JVC KY-F550 instruction manual Process 1/2 Screen, Low

5. Setting Via the Menu Screen (continued)

“PROCESS (1/2)” Screen

Settings in bold are factory settings

	Item		Function/Variable Values
“MASTER		For adjusting the pedestal level (master black), which is based on the black colour
BLACK”		when the lens cap is being put on. To view the black portion, increase the pedes-
		tal level to brighten the entire screen.
		Increase value	: Increases pedestal.
		Decrease value	: Decreases pedestal.
		{Variable Values: –10 - 0 - +10}
“DETAIL”		For setting to highlight the contour (detail).
		“ON”	: Highlight of contour enabled.
		“OFF”	: Highlight of contour disabled.
			“LEVEL”, “V/H BALANCE”, “FREQUENCY” items are
			displayed as “- - - - - -”.
		Caution
		When “LOLUX” is activated, the adjustment feature will not work even if the menu
		operation under “DETAIL” item is performed. (Displayed as “(OFF)”)
	“LEVEL”	For setting highlight level of contour (detail) when “DETAIL” is set to “ON”.
		Increase value	: Sharpens contour.
		Decrease value	: Softens contour.
		{Variable Values : –10 - 0 - +10}
	“V/H BALANCE”	For setting whether to emphasize the horizontal (H) or vertical (V) direction during
		contour highlight (detail) when “DETAIL” is set to “ON”.
		Increase value	: Emphasize on H direction.
		Decrease value	: Emphasize on V direction.
		{Variable Values : –5 - 0 - +5}
	“FREQUENCY”	For altering the frequency for contour highlight (detail) when “DETAIL” is set to
		“ON”. Set this according to the object.
		“LOW”	: Lowers the frequency for contour highlight.
			Use this when shooting objects with large patterns.
		“MIDDLE”	: Sets the frequency for contour highlight to standard.
		“HIGH”	: Increases the frequency for contour highlight.
			Use this when shooting objects with fine patterns.
“V. RESOLUTION”		For increasing the vertical resolution.
		“NORMAL”	: Vertical resolution of approx. 380 lines.
		“V.MAX”	: Vertical resolution of approx. 450 lines.
		Caution
		In the case of “V.MAX”, colours may be found on the brighter portions of the object
		depending on its colour temperature. In addition, when the “LEVEL” item under
		“SHUTTER” is set to “NORMAL”, there will be more residual images. For the
		settings other than “NORMAL”, image will be darker than “NORMAL” as the sen-
		sitivity is decreased by half.

E-38