JVC GC-S1 manual 50 cm, Reception is complete when this message disappears

IrTran-P infrared communication compatible equipment

15° 15°

< 50 cm

15° 15°

EN53

4 Position the transmitting and receiving equipment so that their infrared transmitter and receiver face opposite each other.

•The distance between them should be less than 1.6 ft. (50 cm), and the transmitter and receiver should be angled no more than 15° to each other.

5 If the camera is the transmitting equipment, press the FLASH/TRANSFER Button.

•The message “TRANSMISSION IN PROGRESS” is displayed, and image transfer starts.

•During image transfer, only one image should be displayed. If a menu screen or index screen is displayed, transfer is impossible.

•If the message “TRANSMISSION FAILED” is displayed 30 seconds after the FLASH/ TRANSFER Button is pressed, check the equipment orientation, power supplies, etc. and retry the transfer.

•To abort transfer in the middle, press the CLEAR Button. The message “TRANSMIS- SION TO BE STOPPED” is displayed.

6 If the camera is the receiving equipment, the message “RECEPTION IN PROGRESS” is displayed.

•Reception is complete when this message disappears.

•If the message “RECEPTION FAILED” appears, check the equipment orientation, power supplies, etc. and retry the transfer.

•To abort transfer in the middle, press the CLEAR Button.

•Image data is received in the “FINE” Picture Quality mode.

•It is recommended that you use the optional AC power adapter during data transfer.