JVC LYT0143-001A Initializing the Storage Media, Protect Delete Copy Format EX I T, Preparation

Page 45

EN45

Initializing the Storage Media

Since the camera is a microcomputer-controlled device, external noise and interference (from a TV, a radio, etc.) might prevent it from functioning properly. For example, when a still image you shot is stored in memory, the above may cause the following: Although the remaining number of shots indicator shows that shooting is possible, a still image cannot be stored in memory after shooting.

In such a case, initialize the memory by following steps 1 through 4 below. Please note that initialization deletes all the still images (including ones for which you performed the “Protect” function) stored in memory. If you wish to keep any of the still images that are stored in memory, before initialization first transfer them to a PC and save them. If image data is corrupt, transfer is impossible. Normally, it is not necessary to initialize a Compact Flash card. However, if a malfunction occurs (for example, if the image you shot cannot be played back), then initialize the Compact Flash card.

NOTE:

Switch the camera off with the Power Dial before installing a Compact Flash card.

Preparation

Insert the Compact Flash card to be initialized.

Turn the Power Dial, while pressing its Lock

1 Button, to “

PLAY

” and push the MENU Jog

 

 

Dial.

•The PLAY MENU Screen appears.

PLAY MENU Screen

PLAY MENU PLAY MODE F I LE

COMM . MODE EX I T

FI LE

PROTECT

DELETE

COPY

FORMAT

EX I T

Power Dial

OFFY

A

L

P

Lock Button

MENU Jog Dial

FILE Screen

2 Rotate the MENU Jog Dial to select “FILE” and push it.

•The FILE Screen appears.

3 Rotate the MENU Jog Dial to select “FORMAT” and push it.

4 Rotate the MENU Jog Dial to select “EXECUTE” and push it.

•The message “FORMATTING IN PROGRESS” is displayed and formatting starts.

•When “NO IMAGES STORED” is displayed, formatting is complete.

CAUTION

Do not perform any other operation (such as

turning off the camera) during initialization,

as this may cause the camera's built-in

memory to be corrupted. Also, be sure to use

 

 

FORMAT

 

 

 

EXECUTE

FORMAT Screen

 

 

EX I T

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

NOTES:

the optional AC power adapter, as the

camera’s built-in memory or the Compact

Flash card may be corrupted if the batteries

become exhausted during initialization.

If the built-in memory is initialized, the preset

frames (pg. 40) will be lost. If this occurs,

consult your nearest JVC dealer. It is still

possible to shoot and play back images

without the preset frames.

After initializing, all images stored in the compact flash card, including those which have been protected, are cleared. Be sure to transfer important images to a PC before proceeding with initialization. However, if image data is corrupt, it cannot be transferred to a PC.

Initializing a Compact Flash card does not clear images stored in the camera’s built-in memory.

If the message “PLEASE INITIALIZE” appears, the built-in memory needs to be initialized. Without inserting a Compact Flash card, perform steps 1 through 4.

When a Compact Flash card is not installed, “FORMAT” normally cannot be selected. If it can be selected, then the built-in memory is malfunctioning. When this occurs, make a back-up of the stored image data before initializing.

