Basic Recording, Tape Recording | JVC GR-DX106/76AG specification

JVC GR-DX106/76AG manual Basic Recording, To Adjust The Brightness Of The Display, Tape Recording

Basic Recording

Perform the procedures listed below before continuing.

●Power ( pg. 7)

●Grip Adjustment ( pg. 8)

●Viewfinder Adjustment ( pg. 8)

●Load A Cassette ( pg. 9)

●Recording Mode Setting ( pg. 10)

1 Remove the lens cap.

Pull on bottom end Q of LCD monitor to open and set the VIDEO/MEMORY Switch t to “VIDEO”.

2 Set the Power Switch @ to “ ” or “ ” while pressing down the Lock Button $ located on the switch.

Shooting while using the LCD monitor: Open the

LCD monitor fully.

Shooting while using the viewfinder: Pull out the

viewfinder fully.

•The Power lamp 0 lights and the camcorder enters the Record-Standby mode. “PAUSE” 8 is displayed.

•The image will not appear simultaneously on the LCD

monitor and the viewfinder. See “PRIORITY” in the SYSTEM Menu ( pg. 34).

3 Press the Recording Start/Stop Button !. “	”
4, 8 appears and the tally lamp ^ lights while
recording is in progress.

•To Stop Recording, press the Recording Start/Stop Button !. The camcorder re-enters the Record- Standby mode.

To Adjust The Brightness Of The Display

..... press MONITOR BRIGHT + or – 5 until the bright

level indicator o on the display moves and the appropriate brightness is reached.

•It is also possible to adjust the brightness of the

viewfinder. Pull out the viewfinder, set “PRIORITY” in the SYSTEM Menu to “FINDER” ( pg. 34) and adjust as described above.

During shooting

0	PLAY	OFF	A	M	Q
0

	CH
!	AR
!	S
	E
	S
	E
	L
	T
	T
	U
	H
@					$

Display

0h25mh m (Now calculating)

1h30m

1h29m

Tape remaining time
indicator (Approximate)	0h	3m
	0h	3m

0h 2m (Blinking)

0h 1m (Blinking)

0h 0m (Blinking)

NOTES:

●If the Record-Standby mode continues for 5 minutes, the camcorder’s power shuts off automatically. To turn the camcorder on again, push back and pull out the viewfinder again or close and re-open the LCD monitor.

●When a blank portion is left between recorded scenes on the tape, the time code is interrupted and errors may occur when editing the tape. To avoid this, refer to

“RECORDING FROM THE MIDDLE OF A TAPE” ( pg. 14).

●To turn the tally lamp ^ or beep sounds off, pg. 34.

●When you use the LCD monitor outdoors in direct sunlight, the LCD monitor may be difficult to see. If this happens, use the viewfinder instead.

●Black spots or bright spots of light (red, green or blue)

may appear constantly on the LCD monitor or the viewfinder ( pg. 47).

●When the Recording Start/Stop button ! is pressed, it may take a few seconds before actual recording starts. “ ” 4 starts rotating when the camcorder actually starts recording.

●The time required to calculate and display the remaining tape length, and the accuracy of the calculation, may vary according to the type of tape used.

●“TAPE END” appears when the tape reaches its end, and the power goes off automatically if left in this condition for 5 minutes. “TAPE END” also appears when a cassette at

its end is loaded.

12 TAPE RECORDING

GR-DX106/76AG specifications

The JVC GR-DX106/76AG is a compact and versatile MiniDV camcorder that has gained attention for its robust feature set and user-friendly design. Launched in the early 2000s, this camcorder is ideal for both amateur filmmakers and those who want to capture life's precious moments with high-quality video.

One of the standout features of the GR-DX106/76AG is its advanced optical zoom capabilities. With a powerful 10x optical zoom lens, users can capture distant subjects without sacrificing image quality. Additionally, the camcorder is equipped with a digital zoom that can reach up to 400x, allowing for extreme close-ups when needed. This versatility makes it suitable for various shooting conditions, from family gatherings to outdoor adventures.

The camcorder utilizes a 1/6-inch CCD sensor, providing clear and vibrant images even in challenging lighting conditions. The CCD technology ensures high-resolution video capture, enabling users to record in a resolution of up to 640 x 480 pixels in MPEG format. The GR-DX106/76AG also supports progressive scan recording, further enhancing the quality of the footage.

Another notable technology found in the JVC GR-DX106/76AG is its built-in image stabilization system. This feature is crucial for reducing the blurriness caused by hand movements, ensuring that videos remain smooth and professional-looking. The camcorder also offers a variety of shooting modes, including night mode, which enhances low-light performance, as well as various scene modes that tailor the camera’s settings to specific environments.

User convenience is prioritized in the design of the GR-DX106/76AG. The camcorder features a flip-out LCD screen that allows for easy framing and playback of recorded videos. This screen provides a clear view of the scene, making it easier to capture the perfect shot. Additionally, the camcorder has an intuitive menu system, allowing users to quickly adjust settings without feeling overwhelmed.

The GR-DX106/76AG also includes various connectivity options, such as USB and AV outputs, enabling easy transfer of footage to computers or TVs. This compatibility allows for seamless editing and sharing of videos, catering to the needs of the modern user.

In summary, the JVC GR-DX106/76AG is a feature-rich camcorder that combines portability with advanced recording capabilities. Its optical zoom, image stabilization, and user-friendly interface make it an excellent choice for capturing high-quality video in a variety of scenarios. Whether for documenting family events or exploring creative filmmaking, this camcorder remains a solid option for enthusiasts.