Sterling SSE-2 operating instructions Material feed, Mounting the suction pipe MV

Page 43

SM4-615

SSE-2

8.6. Material feed

Suction pipes type MV may be tilted by approx. 45 degrees in either direction to the vertical. Addi- tional fastening is not required.

When conveying from the bottom of storage containers (silos), a suction box with 1-3 suction pi- pes is required.

The connection of the suction pipes must be carried out with a piece of flexible line to provide suffi- cient movement.

Please observe that the length of the hose should not exceed 3 meters (10 feet). Push the free pipe end into the flexible line to a depth of approx. 4-5 cm (1.5" - 2"). Connect both parts by means of a hose clamp.

8.7. Mounting the suction pipe MV

The suction pipe consists of an inner pipe (A) and an outer pipe (B) which can be offset against each other.

Connect the inner pipe with the straight end to a flexible hose:

Push the free pipe end into the flexible line to a depth of approx. 4-5 cm (1.5" - 2").

Connect both parts by means of a hose clamp.

Please observe that the length of the hose should not exceed 3 meters (10 feet).

Please check that the outer pipe is not covered as it provides for unhindered access of ambient air.

F

When conveying from silos, material hoppers and storage containers, a

suction box with 1-3 suction pipes is required.

BA

MV

Assembly instructions 8-6

Page 42 Page 44
Image 43
Page 42 Page 44
Contents Sterling Material Processing SSE-2Telephone 800 Edition 07/02 Confirmation number Technical serviceSSE-2 Parts and Service Department Table of contents Technical data Spare parts list Assembly instructionsAccessories Electrical manual General instructions General instructionsSSE-2 Legal basis Explanations and informationFields of applications Safety instructions Safety instructionsGeneral For your safetyAssembly Operation For the operating safety of the equipment Putting into operation Putting into operationChecking the pipe system If the conditions points 3 + 4 are not met Adjusting the suction pipesIf the conditions points 3 + 4 are met Setting the conveying time Setting the controllerConveying capacity is too low Initial conveying operations Switching off the unitError and error correction Error and error correctionFollowing error messages can be displayed SSE-2 Maintenance MaintenanceSSE-2 Servicing the conveyor Maintenance intervalsChanging the sealing ring of the outlet flap Adjusting the flap switch Or optional, active cleaning Cleaning the unitOrder numbers Filter cloth Wire cloth Replacing carbon brushes at turbine InstallationSSE-2 Functional description Functional descriptionGeneral Controller Optional Transport, Assembly and Storage Transport, Assembly and StorageTransport and Packing AssemblyStorage Assembly instructions Assembly instructionsSSE-2 Assembly SM4-615 Welding flange EF 190 is required Mounting on the processing machineMounting onto a machine hopper Material hopper VT 1,0 is requiredMounting onto dosing station DT Mounting onto mixing hoppers with lateral inletDosing hopper DT 30 320 mm high is required Mounting the suction pipe MV Material feedElectrical connection PipeworkInstallation of the signal line of the SKW optional Installation of the flap switch signal lineInstallation of the alarm indicating device optional Installing the accessories Compressed-air supply only SSE-2 with active cleaningTechnical data Technical dataBasic Version Optional FeaturesPerformance Dimension Sheet Spare parts list Spare parts listSSE-2, 230 V, 50 Hz / 110 V, 60 Hz SSE-2, 230 V, 50 Hz SSE-2Pos Order no Designation Wear Code SSE-2, 110 V, 60 Hz SSE-2, 110 V, 60 Hz with active cleaning SSE-2, 230 V, 50 Hz with active cleaningAccessories Accessories Electrical manual Electrical manual
Related manuals
Manual 72 pages 37.93 Kb

SSE-2 specifications

The Sterling SSE-2 is a cutting-edge engineered solution that has carved a niche for itself in the realm of advanced utilities and services. With its sophisticated build and impressive capabilities, the SSE-2 stands as a significant evolution from its predecessor models, setting a new standard in the industry.

One of the most notable features of the Sterling SSE-2 is its enhanced processing power. The device utilizes a state-of-the-art multi-core processor architecture, enabling it to handle large datasets and complex calculations with ease. This increased processing capability allows for real-time data analysis, ensuring that users can make informed decisions promptly.

The SSE-2 also boasts advanced connectivity options. Equipped with multiple communication interfaces, including Ethernet, Wi-Fi, and Bluetooth, it ensures seamless integration with existing systems and facilitates quick sharing of information across various platforms. This flexibility is essential for businesses that rely on a diverse array of tools and technologies.

Another significant characteristic of the Sterling SSE-2 is its user-friendly interface. Designed with the end-user in mind, the interface is intuitive and easy to navigate, allowing users of all skill levels to access the features they need without extensive training. This focus on usability is vital in a fast-paced environment where efficiency and productivity are paramount.

In terms of technology, the SSE-2 incorporates robust security features that safeguard sensitive data and transactions. From encryption protocols to authentication measures, the device is equipped to protect against a variety of cyber threats. This is increasingly important in an age where data breaches and security vulnerabilities can have devastating impacts on businesses.

The modular design of the Sterling SSE-2 also enhances its adaptability. Users can easily customize the system with additional modules and upgrades, enabling it to evolve alongside their needs. This forward-thinking design approach ensures longevity and relevance in an ever-changing technological landscape.

The Sterling SSE-2 stands out not just for its features, but also for its efficiency. It is designed to minimize energy consumption while maximizing performance, aligning with the global push towards sustainability in technology.

In summary, the Sterling SSE-2 is a powerful, flexible, and secure solution that meets the demands of today's data-driven businesses. Its combination of processing power, connectivity, user-friendliness, security, and modular design makes it a standout choice for organizations looking to thrive in a competitive environment.
Top Page Image Contents