outputs.

HD/SD SDI Input A

HD/SD SDI

Output A

HD/SD SDI

Output A

HD/SD SDI

Output C

HD/SD SDI

Input C

1 2

3 4

5 6

78

910

HD/SD SDI Input B

HD/SD SDI

Output B

HD/SD SDI

Output B

HD/SD SDI

Output C

HD/SD SDI

Output C

Figure 3. BNC Designations for the Card Rear Module RM-9006-A or 8310-RM-100

9006 Owner’s Manual (V 1.0)

Page 11 of 18

Image 11
Contents 9006 Trademarks CopyrightImportant Safety Instructions Important Regulatory and Safety NoticesSymbol Meanings Environmental Information Contents Overview IntroductionThis Chapter Word of ThanksFunctional Block Diagram Documentation Terms Supported Serial RatesUnpacking Installation and SetupStatic Discharge Rear Module Installation Rear Module Installation OptionalCable Connections Board InstallationCard Status Card Control and StatusDashBoard Control System Software Remote ControlMenu System Troubleshooting Checklist Service InformationCase of Problems Warranty and Repair PolicyRelated Products Ordering InformationVisit us at the Cobalt Digital Inc. website Contact UsContact Cobalt Digital Inc

9006 specifications

Cobalt Networks 9006 is a powerful and versatile network device designed for the demands of modern cloud computing and edge networking environments. It represents a significant advancement in network technology, specifically tailored to enhance connectivity, security, and overall network performance.

One of the standout features of the Cobalt Networks 9006 is its robust processing capabilities. With a multi-core CPU architecture, the device can efficiently manage high-throughput network traffic, ensuring minimal latency and seamless data transfer. This performance makes the 9006 ideal for data centers and enterprise networks where large volumes of data need to be transmitted quickly and reliably.

In terms of connectivity, the Cobalt 9006 supports multiple gigabit Ethernet ports, allowing for flexible network configurations and scalability. These ports support various Ethernet standards, enabling compatibility with existing network infrastructure. The device also features advanced load balancing capabilities, which distribute traffic evenly across the network and prevent bottlenecks, enhancing overall efficiency.

Security is a critical component of the Cobalt Networks 9006. The device is equipped with advanced cybersecurity features, such as integrated firewalls, intrusion detection systems, and encryption protocols. These security measures protect sensitive data from unauthorized access and cyber threats, ensuring that networks remain secure in an increasingly hostile digital landscape.

The Cobalt 9006 also incorporates cutting-edge technologies such as software-defined networking (SDN) and network function virtualization (NFV). These technologies provide flexibility in network management, making it easier to customize network configurations to meet specific operational requirements. This adaptability is especially valuable in dynamic environments where rapid changes are common.

Moreover, the Cobalt Networks 9006 is designed with energy efficiency in mind. It features power-saving modes and optimized hardware components that contribute to reduced energy consumption. This not only helps lower operational costs but also aligns with environmental sustainability goals.

Finally, user experience is enhanced by the device’s intuitive management interface. Administrators can easily monitor network performance, manage configurations, and troubleshoot issues through a centralized dashboard, streamlining network management tasks.

In summary, the Cobalt Networks 9006 is a powerful networking solution equipped with advanced processing, versatile connectivity options, robust security features, and innovative technologies that collectively elevate network performance and management. Its energy-efficient design and user-friendly interface further solidify its position as a leading choice for organizations seeking reliable and scalable network solutions.