JVC GR-DVL367, GR-DVL160, GR-DVL365, GR-DVL767 Using USB or PC connection cable, Using DV cable

Page 65

SYSTEM

CONNECTIONS

 

EN 65

[A] Using USB or PC connection cable

 

 

 

 

GR-DVL160 only

 

 

 

PC connection cable

To RS-232C

 

To PC

(optional)

 

 

 

To USB

USB cable

To USB

 

 

(provided)

connector

 

 

 

PC

[B] Using DV cable

GR-DVL767/DVL367/DVL365 only

 

 

 

 

OR

 

 

Power Switch

 

 

 

Core filter

Core filter

 

To DV

DV cable (optional)

To DV

 

 

 

connector

 

 

 

PC with DV

 

 

 

connector

VIDEO/MEMORY

 

 

Switch (GR-DVL767/DVL367/DVL365 only;

 

 

open the LCD monitor to access this switch.)

 

Connection To A Personal Computer

[A] Using USB or PC connection cable

This camcorder can transfer still images to a PC by using the software (GR-DVL767/DVL367/DVL365: provided, GR-DVL160: optional software HS- V16KITE).

[B] Using DV cable

It is also possible to transfer still images to a PC with a DV connector by using software equipped with the PC or commercially available software.

1 Make sure the camcorder and PC are turned off.

2 Connect the camcorder to your PC using the appropriate cable as shown in the illustration.

3 For GR-DVL767/DVL367/DVL365 Owners:

If you are using the USB connection, set the VIDEO/ MEMORY switch to “MEMORY”.

4 Turn the camcorder’s Power Switch to “PLAY” while pressing down the Lock Button located on the switch and turn on the PC.

•Refer to the instruction manual of the software on how to transfer a still image to the PC.

5 When finished, turn off the PC first, then the camcorder.

NOTES:

●Refer to “SOFTWARE INSTALLATION AND USB (or PC) CONNECTION GUIDE” for the installation of the bundled software and drivers.

●It is recommended to use the AC Adapter as the power supply instead of the battery pack ( pg. 9).

●Never connect the USB or PC connection cable and the DV cable simultaneously to the camcorder. Connect only the cable you wish to use to the camcorder.

●If the PC connected to the camcorder via the USB cable is not powered, the camcorder does not enter the USB mode.

●The date/time information cannot be captured into the PC.

●Refer to the instruction manuals of the PC and Software.

●The still images can also be transferred to a PC with a DV connector-equipped capture board.

●When using a DV cable, be sure to use the optional JVC VC-VDV206U or VC-VDV204U DV cable depending on the type of DV connector (4 or 6 pins) on the PC, or use the DV cable provided with the capture board.

●The system may not work properly depending on the PC or capture board you are using.

For GR-DVL767/DVL367/DVL365 Owners: “ACCESSING FILES” appears on the LCD monitor while the PC is accessing data in the camcorder or the camcorder is transferring a file to the PC.

NEVER disconnect the USB cable while “AC- CESSING FILES” is displayed on the LCD monitor since this can result in product damage.

