JVC GRDVL140 Automatic demonstration will not take place, Appearing on the connected TV screen

Page 37

: Factory-preset

NOTES:

● “ SYSTEM” and “

					EN37

	DEMO			OFF	Automatic demonstration will not take place.
	MODE
	MODE			ON	Demonstrates certain functions such as Programme AE with special effects,
				ON
					etc., and can be used to confirm how these functions operate. When “DEMO
					MODE” is set to “ON” and the Menu Screen is closed, demonstration starts.
SYSTEM					Performing any operation during the demonstration stops the demonstration
SYSTEM					NOTES:
					temporarily. If no operation is performed for more than 1 minute after that,
					the demonstration will resume.
					● If a tape is in the camcorder, the demonstration cannot be turned on.
					● “DEMO MODE” remains “ON” even if the camcorder power is turned off.
					● If “DEMO MODE” remains “ON”, some functions will not be available.
					After viewing demo, set to “OFF”.
	CAM			CANCEL	Does not reset all settings to the factory-preset.
	RESET			EXECUTE	Resets all settings to the factory-preset.
				EXECUTE	Resets all settings to the factory-preset.

	ON			LCD	Keeps the camcorder’s display (except the date, time and time code) from
	SCREEN				appearing on the connected TV screen.

				LCD/TV	Makes the camcorder’s display appear on screen when the camcorder is
					connected to a TV.
					connected to a TV.
	DATE/			OFF	The date/time does not appear.
	TIME
DISPLAY	TIME			AUTO	Displays the date/time for approx. 5 seconds in the following cases:
				AUTO
					are recorded.
					• When the Power Switch is set from “OFF” to “ ” or “ ”.
					• When playback starts. The camcorder displays the date/time when scenes
					• When the date is changed during playback.
				ON	The date/time is always displayed.

	TIME			OFF	Time code is not displayed.
	CODE			ON	Time code is displayed on the camcorder and on the connected TV. Frame
				ON
					numbers are not displayed during recording.

	CLOCK ADJ.				Allows you to set the current date and time ( pg. 12).

DISPLAY” functions which are set when the Power Switch is set to “ ” are also

applied when the Power Switch is set to “ ” ( pg. 38). “CLOCK ADJ.” only appears when the Power Switch is set to “ ”.

● The “ DISPLAY” settings are effective even when the Power Switch is set to “ ”.

Image 37

Contents GR-DVL140 Unit, first firmly It is recommended that youAC Adapter until Some DO’S and DON’TS on the Safe USE of Equipment Make sure you only use cassettes with the Mini DV mark Before recording an important sceneLens Cap Power Cord Cable AdapterBN-V408U Core Filter xRelease the stoppers on both ends of the Core Filter How To Attach The Core FilterGetting Started ContentsCharging the Battery Pack PowerTo Detach The Battery Pack Slide BAT. Release and pull out the battery packUsing AC Power Using the Battery PackPerform of Charging the Battery Pack pg Approximate recording timeViewfinder Adjustment Grip Adjustment10 EN Tripod Mounting Shoulder Strap Attachment12 EN Date/Time SettingsLoading/Unloading a Cassette Camcorder needs to be powered up to load or eject a cassetteSet the tape recording mode depending on your preference Recording Mode Setting14 EN Basic Recording Playback Basic Recording & PlaybackBasic Recording 16 ENBasic Recording Power Switch Position Manual Operation ModeJournalistic Shooting SELF-RECORDING18 EN Slide the Power Zoom Lever towards TZoom Zoom OutTime Code When a blank portion is recorded on a tapeProper recording To Control The Speaker Volume Load a tape pg Set the Power Switch to20 EN BasicBlank Search To cancel Blank Search midwayPress Blank Search 22 EN If your TV/VCR has a 21-pin connectorConnections CamcorderEN23 If using a VCR . . . go to step If not . . . go to step24 EN Advanced FeaturesFeature Manual Focus Feature Auto FocusFor Recording To obtain correct focus26 EN To Deactivate The Selected ModeNight-Scope Programme AE With Special EffectsYour recording looks like a series of consecutive snapshots Gives recorded scenes a strobe effectSlow Slow Shutter Fade/Wipe Effects 28 ENFADE/WIPE Selection Picture Wipe or Dissolve SelectionMenu Effect Fader And Wipe Menu30 EN Snapshot Mode SelectionSnapshot Snapshot RecordingEN31 Exposure Control 32 ENIris Lock Manual White Balance Operation White Balance AdjustmentTo Return To Automatic White Balance To Change The Tint For RecordingIf you have selected WIPE/FADER Program AE or W. Balance EN Using Menus for Detailed AdjustmentSee pg System or DisplayMenu Screen Explanations Normal screen ratio Factory setting isScreen ratio becomes VerticallyResets all settings to the factory-preset Does not reset all settings to the factory-presetAutomatic demonstration will not take place Appearing on the connected TV screenPower Switch is set to pg Mode SP or LP depending onYour preference pg SYSTEM, which appears whenDisplay Playback SoundDubbing 40 ENDubbing To a VCR EN41 Installing The Battery EN Using the Optional Remote Control UnitFunctions Buttons EN4344 EN Feature Playback ZoomPress Play 4 to find the scene of interest VCR Recording deck SET REMOTE/VCR CodeTo press VCR CTL for this one You are now ready to try Random Assemble EditingMake Connections JVC VCR equipped with a remote pause connectorVCR other than above Select Scenes Cancelled and editing will not take placeAutomatic Editing to VCR For More Accurate Editing Adjustment of VCR/CAMCORDER TimingDiagnosing VCR/CAMCORDER Timing Audio Dubbing Set 12BIT Mode to Sound 2 or MIX Menu Screen pgTo hear the dubbed sound during playback Using DV cable Using PC connection cable52 EN Connection To a Video Unit Equipped With a DV ConnectorReferences Cassette holder cannot be opened unless a power supply is When you use the LCD monitor outdoors in direct sunlight,Time required to calculate and display the remaining tape Clean the lens and check TroubleshootingCorrective Action Replace with new cassette56 EN TroubleshootingEN57 58 EN EN59 5 6 @ # $ 60 ENFast-Forward Button pg Backlight Button @ Power Switch Dioptre Adjustment Control pg Battery Release SwitchAudio/Video Output Connector pg , 40 Power Lamp pgLCD Monitor/Viewfinder Indications During Recording 62 ENLCD Monitor/Viewfinder Indications During Playback Displays the sound modeBright Displays the brightness of the LCD Appears when no tape is loaded pg Displays the battery remaining powerSwitch is set to or pg Cleaning cassette pgAfter Use Cleaning The Camcorder User MaintenanceTurn off the camcorder Press Push Here to close the cassette holder66 EN To protect the unit, do not Do not leave the unitAbout moisture condensation Serious malfunctioningTerms 68 ENTime Code pg , 37, 38 EN6970 EN Approx g not including Power Cord Power requirementAC 110 V to 240 V`, 50 Hz/60 Hz DC 11GR-DVL140