JVC LYT0143-001A manual No power is supplied, Message Memory Full appears, Is the battery dead?

Page 60

60ENTROUBLESHOOTING

As this digital still camera is controlled by a microcomputer, it may occasionally malfunction due to noise or interference. In such a case, remove the power supply (batteries or AC power adapter), push the Reset Switch (☞ pg. 56) and retry using the camera. If the trouble still persists and it cannot be solved by referring to the following table, please consult your nearest JVC dealer.

SYMPTOM

Power

No power is supplied.

Shooting

The LCD monitor flickers in the Standard View mode (colour display).

Shooting is impossible.

Images do not appear.

The menu screens are not available.

Although the Shutter Release Button is half-pressed, focusing is not possible.

Images become dark when sunlight is captured by the camera.

The LCD monitor is dark or whitish.

The message “MEMORY FULL” appears.

Images take on a strobe-like effect.

There is colour noise in the image.

During flash shooting, power turns off.

CORRECTIVE ACTION

 

PAGE

 

 

 

● Is the battery dead?

8

● Are the batteries loaded in the correct direction?

9

●Is the power supply connected properly?

●The battery power is low. Replace the batteries.

 

 

 

8

 

 

 

● Is the Power Dial set to “ PLAY ”?

 

14

● Switch off the camera, then on again.

14

 

 

 

 

 

● Is the Power Dial set to “

A

”?

14

 

 

 

 

 

 

 

 

 

● Is focusing set to manual adjustment?

 

 

● Are you shooting under low light or are you

26

shooting a subject which has no contrast?

 

 

● This is not a malfunction.

 

—

 

 

 

 

 

● Turn the lens to adjust the LCD monitor angle or

12

adjust the brightness.

 

 

●Is the image being played back in a cold place? In cold areas, the LCD monitor appears slightly dark. This is not a malfunction.

●The LCD monitor's lamp is reaching the end of its service life. Consult your nearest JVC dealer.

 

● When the built-in memory is full and no more

 

47–53

 

shooting is possible, this message appears. Use a

 

 

 

blank Compact Flash card or transfer the stored

36

 

images to a Windows® PC or Macintosh® and

 

 

 

save them. Then, delete the images from the

 

 

 

camera's built-in memory to make room for new

 

 

 

shots.

 

 

 

● This is not a malfunction.

 

—

 

● This is not a malfunction.

 

—

 

● During flash shooting, if the remaining battery

20

 

power is half-full or less, the power may turn off.

 

 

 

 

 

 

 

