BenQ DC 3410 Adjusting the White Balance, Setting the EV Bias Exposure, Setting Light Metering

BenQ DC 3410 User’s Manual

Adjusting the White Balance

There are five white balance settings to choose from:

Auto: The camera adjusts itself automatically. It is recommended that you use this setting except under unusual lighting conditions.

Daylight: Use this setting in bright outdoor settings or under strong lighting.

Cloudy: Use this setting when taking photos in overcast conditions.

Tungsten: This setting should be used in a tungsten light environment.

Fluorescent: This setting should be used in a fluorescent light environment.

1.Press and to select the image quality menu.

2.Press and to select the resolu- tion setting.

3.Press the Menu MENU button to exit

the menu or use and to move on to the next setting.

Setting the EV Bias (Exposure)

Set the EV bias to increase or decrease the camera lens’ exposure value. This allows more or less light to pass through the lens. Adjusting this setting in particularly bright or dark environments can improve the quality of the photograph. A higher EV bias value results in a brighter photograph.

1.Press and to select the EV

Bias menu.

2.Press or the SET Set button.

3.Press and to change the EV bias value (from -2.0 to +2.0).

4.Press the Menu MENU or Set SET button to confirm your selection

Setting Light Metering

The DC 3410 has three built-in light meter presets that you can use to optimize photo results in various lighting conditions.

Center Average: The camera adjusts itself based on the average light measurement over the center region of the viewfinder.

Point: The camera adjusts itself based on a point light measurement at the center of the viewfinder.

Average: The camera adjusts itself based on the average light measurement over the entire region of the viewfinder.

1.	Press	and	to select the light	3. Press the Menu MENU	button to exit
	metering menu.			the menu or use	and	to
2.	Press	and	to select the meter	move on to the next setting.
	setting.

9