JVC GR-DVL365 12 EN, Loading/Unloading a Cassette, Approximate recording time Tape Recording mode

Page 12

12 EN

GETTING STARTED (cont.)

Erase protection tab*

Make sure the window side is facing out.

Cassette holder

OPEN/EJECT

Switch

Cassette holder cover

PUSH HERE

* To Protect Valuable Recordings . . .

.... slide the erase protection tab on the back of the

tape in the direction of “SAVE”. This prevents the tape from being recorded over. To record on this tape, slide the tab back to “REC” before loading it.

Be sure to press only the section labeled “PUSH HERE” to close the cassette holder; touching other parts may cause your finger to get caught in the cassette holder, resulting in injury or product damage.

Loading/Unloading A Cassette

The camcorder needs to be powered up to load or eject a cassette.

1 Slide and hold OPEN/EJECT in the direction of the arrow then pull the cassette holder cover open until it locks. The cassette holder opens automatically.

• Do not touch internal components.

2 Insert or remove a tape and press “PUSH HERE” to close the cassette holder.

Once the cassette holder is closed, it recedes automatically. Wait until it recedes completely before closing the cassette holder cover.

When the battery’s charge is low, you may not be able to close the cassette holder cover. Do not apply force. Replace the battery with a fully charged one before continuing.

3 Close the cassette holder cover firmly until it locks into place.

Approximate recording time

Tape

Recording mode

 

 

SP

LP

 

 

 

 

30 min.

30 min.

45 min.

 

 

 

60 min.

60 min.

90 min.

 

 

 

80 min.

80 min.

120 min.

 

 

 

NOTES:

It takes a few seconds for the cassette holder to open. Do not apply force.

If you wait a few seconds and the cassette holder does not open, close the cassette holder cover and try again. If the cassette holder still does not open, turn the camcorder off then on again.

If the tape does not load properly, open the cassette holder cover fully and remove the cassette. A few minutes later, insert it again.

When the camcorder is suddenly moved from a cold place to a warm environment, wait a short time before opening the cassette holder cover.

Closing the cassette holder cover before the cassette holder comes out may cause damage to the camcorder.

Even when the camcorder is switched off, a cassette can be loaded or unloaded. After the cassette holder is closed with the camcorder switched off, however, it may not recede. It is recommended to turn the power on before loading or unloading.

When resuming recording, once you open the cassette holder cover a blank portion will be recorded on the tape or a previously recorded scene will be erased (recorded over) regardless of whether the cassette holder came out or not. See page 20 for information about recording from the middle of a tape.

Loosen the Grip Strap if it appears to interfere with the cassette holder cover operation ( pg. 10).

