JVC GR-DVL515, GR-DVL915, GR-DVL510 Using DV cable, AUsing USB or PC connection cable

Page 68

68 EN

SYSTEM

CONNECTIONS

[A]Using USB or PC connection cable

 

 

 

GR-DVL510/DVL410/DVL310 only

 

 

To PC

PC connection cable

 

To

(provided with

 

 

RS-232C

(DIGITAL PHOTO)

GR-DVL510/DVL410 only)

 

 

 

To USB

USB cable

 

To USB

 

(provided)

 

connector

GR-DVL915/DVL715/DVL515 only

 

PC

 

 

[B] Using DV cable

OR

 

 

Power Switch

 

 

 

 

 

Core filter

Core filter

To DV

DV cable

 

To DV

 

(optional)

 

connector

VIDEO/DSC Switch (GR-DVL915/DVL715/DVL515 only;

 

PC with DV

 

connector

open the LCD monitor to access this switch.)

 

 

 

 

 

Connection To A Personal Computer

[A] Using USB or PC connection cable

This camcorder can transfer still images to a PC by using the software (GR-DVL915/DVL715/DVL515/ DVL510/DVL410: provided, GR-DVL310: optional software HS-V16KIT).

[B] Using DV cable

It is also possible to transfer still images to a PC with a DV connector by using software equipped with the PC or commercially available software.

1 Make sure the camcorder and PC are turned off.

2 Connect the camcorder to your PC using the appropriate cable as shown in the illustration.

3 For GR-DVL915/DVL715/DVL515 Owners: If you are using the USB connection, set the VIDEO/DSC switch to “DSC”.

•Only the still images stored in the memory card can be transferred to a PC.

4 Turn the camcorder’s Power Switch to “ ” while pressing down the Lock Button located on the switch and turn on the PC.

•Refer to the instruction manual of the software on how to transfer a still image to the PC.

5 When finished, turn off the PC first, then the camcorder.

NOTES:

●It is recommended to use the AC Adapter as the

power supply instead of the battery pack ( pg. 9).

●Never connect the USB or PC connection cable and the DV cable simultaneously to the camcorder. Connect only the cable you wish to use to the camcorder.

●If the PC connected to the camcorder via the USB cable is not powered, the camcorder does not enter the USB mode.

●The date/time information cannot be captured into the PC.

●Refer to the instruction manuals of the PC and Software.

●The still images can also be transferred to a PC with a DV connector-equipped capture board.

●When using a DV cable, be sure to use the optional JVC VC-VDV206U or VC-VDV204U DV cable depending on the type of DV connector (4 or 6 pins) on the PC, or use the DV cable provided with the capture board.

●The system may not work properly depending on the PC or capture board you are using.

For GR-DVL915/DVL715/DVL515 Owners: “USB MODE” and/or “ACCESSING FILE” appears on the LCD monitor while the PC is accessing data in the camcorder or the camcorder is transferring a file to the PC.

NEVER disconnect the USB cable while

“ACCESSING FILE” is displayed on the LCD monitor since this can result in product damage.