Page 64 Page 66
Image 65
Page 64 Page 66
Contents
GR-DVL767 GR-DVL367 GR-DVL365 GR-DVL160 Blue to N Neutral or Black Brown to L Live or Red Dear CustomerIt is recommended that you Above ALL Some DO’S and DON’TS on the Safe USE of EquipmentBefore recording an important scene How To Attach The Lens Cap While pressing down How To Attach The Core FilterGetting Started Charging the Battery Pack PowerBattery pack Charging time To Detach The Battery PackUsing AC Power Using the Battery PackApproximate recording time GR-DVL367/DVL365/DVL160 Approximate recording time GR-DVL767Viewfinder Adjustment Grip Adjustment10 EN Shoulder Strap AttachmentSet the Power Switch to Date/Time SettingsLoading/Unloading a Cassette Approximate recording time Tape Recording mode12 EN Set the tape recording mode depending on your preference Recording Mode SettingSP mode Audio Dubbing  pg and Insert EditingLoading a Memory Card Picture Quality/Image Size SettingTo Unload a Memory Card Press the MENU/BRIGHT wheel in. The Menu Screen appearsTape Recording 16 EN To Adjust The Brightness Of The DisplayBasic Recording Remove the lens capPower Switch Position Operation ModeVIDEO/MEMORY Switch Position GR-DVL767/DVL367/DVL365 only Journalistic Shooting18 EN Slide the Power Zoom Lever towards TZoom Zoom OutSet Light OFF/AUTO/ON as required OFF Turns off the light To brighten the scene when natural lighting is too dim20 EN When a blank portion is recorded on a tapeTime Code Proper recordingNormal Playback To Control The Speaker VolumeCamcorder 22 ENConnections Date/Time Set DATE/TIME to AUTO, on or OFF Menu Screen  pg If using a VCR . . . go to step If not . . . go to step24 EN To cancel Blank Search midwayBlank Search PressMemory Card Recording Playback Basic Shooting Snapshot 26 ENTo Delete Unwanted Still Images To Protect Valuable Files available only for SD Memory CardTo Remove The Shutter Sound Approximate Number of Storable Images GR-DVL367/DVL365Auto Playback 28 ENType of file played back last time is played If you are viewing an Image fileRemoving On-Screen Display Index PlaybackViewing File Information Protecting Files 30 ENTo Remove Protection Stored file is displayedDeleting Files MENU/BRIGHT Wheel Power Switch Lock ButtonSelect Button Display Menu Screen Delete ScreenDubbing Still Images Recorded On a Tape To a Memory Card 32 ENLock Button Display Menu Screen Play/Pause Button 4/6 Stop Button MENU/BRIGHT WheelTo Make Video Clips from REAL-TIME Camera Image To cancel E-Mail Clip RecordingTo Make Video Clips from Recorded Video Footage To view video clips stored on a memory card34 EN To Reset The SettingTo Print ALL Still Images ONE Print for Each Dpof ScreenNO. of Prints To Reset The No. Of PrintsTo Print by Selecting Still Images Making a New Folder 36 ENInitialising a Memory Card Folder and File namesAdvanced Features 38 EN To Deactivate The Selected ModeNight-Scope To Deactivate Night-ScopeSnow ShutterSpotlight Twilight40 EN Power Switch toFade/Wipe Effects To Deactivate The Selected EffectFader And Wipe Menu 42 EN Snapshot Mode SelectionSnapshot For Tape Recording Snapshot RecordingTo obtain correct focus While focusing on a nearer subjectFocus detection zone SubjectIris Lock 44 ENExposure Control Manual White Balance Operation White Balance AdjustmentCloud HalogenFor Recording Menu 46 ENWIPE/FADER Program AEMenu Screen Explanations Macro Manual System Tele OFFWide OFF CinemaReset Execute CAM CancelSystem Display Demo OFF Side LEDFor Playback Menu 50 ENDisplay Sound ModePlayback Sound VCR 52 ENDubbing To a VCR Want to begin recording To use this camcorder as a playerTo DV Lock Button Core filter DV cable optional54 EN Installing The BatteriesSwitch set to the camera Set to Play With the camcorder’s Power SwitchTo allow frame-by-frame search during tape playback 56 ENTo allow you to add creative effects to the playback image Select MenuPress T Left ButtonRight Button Stop Normal playback To move image, press VCR Recording deck 58 ENSET REMOTE/VCR Code Connect the editing cable to the R.A.EDIT Connector Connect the editing cable to the Remote Pause connectorMake Connections Also refer to pgSelect Scenes 60 ENRandom Assemble Editing Menu appears Editing Menu Pause Edit ON/OFF Automatic Editing to VCR62 EN Adjustment of VCR/CAMCORDER TimingFor More Accurate Editing Diagnosing VCR/CAMCORDER TimingAudio Dubbing Set 12BIT Mode to Sound 2 or MIX Menu Screen  pgTo hear the dubbed sound during playback DUBInsert Editing 64 ENFor GR-DVL767/DVL367/DVL365 Owners Using USB or PC connection cableUsing DV cable 66 EN Benefits Of Lithium-Ion Batteries About BatteriesCold, charging may be incomplete SET DATE/TIME! appears Date/time is not set 68 ENOr OFF To Video There is no picture10X optical zoom is selected Set Zoom to 40X or 500X Find a white subject and composeTo Memory Video  pg70 EN Indicators Or set the Power Switch to OFFIs hot Let the unit cool downSet the VIDEO/MEMORY Turn the speaker volume down72 EN You repeat the above two or three Indication remains even thoughTimes, please consult your nearest JVC dealerAfter Use Cleaning The Camcorder74 EN Use only the following batteries AAA R03 size x To prevent damage and prolong service lifeTo avoid hazards During use76 EN Serious malfunctioning About moisture condensation78 EN Storage media Power requirementCompression system File size80 EN Index Controls, Connectors And IndicatorsPower Switch OPEN/EJECT Switch  pgVideo Light Switch  pg PC Connector  pg1024 82 ENIndex Indications # @ Appears when the Power Switch is set to84 EN VolumeLCD Monitor/Viewfinder Indications During Tape Playback 116 21Indications Appears when the date/time is not set  pg86 EN  pg , 9 Backlight CompensationChannels Left/Right Darken The LCD MonitorSee previous page as well Unload a TapeWhite Balance
Top Page Image Contents