JVC TK-C1431 manual Video Adjust Screen

MENU SETTING

ALC SETTINGS Screen (Continued)

	Item		Functions and set values	Initial value
B&W COLOUR		This function sets the colour modes to colour or B&W.
MODE ..		When switching the mode between “colour’’ and “B&W”
		is carried out, the focus may be dislocated. In such a case
		adjust the focus again.
	B&W	Switches the mode from colour to B&W and visa-versa.		AUX
		OFF	: Turns the B&W mode switching function off.
		ON	: Sets the camera permanently to B&W mode.
		AUTO	: The camera automatically switches to Colour
			mode when the object is bright and B&W mode
			when it is dark. ( Page 40)
		AUX	: B&W/COLOUR switching is carried out
			according to the signal input from the AUX
			terminal. ( Page 41)
		MEMO
		• If AUTO is selected as the B&W item, the B&W/COLOUR
		setting can be switched as appropriate according to the
		brightness of the object, but illumination and screen
		conditions may make this impossible. Moreover, when
		you use infrared illumination, if the subject excessively
		reflects, a B/W screen can switch to a colour screen. To
		make absolutely certain of B&W/COLOUR switching,
		set to AUX and input the control signal to the AUX
		terminal.
		• If AUX is selected as the B&W item, the AUX TERMINAL
		item is automatically set to B&W IN. If this changes to
		anything other than AUX, the AUX TERMINAL item
		reverts to the value set before the change was made.
		( Page 33.)
	AUTO	When the “B&W” function is set to “AUTO”, this function		NORMAL
	LEVEL	sets the signal level of the object at which the camera will
		automatically switch to B&W mode.
		LOW	: Switches to B&W mode when the signal level of
			the object indicates low illumination.
		NORMAL: Switches to B&W mode when the signal level of
			the object indicates medium illumination.
		HIGH	: Switches to B&W mode when the signal level of
			the object indicates high illumination.
		MEMO
		When the item “B&W” is set to other than AUTO, “- - -” is
		displayed and the settings to the item “LEVEL” cannot be
		varied.

VIDEO ADJUST Screen

Adjustments are made on video signals.

Item		Functions and set values	Initial value
WHITE	Selects the white balance adjustment function. The white		ATW
BALANCE	balance can be adjusted manually or automatically for
	light within the colour temperature range of 2500K to
	8000K.
	• ATW:	Auto-Tracking White Balance mode.
		This automatically adjusts the white balance.
	• AWC:	Auto White Balance Controll mode. When the
		SET button is pressed, the adjustment
		screen appears.
	MEMO	( See page 37.)
	The “- - -” will appear during operation in the black-and-
	white mode and any setting cannot be changed.
COLOUR	To adjust the colour level of the video signal.		NORMAL
LEVEL	• To make colours lighter … Decrease the value
	• To make colours darker … Increase the value
	[Set values: –5 to NORMAL to 5]
	MEMO
	The “- - -” will appear during operation in the black-and-
	white mode and any setting cannot be changed.
ENHANCE	To adjust the contour enhancing level of the video signal.		NORMAL
LEVEL	• To make the picture quality harder … Increase the value
	• To make the picture quality softer … Decrease the value
	[Set values: –5 to NORMAL to 5]
PEDESTAL	To adjust the pedestal level of the video signal.		NORMAL
LEVEL	• To brighten picture … Increase the value
	• To darken picture … Decrease the value
	[Set values: –5 to NORMAL to 5]
AUTO	This is set when it is difficult to view a dark part of the		OFF
BLACK	image even if gain is boosted by the AGC (automatic gain
CTL	control).
	ON: When a black level of the image signal is low, a
	pedestal level that becomes the standard of black
	is automatically elevated, making it easier to view a
	dark part.
	OFF: AUTO BLACK does not function.
	MEMO
	• When PEDESTAL LEVEL is set to 5, no function can
	take place even if AUTO BLACK CTL is ON.
	• When AGC MODE is set to OFF, no function can take
	place even if AUTO BLACK CTL is ON.

E-30 E-31