Page 67 Page 69
Image 68
Page 67 Page 69
Contents GR-DVL915 GR-DVL715 GR-DVL515 GR-DVL510 GR-DVL410 GR-DVL310 Dear Customer It is recommended that youEN3 Make sure you only use cassettes with the Mini DV mark Memory cards can be used with GR-DVL915/DVL715/DVL515 onlyAudio/Video Cable Ø3.5 mini-plug to RCA plug Power Cord Battery Pack BN-V408U Shoulder StrapRM-V711U How To Attach The Core Filter Release the stoppers on both ends of the Core FilterContents Getting StartedPower Charging the Battery PackTo Detach The Battery Pack Slide BAT. Release and pull out the battery packUsing the Battery Pack Using AC PowerAbout Batteries Approximate recording timeGrip Adjustment Viewfinder Adjustment10 EN Shoulder Strap AttachmentDate/Time Settings EN1112 EN Loading/Unloading a CassetteEN13 Recording Mode SettingSet the tape recording mode depending on your preference Picture Quality Mode Setting Loading a Memory CardGR-DVL915/DVL715/DVL515 only To Unload a Memory CardVideo Recording & Playback Video Recording PlaybackTo Adjust The Brightness Of The Display 16 ENVideo Recording Basic RecordingOperation Mode EN17Journalistic Shooting SELF-RECORDINGSlide the Power Zoom Lever towards T 18 ENZoom Zoom OutFeature Video Light To brighten the scene when natural lighting is too dimEN19 Set Light OFF/AUTO/ON as requiredWhen a blank portion is recorded on a tape 20 ENTime Code Proper recordingTo Control The Speaker Volume Video PlaybackNormal Playback EN2122 EN Video PlaybackIf using a VCR . . . go to step If not . . . go to step EN23To cancel Blank Search midway 24 ENBlank Search Press Blank SearchDigital Still Camera C. Recording Playback Snapshot Mode Selection 26 ENBasic Shooting Snapshot Snapshot RecordingWhen unwanted still images are stored in the memory When you do not want to hear the shutter sound, setEN27 To Delete Unwanted Still ImagesAuto Playback Power Switch to28 EN EN29 Index ScreenIndex Playback 30 EN Jump PlaybackProtecting Images EN31To Protect AN Image To Remove Protection32 EN Deleting ImagesTo Delete the Displayed Image To Select AN Image by BrowsingBefore doing the following, perform steps 1 through 3 on pg EN33To Delete ALL Images To Print ALL Still Images ONE Print for Each To Reset The Setting34 EN To Print by Selecting Still Images and NO. of Prints To Reset The No. Of PrintsEN35 You can initialise a memory card anytime 36 ENInitialising a Memory Card Advanced Features For Recording38 EN For RecordingNight-Scope Programme AE With Special EffectsEN39 Gives recorded scenes a strobe effectYour recording looks like a series of consecutive snapshots Slow Slow Shutter40 EN Fade/Wipe EffectsFADE/WIPE Selection Picture Wipe or Dissolve SelectionMenu Effect EN41Fader And Wipe Menu 42 EN Snapshot For Video RecordingFeature Auto Focus Feature Manual FocusEN43 To obtain correct focusIris Lock 44 ENExposure Control White Balance Adjustment Manual White Balance OperationEN45 To Return To Automatic White BalanceEN Using Menus for Detailed Adjustment For Recording MenuIf you have selected WIPE/FADER Program AE or W. Balance See pgEN47 Menu Screen ExplanationsActivates the shutter sound effect  pg Factory setting isRecording. Also to activate the shutter sound effect  pg EN49 Following procedure applies to all except Synchro Comp  pg For Playback MenuPlayback Sound DisplayEN51 52 EN DubbingDubbing To a VCR To use this camcorder as a playerDubbing From a VCR EN53To use this camcorder as a recorder GR-DVL915/DVL715 only VCR Playback deck54 EN DubbingEN55 To a Tape GR-DVL915/DVL715/DVL515 only56 EN Dubbing Images Recorded On a Tape To aMemory Card GR-DVL915/DVL715/DVL515 only Images can be dubbed from a tape to a memory cardEN57 Using the Remote Control UnitInstalling The Battery 58 EN Feature Slow-Motion Playback Feature Frame-By-Frame PlaybackFeature Playback Special Effects EN59Press Play 4 to find the scene of interest Feature Playback Zoom60 EN VCR Recording deck EN61SET REMOTE/VCR Code JVC VCR equipped with a remote pause connector 62 ENMake Connections VCR other than aboveEN63 Select Scenes64 EN Automatic Editing to VCRAdjustment of VCR/CAMCORDER Timing For More Accurate EditingEN65 Diagnosing VCR/CAMCORDER TimingSet 12BIT Mode to Sound 2 or MIX Menu Screen  pg 66 ENAudio Dubbing To hear the dubbed sound during playbackEN67 Insert Editing GR-DVL915/DVL715/DVL515 onlyUsing USB or PC connection cable Using DV cableAUsing USB or PC connection cable Using DV cableConnection To a Video Unit Equipped With a DV Connector EN6970 EN ReferencesWhen you use the LCD monitor outdoors in direct sunlight, Cassette holder cannot be opened unless a power supply isEN71  pg72 EN Corrective ActionEN73 Troubleshooting 74 ENEN75 76 EN User Maintenance After Use Cleaning The CamcorderTurn off the camcorder Press Push Here to close the cassette holder78 EN 5 6EN79 Standard in order of quality 80 ENAppears and blinks during shooting.  pg EN81 Displays the sound mode Level indicator moves Displays the dateLCD Monitor/Viewfinder Indications During Video Playback Bright Displays the brightness of the LCDEN83 Indications FunctionSwitch is set to  pgPossible Appears, the memory card is corruptedTo prevent damage and prolong service life EN85 Do not use near flammable or explosive materials To avoid hazards86 EN EN87 To protect the unit, do notAbout moisture condensation Serious malfunctioning88 EN TermsEN89 Time Code  pg , 49, 5090 EN For GeneralFor Digital Video Camera For Digital Still Camera GR-DVL915/DVL715/DVL515 onlyFor Connectors EN91GR-DVL310GR-DVL410GR-DVL510GR-DVL515GR-DVL715GR-DVL915
Related manuals
Manual 92 pages 40.43 Kb Manual 92 pages 61.64 Kb

GR-DVL310, GR-DVL715, GR-DVL915, GR-DVL410, GR-DVL515 specifications

The JVC GR-DVL915 is a compact digital camcorder that gained popularity in the early 2000s for its advanced features and impressive image quality. Designed for both amateur and semi-professional videographers, the GR-DVL915 offers a blend of performance, portability, and versatility, making it an appealing choice for those looking to capture life’s important moments.

One of the standout features of the GR-DVL915 is its 800,000-pixel CCD sensor, which ensures sharp image quality and vibrant colors. This camcorder supports both digital video and still image capture, enabling users to switch seamlessly between video recording and photography. The built-in 10x optical zoom allows for close-up shots without sacrificing image quality, while the 800x digital zoom extends this capability for distant subjects.

Equipped with a 2.5-inch LCD display, the GR-DVL915 offers a clear viewfinder that makes framing shots and navigating menus user-friendly. The LCD screen is also rotateable, providing flexibility when capturing from challenging angles. This camcorder is housed in a lightweight and compact body, making it easy to carry during travel or various shooting scenarios.

The GR-DVL915 features JVC's renowned Digital Image Stabilization technology, which significantly reduces the effects of camera shake, resulting in smoother, more professional-looking video recordings. Additionally, it includes various shooting modes and effects, such as fade in/out, backlight compensation, and various scene settings, allowing users to tailor their recordings to specific conditions.

In terms of connectivity, the camcorder is equipped with a FireWire (IEEE 1394) port for fast transfer of video to a computer for editing or archiving. It also supports standard video output formats, making it easy to connect to televisions for playback. The GR-DVL915 records onto miniDV tape, which ensures high-quality video playback and longevity.

Battery life is another important consideration, and the GR-DVL915 uses a rechargeable lithium-ion battery that provides ample recording time, enabling users to shoot extended sessions without frequent recharges.

Overall, the JVC GR-DVL915 represents a well-rounded camcorder that combines ease of use with a solid array of features. Its rigorous design and dependable performance make it an enduring choice for many video enthusiasts seeking to capture their experiences in high quality.
Top Page Image Contents