JVC GR-DVL915, GR-DVL510, GR-DVL515, GR-DVL310, GR-DVL715 12 EN, Loading/Unloading a Cassette

Page 12

12 EN

Erase protection tab*

Make sure the window side is facing out.

PUSH HERE

Cassette

 

holder

Cassette holder cover

OPEN/EJECT Switch

GETTING STARTED (cont.)

Loading/Unloading A Cassette

The camcorder needs to be powered up to load or eject a cassette.

1 Slide and hold OPEN/EJECT in the direction of the arrow then pull the cassette holder cover open until it locks. The cassette holder opens automatically.

•Do not touch internal components.

2 Insert or remove a tape and press “PUSH HERE” to close the cassette holder.

•Once the cassette holder is closed, it recedes automatically. Wait until it recedes completely before closing the cassette holder cover.

•When the battery’s charge is low, you may not be able to close the cassette holder cover. Do not apply force. Replace the battery with a fully charged one before continuing.

3 Close the cassette holder cover firmly until it locks into place.

*To Protect Valuable Recordings . . .

.... slide the erase protection tab on the back of

the tape in the direction of “SAVE”. This prevents the tape from being recorded over. To record on this tape, slide the tab back to “REC” before loading it.

Be sure to press only the section labeled “PUSH HERE” to close the cassette holder; touching other parts may cause your finger to get caught in the cassette holder, resulting in injury or product damage.

Approximate recording time

Tape

Recording mode

 

 

 

SP

LP

 

 

 

30 min.

30 min.

45 min.

 

 

 

60 min.

60 min.

90 min.

 

 

 

80 min.

80 min.

120 min.

 

 

 

NOTES:

●It takes a few seconds for the cassette holder to open. Do not apply force.

●If you wait a few seconds and the cassette holder does not open, close the cassette holder cover and try again. If the cassette holder still does not open, turn the camcorder off then on again.

●If the tape does not load properly, open the cassette holder cover fully and remove the cassette. A few minutes later, insert it again.

●When the camcorder is suddenly moved from a cold place to a warm environment, wait a short time before opening the cassette holder cover.

●Closing the cassette holder cover before the cassette holder comes out may cause damage to the camcorder.

●Even when the camcorder is switched off, a cassette can be loaded or unloaded. After the cassette holder is closed with the camcorder switched off, however, it may not recede. It is recommended to turn the power on before loading or unloading.

●When resuming recording, once you open the cassette holder cover a blank portion will be recorded on the tape or a previously recorded scene will be erased (recorded over) regardless of whether the cassette holder came out or not. See page 20 for information about recording from the middle of a tape.

