Recording
Adjusting Focus Manually
Set this when the focus is not clear in Intelligent Auto or when manual focusing is desired.
Memo :
To select/move cursor towards up/left or down/right, press the button UP/< or DOWN/>.
.
1Select the Manual recording mode.
.
0If the mode is P Intelligent Auto, press the i.AUTO button to switch to H Manual.
The mode changes between Intelligent Auto and Manual with every press.
2Press MENU.
.
3Select “MANUAL SETTING” and press OK.
MANUAL SETTING
.
4Select “FOCUS” and press OK.
FOCUS
.
5Select “MANUAL” and press OK.
MANUAL
.
6Adjust the focus with the UP/< and DOWN/> buttons.
0:00:00 [05:56]
.
0Press UP/< to focus on a distant subject.
0Press DOWN/> to focus on a near subject.
7Press OK to confirm.
0:00:00 [05:56]
.
0When focus is confirmed, the focusing frame disappears and E and pare displayed. (The icons may appear blinking.)
Memo :
0A subject that is focused at the telephoto (T) end remains in focus when it is zoomed out to the wide angle (W) end.
0“FOCUS” cannot be set during
25