Image 45
Contents GC-S1 Dear Customer Important For Customers in U.KIt is recommended that you This unit is produced to comply with Standard IEC Publ Some DO’S and DON’TS on the Safe USE of EquipmentLoad batteries. pg Turn the power on. pgPlay an image. pg Shoot an image. pg10X Zooming for Magnifying Faraway Subjects Major Features ENContents LR6 AA-size Alkaline battery xVideo cable Soft caseLoading Batteries Hand Strap AttachmentUnloading Batteries Household Power Supply Connect the Power Cord to the AC Power AdapterMake sure connections are secure Getting Started Date/Time SettingSet the values for the date EX I T Date / T I MESet the values for the time Rotate the Menu Jog Dial to select Exit and push it 3 times12EN Lens Adjustment Shutter Release ButtonTo darken the image Brightness ControlRotate the Bright dial upward To brighten the imageFull Auto mode Shooting Mode SelectionManual mode Self-Timer modePictrue Mode Selection Cture Mode SystemSTD Economy EX I T Camera turns on in the Full Auto mode Shutter Release Button Power Dial Lock ButtonSimple Shooting Full Auto Shooting Train the lens on the subject to be photo- graphedDisplay Button Standard View with Information Display mode Camera Setup CheckZoom Shooting Wide-angle zoomingRelatively wide area can be photographed Self-Timer Shooting Self-Timer LampBlinks Lock Button Flash Adjustment Flash ShootingTo take another shot with a flash To adjust a previously set exposure value Exposure ControlExposure EX I T M.W.B. Setup Screen appears Adjusting the White BalanceWhite Balance Control AutoPage Shutter Speeds Selection Menu Jog Dial Power Dial Look ButtonShutter Speed Selecting the Shutter SpeedShutter Speed Effect Shutter Speeds and EffectsHard-to-shoot subjects in low light Shutter speed is not affected by subtle hand movementsTo focus on a farther subject Manual FocusingTo focus on a nearer subject Minimum subject distanceStandard View mode View Mode SelectionQuick View mode Display ButtonPower Save Mode Power Save OFF EX I TTo deactivate the Power Save mode Camera Menu Cture Mode System Flash AdjustmentFlash ADJ Date / T I ME Flash ADJ EX I TPlayback Through a TV Monitor or VCR PlaybackWhen there is more than one image in memory Zoom Button Power DialNormal Playback Auto PlaybackIndex Screen Index Playback Play Mode Ndex Effect Frame Mult EX I TPlayback Protecting ImagesCopy Format EX I T Press Shutter After Select Screen returns to the normal playback screenTo remove protection File Screen Deleting ImagesFile Screen appears Rotate the Menu Jog Dial to select Delete and push itDelete Execute EX I T DeleteTo select an image by browsing images stored in memory To delete all imagesTo cancel the effect Menu Jog Dial Power DialApplying Sepia/Black-and-White Effects SEP I a Zoom EX I TMagnifying the Playback Image Zoom Effect Setup ScreenEffect Black /WH ITE SEP I a Zoom EX I T Zoom-in effect magnifies a selected area of imageTypes of Frames Preset frames 9 typesFraming an Image Frame Setup ScreenRotate the Menu Jog Dial to select Frame and push it Rotate the Menu Jog Dial to select a frame and push itRotate the Menu Jog Dial to select Multi and push it Multi-Image ScreenTo Create a Multi-Image Screen Using Selected Images To Create a Multi-Image Screen Using the Same ImageTo cancel the selection of an image Mult SameInstalling a Compact Flash Card Compact Flash Card OperationRemoving a Compact Flash Card Initializing the Storage Media Protect Delete Copy Format EX I TPreparation Applied Operations Install the Compact Flash card in the cameraStoring Images in a Compact Flash Card Shoot imagesRotate the Menu Jog Dial to select Copy and push it Copy ScreenTo copy selected images only To copy all imagesALL Execute Selected EX I T EN Applied OperationTo Copy Selected Images Only Before doing the following, perform steps 1 through 5 onCopy Confirmation Screen To Copy All ImagesComm . Mode PC Mode Image Copy Using Infrared Communication IrTran-PRotate the Menu Jog Dial to select COMM. Mode and push it FLASH/TRANSFER Button Lock Button50 cm Reception is complete when this message disappearsPrinting on a Digital Printer IrDA Transfer Make multi-image screens, when processing imagesPress the FLASH/TRANSFER Button To abort image transfer in the middlePC Connection Operation COMM. Mode Setup ScreenPicture Navigator Software Provided Push the Menu Jog@ # % Infrared Beam Sensor Shutter Release ButtonTrain on the subject PC JackTripod Mounting Socket EN CONTROLS, Connectors and IndicatorsCF F I NE On-Screen Display During ShootingIcons Displayed During Manual Focusing ENCONTROLS, Connectors and IndicatorsPicture Quality Mode FINE/STD These icons are displayed when manual focusing is selectedWhen the Power Dial is set to playback screen Battery Power RemainingOn-Screen Display During Playback Total Number of ImagesDuring flash shooting, power turns off No power is suppliedIs the battery dead? When the built-in memory is full and no more 47-53AC power adapter and plug it in for over Frames are erased. Consult your nearest JVCDealer Appears when image reception is cancelled Appears when image transmission is cancelledAppears when data was not sent due to failure Appears when data was not received due to failureTo prevent fire, electric shock or injury To prevent fire, malfunction or electric shockTo avoid malfunction Avoid using the unit For safety, do notDo not leave the unit To protect the unit, do notTo prevent damage to the LCD monitor To prolong service lifeDo not Be aware of the following phenomena forMajor Specifications Index Camera setup checkPg , 57 Exposure compensationGC-S1

LYT0143-001A specifications

The JVC LYT0143-001A is a high-performance camera module that has gained recognition in various imaging applications. Its robust design and advanced features make it suitable for a variety of environments, ranging from professional filmmaking to industrial use.

One of the standout features of the JVC LYT0143-001A is its impressive resolution. The camera utilizes a high-sensitivity sensor that captures stunning 4K video, ensuring that every detail is vividly represented. This level of clarity is especially beneficial for applications requiring meticulous attention to detail, such as surveillance, monitoring, and professional video production.

In terms of connectivity, the JVC LYT0143-001A boasts multiple interfaces, including HDMI and USB options, which facilitate seamless integration with other devices. This versatility allows for easy connections to monitors and editing equipment, making it ideal for users who need to review or edit footage in real-time. Furthermore, the module supports various recording formats, giving users the flexibility to choose the best option for their specific project needs.

The camera's low-light performance is another critical aspect. Thanks to its advanced image processing technology, the LYT0143-001A can maintain high-quality imagery even in challenging lighting conditions. This feature is vital for nighttime filming or scenarios where lighting cannot be controlled.

Additionally, the LYT0143-001A includes features designed for ease of use. Its compact design allows for straightforward installation in tight spaces, while the lightweight construction makes it suitable for use in mobile applications or on drones. The intuitive user interface ensures that operators of all skill levels can navigate the settings without a steep learning curve.

For users concerned with durability, the JVC LYT0143-001A is built to withstand various environmental conditions. Its rugged design provides added protection against dust and moisture, which is crucial for outdoor applications.

In summary, the JVC LYT0143-001A is an exceptional camera module that combines high resolution, versatile connectivity, excellent low-light performance, and durable construction. Its features and technologies make it a top choice for professionals in need of reliable and high-quality imaging solutions across different settings. Whether for film production, surveillance, or creative projects, the JVC LYT0143-001A is a commendable asset in the field of imaging technology.