JVC GR-AXM10, GR-AXM20 manual BATT. Release, Eject Push Monitor Open, Play/Pause, Stop REW

QUICK OPERATION GUIDE

SUPPLY POWER

Hook on.

1

2 Push in.

BATT. RELEASE

Using the battery pack

1Hook-on the battery pack's top end to the camcorder. (Charging procedure, ☞ pg. 8)

2Push in the battery pack until it locks into place.

To remove the battery pack

Slide BATT. RELEASE and pull out the battery pack.

EN 5

INSERTING A VIDEO

CASSETTE

EJECT

2

4 3

1PUSH

MONITOR OPEN

1Slide MONITOR OPEN to open the LCD monitor.

•Open to an angle of over 45 degrees.

2Press EJECT to open the cassette holder.

3Insert a video cassette.

4Press PUSH to close the cassette holder. (For more details, ☞ pg. 13)

PLAYBACK

PLAY/PAUSE 3

SHOOTING

1

STOP

2

REW

2

LENS COVER open/close knob

1

Set to “PLAY”

1Set the power switch to “PLAY”.

2Press REW.

—The tape will automatically stop at the beginning of the tape.

3Press PLAY/PAUSE.

—Playback starts and the playback picture appears in the viewfinder or the LCD

monitor.

•To stop playback, press STOP. (For more details, ☞ pg. 32.)

•The viewfinder switches off automatically to save power when the LCD monitor is opened at an angle of over 45 degrees.

•The LCD monitor turns on/off when it is opened/closed at approx. 45 degrees.

Or simply play back the tape on a VHS VCR using the Cassette Adapter (VHS Playpak).

☞pg. 35

Set to “CAMERA”

3 Recording Start/Stop button

1 Slide the LENS COVER open/close knob to open the lens cover.

2 Set the power switch to “CAMERA”.

—The power indicator will light and an image will appear in the LCD monitor or

the viewfinder.

3 Press the Recording Start/Stop button.

—Recording starts.

•To stop recording temporarily, momentarily press the Recording Start/Stop button once

again.

(For more details, ☞ pg. 15, 16)

•The viewfinder switches off automatically to save power when the LCD monitor is opened at an angle of over 45 degrees.

•The LCD monitor turns on/off when it is opened/closed at approx. 45 degrees.