PART NAME OF REMOTE CONTROL AND KEY FUNCTION
Operation starts by manipulating the Remote Control. Please check and identify the name and location of part.
Transmitter
Low Battery Indicator
Display Window
ON/OFF Button
Temperature Setting Button
High Power Button
One Hour Timer Button
Selector Buttons
CLOSED
ACL Button
Timer Setting/Temperature Setting
Operation Mode Selector Button
Selects the mode (AUTO, HEAT, DRY,
COOL, CIRCULATE)
Airflow Direction Button
Up/Down Air Flow Direction Control
Fan Speed Button
Sleep Operation Button
Timer Cancellation Button
Time Set Button
Celsius (°C) Fahrenheit (°F) | ||||
Selector Switch | ||||
Celsius (°C) | D | D | Fahrenheit (°F) | |
C |
|
|
| F |
|
|
| ||
|
|
|
|
|
OPEN
PREPARATION BEFORE OPERATION
INSTALLING BATTERIES
INSTALLING REMOTE
2
ACL Button
(Front Cover)
1Cover
3
“AM 12:00” Blinking
1.To lift the cover press in and up on the lid latch with your thumb nail.
2.Insert two (2) (AAA) size batteries according to the plus (+) and minus
3.Replace cover.
4.Press the “ACL” button on the face of the Remote.
•When it is attachedCONTROLto the wallHOLDER(S).
2
Push
1
Place
•Place the bottom of the Remote Control on the hook first and then push it into the holder.
NOTE: The transmitting distance may be shorter in a place where the room has electronic lighting equipment.
CURRENT TIME ENTRY
(Example) Setting AM 10:00;
1.Set time AM 10:00 by pressing button.
1• Time can be adjusted by pressing and holding the button. It can also be adjusted in one minute intervals by
2single pressing and releasing the button.
2.Set current time by pressing button.
NOTE: If current time is not set correctly, the timer will not operate normally.
! CAUTION !
•If the batteries are not in use for a prolonged period of time, remove them from the battery compartment to avoid undue draining.
•The batteries can be used for about 6 months. If the Remote Control is not operating even when placing it near the receiver, replace them with 2 new batteries and press the ACL button.
•Please do not use manganese batteries. It may cause the remote to malfunction.
•Avoid extremely hot or cold locations such as placing it near or over a radiator, or in direct sunlight. Also avoid placing it near fluores- cent lighting.
•Do not let children play with the Remote Control.
•To avoid interference, the indoor unit and the Remote control unit should be at least 3 feet away from a TV set or a radio.
•In cases where than two air conditioners are installed in the same room, individual operation may not be possible.
ECR International | 4 | Hyundai Ductless Split System |
