JVC GR-D225 Connections To a TV Or VCR, If using a VCR, go to . If not, go to step, To AV To S

Connections To A TV Or VCR

These are some basic types of connections. When making the connections, refer also to your VCR and TV instruction manuals.

1 2 3 4

Cable Adapter*

“Y/C”/“CVBS” Video

Out Select Switch

To TV or VCR

1 Make sure all units are turned off.

2 Connect the camcorder to a TV or VCR as shown in the illustration.

If using a VCR, go to step 3. If not, go to step 4.

3 Connect the VCR output to the TV input, referring to your VCR’s instruction manual.

4

5 Set the VCR to its AUX input mode, and set the TV to its VIDEO mode.

To choose whether or not the following displays appear on the connected TV

●Date/Time

Set “DATE/TIME” to “AUTO”, “ON” or “OFF”. (
pg. 14, 17)

●Time Code

Set “TIME CODE” to “ON” or “OFF”. (
pg. 14, 17)

●Indications other than date/time and time code Set “ON SCREEN” to “OFF”, “LCD” or “LCD/TV”. (
pg. 14, 17)

NOTES:

●It is recommended to use the AC Adapter as the power supply instead of the battery pack. (
pg. 7)

●To monitor the picture and sound from the camcorder without inserting a tape, set the camcorder’s Power Switch to “A” or “M”, then set your TV to the appropriate input mode.

●Make sure you adjust the TV sound volume to its minimum level to avoid a sudden burst of sound when the camcorder is turned on.

●If you have a TV or speakers that are not specially shielded, do not place the speakers adjacent to the TV as interference will occur in the camcorder playback picture.

●When a cable is connected to the AV connector, the sound is not heard from the speaker.

VIDEO RECORDING & PLAYBACK