Page 59 Page 61
Image 60
Page 59 Page 61
Contents GC-S1 Dear Customer Important For Customers in U.KIt is recommended that you Some DO’S and DON’TS on the Safe USE of Equipment This unit is produced to comply with Standard IEC PublTurn the power on. pg Load batteries. pgPlay an image. pg Shoot an image. pgMajor Features EN 10X Zooming for Magnifying Faraway SubjectsContents Alkaline battery x LR6 AA-sizeVideo cable Soft caseLoading Batteries Hand Strap AttachmentUnloading Batteries Household Power Supply Connect the Power Cord to the AC Power AdapterMake sure connections are secure Date/Time Setting Getting StartedEX I T Date / T I ME Set the values for the dateSet the values for the time Rotate the Menu Jog Dial to select Exit and push it 3 timesLens Adjustment Shutter Release Button 12ENBrightness Control To darken the imageRotate the Bright dial upward To brighten the imageShooting Mode Selection Full Auto modeManual mode Self-Timer modePictrue Mode Selection Cture Mode SystemSTD Economy EX I T Shutter Release Button Power Dial Lock Button Camera turns on in the Full Auto modeSimple Shooting Full Auto Shooting Train the lens on the subject to be photo- graphedCamera Setup Check Display Button Standard View with Information Display modeZoom Shooting Wide-angle zoomingRelatively wide area can be photographed Self-Timer Shooting Self-Timer LampBlinks Lock Button Flash Adjustment Flash ShootingTo take another shot with a flash To adjust a previously set exposure value Exposure ControlExposure EX I T Adjusting the White Balance M.W.B. Setup Screen appearsWhite Balance Control AutoPage Menu Jog Dial Power Dial Look Button Shutter Speeds SelectionShutter Speed Selecting the Shutter SpeedShutter Speeds and Effects Shutter Speed EffectHard-to-shoot subjects in low light Shutter speed is not affected by subtle hand movementsManual Focusing To focus on a farther subjectTo focus on a nearer subject Minimum subject distanceView Mode Selection Standard View modeQuick View mode Display ButtonPower Save Mode Power Save OFF EX I TTo deactivate the Power Save mode Flash Adjustment Camera Menu Cture Mode SystemFlash ADJ Date / T I ME Flash ADJ EX I TPlayback Playback Through a TV Monitor or VCRZoom Button Power Dial When there is more than one image in memoryNormal Playback Auto PlaybackIndex Screen Play Mode Ndex Effect Frame Mult EX I T Index PlaybackPlayback Protecting ImagesCopy Format EX I T Press Shutter After Select Screen returns to the normal playback screenTo remove protection Deleting Images File ScreenFile Screen appears Rotate the Menu Jog Dial to select Delete and push itDelete Delete Execute EX I TTo select an image by browsing images stored in memory To delete all imagesMenu Jog Dial Power Dial To cancel the effectApplying Sepia/Black-and-White Effects SEP I a Zoom EX I TEffect Setup Screen Magnifying the Playback Image ZoomEffect Black /WH ITE SEP I a Zoom EX I T Zoom-in effect magnifies a selected area of imagePreset frames 9 types Types of FramesFrame Setup Screen Framing an ImageRotate the Menu Jog Dial to select Frame and push it Rotate the Menu Jog Dial to select a frame and push itMulti-Image Screen Rotate the Menu Jog Dial to select Multi and push itTo Create a Multi-Image Screen Using the Same Image To Create a Multi-Image Screen Using Selected ImagesTo cancel the selection of an image Mult SameInstalling a Compact Flash Card Compact Flash Card OperationRemoving a Compact Flash Card Initializing the Storage Media Protect Delete Copy Format EX I TPreparation Install the Compact Flash card in the camera Applied OperationsStoring Images in a Compact Flash Card Shoot imagesCopy Screen Rotate the Menu Jog Dial to select Copy and push itTo copy selected images only To copy all imagesEN Applied Operation ALL Execute Selected EX I TTo Copy Selected Images Only Before doing the following, perform steps 1 through 5 onTo Copy All Images Copy Confirmation ScreenImage Copy Using Infrared Communication IrTran-P Comm . Mode PC ModeRotate the Menu Jog Dial to select COMM. Mode and push it FLASH/TRANSFER Button Lock ButtonReception is complete when this message disappears 50 cmMake multi-image screens, when processing images Printing on a Digital Printer IrDA TransferPress the FLASH/TRANSFER Button To abort image transfer in the middleCOMM. Mode Setup Screen PC Connection OperationPicture Navigator Software Provided Push the Menu Jog@ # % Shutter Release Button Infrared Beam SensorTrain on the subject PC JackEN CONTROLS, Connectors and Indicators Tripod Mounting SocketOn-Screen Display During Shooting CF F I NEENCONTROLS, Connectors and Indicators Icons Displayed During Manual FocusingPicture Quality Mode FINE/STD These icons are displayed when manual focusing is selectedBattery Power Remaining When the Power Dial is set to playback screenOn-Screen Display During Playback Total Number of ImagesNo power is supplied During flash shooting, power turns offIs the battery dead? When the built-in memory is full and no more 47-53AC power adapter and plug it in for over Frames are erased. Consult your nearest JVCDealer Appears when image transmission is cancelled Appears when image reception is cancelledAppears when data was not sent due to failure Appears when data was not received due to failureTo prevent fire, electric shock or injury To prevent fire, malfunction or electric shockTo avoid malfunction For safety, do not Avoid using the unitDo not leave the unit To protect the unit, do notTo prolong service life To prevent damage to the LCD monitorDo not Be aware of the following phenomena forMajor Specifications Camera setup check IndexPg , 57 Exposure compensationGC-S1

LYT0143-001A specifications

The JVC LYT0143-001A is a high-performance camera module that has gained recognition in various imaging applications. Its robust design and advanced features make it suitable for a variety of environments, ranging from professional filmmaking to industrial use.

One of the standout features of the JVC LYT0143-001A is its impressive resolution. The camera utilizes a high-sensitivity sensor that captures stunning 4K video, ensuring that every detail is vividly represented. This level of clarity is especially beneficial for applications requiring meticulous attention to detail, such as surveillance, monitoring, and professional video production.

In terms of connectivity, the JVC LYT0143-001A boasts multiple interfaces, including HDMI and USB options, which facilitate seamless integration with other devices. This versatility allows for easy connections to monitors and editing equipment, making it ideal for users who need to review or edit footage in real-time. Furthermore, the module supports various recording formats, giving users the flexibility to choose the best option for their specific project needs.

The camera's low-light performance is another critical aspect. Thanks to its advanced image processing technology, the LYT0143-001A can maintain high-quality imagery even in challenging lighting conditions. This feature is vital for nighttime filming or scenarios where lighting cannot be controlled.

Additionally, the LYT0143-001A includes features designed for ease of use. Its compact design allows for straightforward installation in tight spaces, while the lightweight construction makes it suitable for use in mobile applications or on drones. The intuitive user interface ensures that operators of all skill levels can navigate the settings without a steep learning curve.

For users concerned with durability, the JVC LYT0143-001A is built to withstand various environmental conditions. Its rugged design provides added protection against dust and moisture, which is crucial for outdoor applications.

In summary, the JVC LYT0143-001A is an exceptional camera module that combines high resolution, versatile connectivity, excellent low-light performance, and durable construction. Its features and technologies make it a top choice for professionals in need of reliable and high-quality imaging solutions across different settings. Whether for film production, surveillance, or creative projects, the JVC LYT0143-001A is a commendable asset in the field of imaging technology.
Top Page Image Contents