Image 12
Contents GR-DVL767 GR-DVL367 GR-DVL365 GR-DVL160 Dear Customer It is recommended that youBlue to N Neutral or Black Brown to L Live or Red Some DO’S and DON’TS on the Safe USE of Equipment Above ALLBefore recording an important scene How To Attach The Lens Cap How To Attach The Core Filter While pressing downGetting Started Power Charging the Battery PackBattery pack Charging time To Detach The Battery PackUsing the Battery Pack Using AC PowerApproximate recording time GR-DVL367/DVL365/DVL160 Approximate recording time GR-DVL767Grip Adjustment Viewfinder Adjustment10 EN Shoulder Strap AttachmentDate/Time Settings Set the Power Switch toApproximate recording time Tape Recording mode 12 ENLoading/Unloading a Cassette Recording Mode Setting Set the tape recording mode depending on your preferenceSP mode Audio Dubbing  pg and Insert EditingPicture Quality/Image Size Setting Loading a Memory CardTo Unload a Memory Card Press the MENU/BRIGHT wheel in. The Menu Screen appearsTape Recording To Adjust The Brightness Of The Display 16 ENBasic Recording Remove the lens capOperation Mode Power Switch PositionVIDEO/MEMORY Switch Position GR-DVL767/DVL367/DVL365 only Journalistic ShootingSlide the Power Zoom Lever towards T 18 ENZoom Zoom OutTo brighten the scene when natural lighting is too dim Set Light OFF/AUTO/ON as required OFF Turns off the lightWhen a blank portion is recorded on a tape 20 ENTime Code Proper recordingTo Control The Speaker Volume Normal Playback22 EN ConnectionsCamcorder If using a VCR . . . go to step If not . . . go to step Date/Time Set DATE/TIME to AUTO, on or OFF Menu Screen  pgTo cancel Blank Search midway 24 ENBlank Search PressMemory Card Recording Playback 26 EN Basic Shooting SnapshotTo Protect Valuable Files available only for SD Memory Card To Delete Unwanted Still ImagesTo Remove The Shutter Sound Approximate Number of Storable Images GR-DVL367/DVL36528 EN Auto PlaybackType of file played back last time is played If you are viewing an Image fileIndex Playback Viewing File InformationRemoving On-Screen Display 30 EN Protecting FilesTo Remove Protection Stored file is displayedMENU/BRIGHT Wheel Power Switch Lock Button Deleting FilesSelect Button Display Menu Screen Delete Screen32 EN Dubbing Still Images Recorded On a Tape To a Memory CardLock Button Display Menu Screen Play/Pause Button 4/6 Stop Button MENU/BRIGHT WheelTo cancel E-Mail Clip Recording To Make Video Clips from REAL-TIME Camera ImageTo Make Video Clips from Recorded Video Footage To view video clips stored on a memory cardTo Reset The Setting 34 ENTo Print ALL Still Images ONE Print for Each Dpof ScreenTo Reset The No. Of Prints To Print by Selecting Still ImagesNO. of Prints 36 EN Making a New FolderInitialising a Memory Card Folder and File namesAdvanced Features To Deactivate The Selected Mode 38 ENNight-Scope To Deactivate Night-ScopeShutter SnowSpotlight TwilightPower Switch to 40 ENFade/Wipe Effects To Deactivate The Selected EffectFader And Wipe Menu Snapshot Mode Selection 42 ENSnapshot For Tape Recording Snapshot RecordingWhile focusing on a nearer subject To obtain correct focusFocus detection zone Subject44 EN Exposure ControlIris Lock White Balance Adjustment Manual White Balance OperationCloud Halogen46 EN For Recording MenuWIPE/FADER Program AEMenu Screen Explanations Manual System Tele OFF MacroWide OFF CinemaCAM Cancel Reset ExecuteSystem Display Demo OFF Side LED50 EN For Playback MenuSound Mode Playback SoundDisplay 52 EN Dubbing To a VCRVCR To use this camcorder as a player Want to begin recordingTo DV Lock Button Core filter DV cable optionalInstalling The Batteries 54 ENWith the camcorder’s Power Switch Switch set to the camera Set to Play56 EN To allow frame-by-frame search during tape playbackTo allow you to add creative effects to the playback image Select MenuLeft Button Right Button Stop Normal playback To move image, pressPress T 58 EN SET REMOTE/VCR CodeVCR Recording deck Connect the editing cable to the Remote Pause connector Connect the editing cable to the R.A.EDIT ConnectorMake Connections Also refer to pg60 EN Select ScenesRandom Assemble Editing Menu appears Editing MenuAutomatic Editing to VCR Pause Edit ON/OFFAdjustment of VCR/CAMCORDER Timing 62 ENFor More Accurate Editing Diagnosing VCR/CAMCORDER TimingSet 12BIT Mode to Sound 2 or MIX Menu Screen  pg Audio DubbingTo hear the dubbed sound during playback DUB64 EN Insert EditingUsing USB or PC connection cable Using DV cableFor GR-DVL767/DVL367/DVL365 Owners 66 EN About Batteries Cold, charging may be incompleteBenefits Of Lithium-Ion Batteries 68 EN SET DATE/TIME! appears Date/time is not setOr OFF To Video There is no pictureFind a white subject and compose 10X optical zoom is selected Set Zoom to 40X or 500XTo Memory Video  pg70 EN Or set the Power Switch to OFF IndicatorsIs hot Let the unit cool downTurn the speaker volume down 72 ENSet the VIDEO/MEMORY Indication remains even though You repeat the above two or threeTimes, please consult your nearest JVC dealerCleaning The Camcorder 74 ENAfter Use To prevent damage and prolong service life Use only the following batteries AAA R03 size xTo avoid hazards During use76 EN About moisture condensation Serious malfunctioning78 EN Power requirement Storage mediaCompression system File sizeIndex Controls, Connectors And Indicators 80 ENOPEN/EJECT Switch  pg Power SwitchVideo Light Switch  pg PC Connector  pg82 EN Index Indications1024 Appears when the Power Switch is set to # @Volume 84 ENLCD Monitor/Viewfinder Indications During Tape Playback 116 21Appears when the date/time is not set  pg Indications86 EN Backlight Compensation  pg , 9Channels Left/Right Darken The LCD MonitorUnload a Tape White BalanceSee previous page as well

GR-DVL160, GR-DVL767, GR-DVL367, DVL367, GR-DVL365 specifications

The JVC GR-DVL365, DVL367, GR-DVL367, GR-DVL767, and GR-DVL160 represent a series of high-quality camcorders that cater to videography enthusiasts and casual users alike. With their compact designs and user-friendly features, these models have garnered attention for their exceptional performance and versatility.

One of the standout features across these models is the incorporation of the MiniDV format, which offers superior video quality with high resolution and low compression. This ensures that users can capture videos that are sharp and vibrant, making them perfect for everything from family events to professional projects.

The GR-DVL365 and GR-DVL367, in particular, are equipped with a powerful 800,000-pixel sensor that delivers clear images and videos even in moderate lighting conditions. The GR-DVL767 ups the ante with a 1.5-megapixel CCD sensor, allowing for even finer detail in recordings. These sensors contribute to the overall image quality, making these camcorders suitable for capturing memorable moments in stunning clarity.

Another impressive feature is the 10x optical zoom lens found in many of these models. This allows users to get close to their subjects without sacrificing image quality, a crucial element when filming events where space may be limited. The GR-DVL767 goes even further with a 20x optical zoom, enabling users to capture distant subjects with ease.

The user interface of these camcorders is designed to be intuitive. Most models feature a color LCD screen that not only provides a clear view of the subject but also allows users to navigate the various settings and options effortlessly. Additionally, the built-in image stabilization technology helps reduce the effects of handheld camera shake, resulting in smoother videos.

For those interested in editing their footage, the ability to output video through IEEE 1394 (FireWire) is a significant advantage. This makes transferring video to a computer for editing straightforward and efficient, enhancing the overall filmmaking experience.

Moreover, the GR-DVL365 and GR-DVL367 come equipped with several shooting modes, including night mode and digital effects, allowing users more creativity in their filming. The GR-DVL160, while simpler, still offers essential features that make it a reliable option for everyday use.

In summary, the JVC GR-DVL series of camcorders boasts an impressive array of features, including advanced sensors, optical zoom capabilities, user-friendly interfaces, and solid video output options. Whether you're a budding filmmaker or simply looking to document your life, these camcorders deliver a remarkable blend of performance and ease of use.