Page 11 Page 13
Image 12
Page 11 Page 13
Contents GR-DVL915 GR-DVL715 GR-DVL515 GR-DVL510 GR-DVL410 GR-DVL310 Dear Customer It is recommended that youEN3 Make sure you only use cassettes with the Mini DV mark Memory cards can be used with GR-DVL915/DVL715/DVL515 onlyPower Cord Battery Pack BN-V408U Shoulder Strap RM-V711UAudio/Video Cable Ø3.5 mini-plug to RCA plug How To Attach The Core Filter Release the stoppers on both ends of the Core FilterContents Getting StartedPower Charging the Battery PackTo Detach The Battery Pack Slide BAT. Release and pull out the battery packUsing the Battery Pack Using AC PowerAbout Batteries Approximate recording timeGrip Adjustment Viewfinder Adjustment10 EN Shoulder Strap AttachmentDate/Time Settings EN1112 EN Loading/Unloading a CassetteRecording Mode Setting Set the tape recording mode depending on your preferenceEN13 Picture Quality Mode Setting Loading a Memory CardGR-DVL915/DVL715/DVL515 only To Unload a Memory CardVideo Recording & Playback Video Recording PlaybackTo Adjust The Brightness Of The Display 16 ENVideo Recording Basic RecordingOperation Mode EN17Journalistic Shooting SELF-RECORDINGSlide the Power Zoom Lever towards T 18 ENZoom Zoom OutFeature Video Light To brighten the scene when natural lighting is too dimEN19 Set Light OFF/AUTO/ON as requiredWhen a blank portion is recorded on a tape 20 ENTime Code Proper recordingTo Control The Speaker Volume Video PlaybackNormal Playback EN2122 EN Video PlaybackIf using a VCR . . . go to step If not . . . go to step EN23To cancel Blank Search midway 24 ENBlank Search Press Blank SearchDigital Still Camera C. Recording Playback Snapshot Mode Selection 26 ENBasic Shooting Snapshot Snapshot RecordingWhen unwanted still images are stored in the memory When you do not want to hear the shutter sound, setEN27 To Delete Unwanted Still ImagesPower Switch to 28 ENAuto Playback Index Screen Index PlaybackEN29 30 EN Jump PlaybackProtecting Images EN31To Protect AN Image To Remove Protection32 EN Deleting ImagesTo Delete the Displayed Image To Select AN Image by BrowsingEN33 To Delete ALL ImagesBefore doing the following, perform steps 1 through 3 on pg To Reset The Setting 34 ENTo Print ALL Still Images ONE Print for Each To Reset The No. Of Prints EN35To Print by Selecting Still Images and NO. of Prints 36 EN Initialising a Memory CardYou can initialise a memory card anytime Advanced Features For Recording38 EN For RecordingNight-Scope Programme AE With Special EffectsEN39 Gives recorded scenes a strobe effectYour recording looks like a series of consecutive snapshots Slow Slow Shutter40 EN Fade/Wipe EffectsFADE/WIPE Selection Picture Wipe or Dissolve SelectionEN41 Fader And Wipe MenuMenu Effect 42 EN Snapshot For Video RecordingFeature Auto Focus Feature Manual FocusEN43 To obtain correct focus44 EN Exposure ControlIris Lock White Balance Adjustment Manual White Balance OperationEN45 To Return To Automatic White BalanceEN Using Menus for Detailed Adjustment For Recording MenuIf you have selected WIPE/FADER Program AE or W. Balance See pgEN47 Menu Screen ExplanationsFactory setting is Recording. Also to activate the shutter sound effect  pgActivates the shutter sound effect  pg EN49 Following procedure applies to all except Synchro Comp  pg For Playback MenuDisplay EN51Playback Sound 52 EN DubbingDubbing To a VCR To use this camcorder as a playerDubbing From a VCR EN53To use this camcorder as a recorder GR-DVL915/DVL715 only VCR Playback deck54 EN DubbingEN55 To a Tape GR-DVL915/DVL715/DVL515 only56 EN Dubbing Images Recorded On a Tape To aMemory Card GR-DVL915/DVL715/DVL515 only Images can be dubbed from a tape to a memory cardUsing the Remote Control Unit Installing The BatteryEN57 58 EN Feature Slow-Motion Playback Feature Frame-By-Frame PlaybackFeature Playback Special Effects EN59Feature Playback Zoom 60 ENPress Play 4 to find the scene of interest EN61 SET REMOTE/VCR CodeVCR Recording deck JVC VCR equipped with a remote pause connector 62 ENMake Connections VCR other than aboveEN63 Select Scenes64 EN Automatic Editing to VCRAdjustment of VCR/CAMCORDER Timing For More Accurate EditingEN65 Diagnosing VCR/CAMCORDER TimingSet 12BIT Mode to Sound 2 or MIX Menu Screen  pg 66 ENAudio Dubbing To hear the dubbed sound during playbackEN67 Insert Editing GR-DVL915/DVL715/DVL515 onlyUsing USB or PC connection cable Using DV cableAUsing USB or PC connection cable Using DV cableConnection To a Video Unit Equipped With a DV Connector EN6970 EN ReferencesWhen you use the LCD monitor outdoors in direct sunlight, Cassette holder cannot be opened unless a power supply isEN71  pg72 EN Corrective ActionEN73 Troubleshooting 74 ENEN75 76 EN User Maintenance After Use Cleaning The CamcorderTurn off the camcorder Press Push Here to close the cassette holder78 EN 5 6EN79 80 EN Appears and blinks during shooting.  pgStandard in order of quality EN81 Displays the sound mode Level indicator moves Displays the dateLCD Monitor/Viewfinder Indications During Video Playback Bright Displays the brightness of the LCDEN83 Indications FunctionSwitch is set to  pgPossible Appears, the memory card is corruptedTo prevent damage and prolong service life EN85 Do not use near flammable or explosive materials To avoid hazards86 EN EN87 To protect the unit, do notAbout moisture condensation Serious malfunctioning88 EN TermsEN89 Time Code  pg , 49, 5090 EN For GeneralFor Digital Video Camera For Digital Still Camera GR-DVL915/DVL715/DVL515 onlyFor Connectors EN91GR-DVL310GR-DVL410GR-DVL510GR-DVL515GR-DVL715GR-DVL915
Related manuals
Manual 92 pages 40.43 Kb Manual 92 pages 61.64 Kb

GR-DVL310, GR-DVL715, GR-DVL915, GR-DVL410, GR-DVL515 specifications

The JVC GR-DVL915 is a compact digital camcorder that gained popularity in the early 2000s for its advanced features and impressive image quality. Designed for both amateur and semi-professional videographers, the GR-DVL915 offers a blend of performance, portability, and versatility, making it an appealing choice for those looking to capture life’s important moments.

One of the standout features of the GR-DVL915 is its 800,000-pixel CCD sensor, which ensures sharp image quality and vibrant colors. This camcorder supports both digital video and still image capture, enabling users to switch seamlessly between video recording and photography. The built-in 10x optical zoom allows for close-up shots without sacrificing image quality, while the 800x digital zoom extends this capability for distant subjects.

Equipped with a 2.5-inch LCD display, the GR-DVL915 offers a clear viewfinder that makes framing shots and navigating menus user-friendly. The LCD screen is also rotateable, providing flexibility when capturing from challenging angles. This camcorder is housed in a lightweight and compact body, making it easy to carry during travel or various shooting scenarios.

The GR-DVL915 features JVC's renowned Digital Image Stabilization technology, which significantly reduces the effects of camera shake, resulting in smoother, more professional-looking video recordings. Additionally, it includes various shooting modes and effects, such as fade in/out, backlight compensation, and various scene settings, allowing users to tailor their recordings to specific conditions.

In terms of connectivity, the camcorder is equipped with a FireWire (IEEE 1394) port for fast transfer of video to a computer for editing or archiving. It also supports standard video output formats, making it easy to connect to televisions for playback. The GR-DVL915 records onto miniDV tape, which ensures high-quality video playback and longevity.

Battery life is another important consideration, and the GR-DVL915 uses a rechargeable lithium-ion battery that provides ample recording time, enabling users to shoot extended sessions without frequent recharges.

Overall, the JVC GR-DVL915 represents a well-rounded camcorder that combines ease of use with a solid array of features. Its rigorous design and dependable performance make it an enduring choice for many video enthusiasts seeking to capture their experiences in high quality.
Top Page Image Contents