EN
23
Exposure Control
When the subject appears too dark or too bright on the LCD monitor, it may be necessary to compensate for the ambient brightness. This will make it possible to capture the contours of the dark and bright regions of the image more clearly.
NOTE:
Use the flash when the low light “
” icon appears.
Power Dial | MENU Jog Dial |
Lock button
OFF
| P |
L | |
YA |
|
LCD monitor
To darken the image
To brighten the image
CAMERA MENU 
CAMERA
P I CTURE MODE
SYSTEM
EX I T
CAMERA MENU Screen
CAMERA
EXPOSURE 0 M .W. B . AUTO SHUTTER SPEED AUTO EX I T
CAMERA Setup Screen
EXPOSURE
+6
EX I T
EXPOSURE Setup Screen
Turn the Power Dial, while pressing its Lock | ||
1 Button, to “ | M | ” or “ ” and push the MENU |
Jog Dial.
•The CAMERA MENU Screen appears.
2 Rotate the MENU Jog Dial to select “CAMERA” and push it.
•The CAMERA Setup Screen appears.
3 Rotate the MENU Jog Dial to select “EXPOSURE” and push it.
•The EXPOSURE Setup Screen appears.
4 Rotate the MENU Jog Dial to select the current value and push it.
•The item color changes to indicate that setting is possible.
5 Rotate the MENU Jog Dial to adjust the exposure.
•The exposure value can be selected from
To brighten the image:
Increase the exposure value. (maximum +6)
To darken the image:
Decrease the exposure value. (maximum
6 Push the MENU Jog Dial twice.
•The EXPOSURE Setup Screen disappears. •The exposure value is set and the shooting
screen reappears.
To adjust a previously set exposure value . . .
.... repeat the above procedure from step 1.
NOTE:
To set the exposure value to the standard level, set the exposure value to “0” or turn the Power Dial to
“ | A | ”. |
|
|