Introduction, Features, Contents

INTRODUCTION

Thank you for purchasing this product.

(These instrustions are for TK-WD310U and TK-WD310E.)

Before beginning to operate this unit, please read the instruction manual carefully in order to make sure that the best possible per- formance is obtained.

Features

Backlight compensation over a wide area is realized by the 14-bit Wide Dynamic Range feature.

The Wide Dynamic Range feature controls the exposure time using a maximum of 5 sampling timing for the image within a single screen. Even when shooting in areas with large difference in lightning, sub- jects with difference in brightness can be viewed in a clear and natu- ral state.

1/3-inch high-resolution DPS device adopted as shooting element to realize high picture quality with no smearing or blooming in areas with high luminance. In addition, 1.9lx (during F1.2, 50%, AGC HIGH setting) is realized for minimum subject brightness.

Horizontal resolution of 480 lines (typ.) and vertical resolution of over 400 lines allow display of finely detailed video.

New device adopted for use even under strong electric field condi- tions.

Compatible with CS mount and VIDEO auto iris/DC auto iris. * When using the C mount lens, C mount adapter is required.

Various settings in each menu screen are possible.

Menu settings can be performed easily using single button opera- tions.

3 white balance modes of ATW, AWB and MANUAL are available. ATW mode that adjusts the white balance automatically according to the changes in lighting conditions (color temperature) or AWB/ MANUAL mode that automatically or manually adjusts and locks the white balance of specific lighting conditions can be selected.

Camera title setting and display can be made.

Compact design allows installation in narrow spaces.

EASY INSTALLATION

The factory default settings are intended to give easy installation. Please attach a lens, a power supply, a video cable and mount the camera securely. You should now have good images.

The additional information contained in this handbook is intended to give additional flexibility to more demanding installations.

Before starting an important recording, be sure to perform a test recording in order to confirm that a normal recording is possible.

We do not accept liability for the loss of a recording in the case of it becoming impossible to record due to a problem in the video camera, VCR or video tape.

We do not accept liability for any damage to the camera in cases when it is dropped because of incomplete installation due to not observing the installation instructions correctly. Please be careful when installing the camera.

Characters and symbols used in this instruction manual.

CAUTION : Cautionary notes concerning operation of the unit.

MEMO	: Reference such as restrictions of features, etc.

: Reference page or item.

Contents
INTRODUCTION
Features	2
Contents	4
Operating Precautions	5
Names and Operations of Parts	8
CONNECTION/INSTALLATION
Basic System	13
Mounting the lens	14
Connections on the back	16
Mounting the camera	18
Auto iris lens adjustment	20
Back focus adjustment	22
MENU SETTING
Menu settings	24
Menu tree	26
About menus	27
FOCUS ADJUST screen	27
VIDEO ADJUST screen	28
WDR CUSTOM SETTINGS screen	29
MANUAL WHITE BALANCE screen	34
CAMERA SETTINGS screen	35
LENS ADJUST screen	35
CAMERA TITLE EDIT screen	37
FACTORY SETTINGS screen	39
OTHERS
Troubleshooting	40
Specifications	41

INTRODUCTION

Operating Precautions

●To save energy, when it is not being used turn the system’s power off.

●This camera has been designed for indoor use.

When you use it outdoors, be sure to use an appropriate housing.

●Do not install or use the camera in the following places.

•In a place exposed to rain or moisture.

•In a place with vapor or oil soot, for example in a kitchen.

•When the ambient temperature rises above or falls below the ac- ceptable range (from –10°C to 50°C).

•Near a source of radiation, X-rays, strong radio waves or magne- tism.

•In a place where corrosive gasses are generated.

•In a place subject to vibration.

•In a place with excessive dirt.

●If this camera and the cables connected to this camera are used where there are strong electromagnetic waves or where there is magnetism present, for example near a radio or TV transmitter, power transformer or an electric motor, the picture may produce noise and the colours may be affected.

●This camera incorporates an AGC circuit. As a result, when it is used under low light conditions, the camera sensitivity is automati- cally boosted and the picture may look uneven. However, this is not a malfunction.

●When this camera is used in the ATW mode, the recorded colours may be slightly different from the actual colours due to the opera- tional principles of the auto-tracking white balance circuit. However, this is not a malfunction.

●Hunting may occur depending on the used lens. However, this is not a malfunction of the unit.

●The screen surroundings may appear dark depending on the used lens.