BenQ DC 3410 User’s Manual
1.Enter the setup menu and press 
to select the Copy/Format 
menu icon.
2.Use 
and 
to select one of the following:
Copy to | Copy to Internal Memory | Format Memory |
SD/MMC Card |
|
|
Note: If an SD/MMC card is not inserted, only the “Format Memory” option is available.
\
3.To copy the contents of internal memory, select either the “Copy to SD/MMC Card”
icon or the “Copy to Internal Memory” 
icon and press the Set 
SET button.
4.Use 
and 
to select “Yes” or “No” and press the Set 
SET button to confirm your selection. Press the Menu MENU button to cancel and return to the Setup menu.
5.To format the contents of memory, select the “Format Memory” 
icon and press the Set 
SET button.
6.Use 
and 
to select “Yes” or “No” and press the Set 
SET button to confirm your selection. Press the Menu MENU button to cancel and return to the Setup menu
Note: Formatting memory when an SD/MMC card is installed erases and formats the contents of the card only. To format internal memory, the card must be removed.
Resetting File Names
All still images, audio clips and movie clips are given file names that follow the format “IMG_xxxx.yyy” where “xxxx” is a number from 0001 to 9999 and “yyy” is the file format (JPG, WAV or AVI). The file number is incremented automatically by the camera. Reset this number to “0001” (or the next available number) as follows
1. | Enter the setup menu and press | to select the Reset Filename | menu icon. |
2. | Press the Set SET button and use | and to select “Yes” or “No”. Press the Set | |
SET button to confirm your selection or press the Menu MENU button to cancel and return to the Setup menu.
Setting the Date and Time
Because date and time are stored as metadata with each file recorded by the DC 3410, it is important to set this properly.
1.Enter the setup menu and press 
to select the Set Date and Time 
menu icon.
2.Press the Set 
SET button.
3.Use 
and 
to navigate between year, month, date, hour and minute setting. Press
and 
to adjust the values for each.
4.Press the Set 
SET button or the Menu MENU button to confirm your changes and return to the Setup menu.
16