JVC GR-AXM10, GR-AXM20 manual Symptom

Page 45

TROUBLESHOOTING

 

EN 45

SYMPTOM

 

POSSIBLE CAUSE(S)

 

POWER

 

 

 

No power is supplied.

 

The battery pack has not been attached correctly

 

 

(pg. 8).

 

 

The battery pack is not charged (pg. 8).

 

 

The power supply has not been correctly connected

 

 

(pg. 9).

The power suddenly goes off and doesn’t come back on by itself.

The battery pack has completely discharged.

Remove the cassette and disconnect the power source, then after a few minutes, try turning the power back on. If it still doesn’t come on, consult your nearest JVC dealer.

RECORDING

Recording cannot be performed.

The recording tape’s Erase Protection tab is missing. Cover

 

the hole with adhesive tape. (Some tapes have sliding

 

tabs. In this case, check the position of the tab.)

Recording does not start.

The camcorder Power switch has not been set to “CAM-

 

ERA” (pg. 15).

 

 

PLAYBACK

The tape is running, but there’s no playback picture.

The TV has not been set to its VIDEO mode or channel.

If A/V connection is used, the TV’s VIDEO/TV switch has not been set to VIDEO.

The RF unit has not been set to the correct channel.

Noise bars appear in the playback picture.

Manual Tracking has not been performed (pg. 33).

Playback picture is blurred or

 

The video heads are dirty or worn out. Consult your

interrupted.

 

nearest JVC dealer for head cleaning or replacement.

The counter indication is blurred

 

This is normal.

during Still playback.

 

 

 

 

 

TAPE TRANSPORT

 

 

The tape stops during fast-forward

 

The Counter Memory Function has been activated

or rewind.

 

(pg. 33).

Rewinding or fast-forwarding cannot

 

The tape is already fully wound on one reel or the other.

be performed.

 

 

 

 

 

Image 45
Contents For Customer Use GR-AXM20 GR-AXM10It is recommended that you Dear CustomerAntenna Installation Instructions InstallationUSE ServicingTo avoid personal injury Eject Push Monitor Open BATT. ReleasePLAY/PAUSE Stop REWP7U BN-V11UContents Supply Power PowerAttach Battery Pack Detach Battery PackAA-V11U DC OUTViewfinder Adjustment Start Clock Operation Close MenuNear Menu FAR SET Recording Mode Recording Mode SettingSet Power to Camera Tape length indicator LCD monitor or viewfinder Recording mode indicatorLoading/Unloading a Cassette EN Getting S Tarted Grip AdjustmentShoulder Strap Attachment Tripod MountingLoad a Cassette Enter RECORD-STANDBY ModeStart Shooting Stop RecordingBefore the following steps, perform pg Start/Stop Power indicatorJournalistic shooting Self-recordingBrightness control EN Recording FeatureRetake R/F PurposeSET Video Light Video Light GR-AXM20 onlyLight OFF/AUTO/ON JVC dealer for replacing the video lightProgram AE With Special Effects Exposure Control Restore Initial SettingBrighten Image Darken ImageEN Recordi NG FocusingLock Focus Release Focus LockFAR Near Power zoom lever Program AE select dialWide FaderCharacter Generator Instant TitlesSelect Display SELPress SEL. repeatedly until DISP. appears Adjust Focus Manual White Balance Adjustment M.W.BAdjust White Balance Select White BalanceDetailed camcorder settings Make SettingMenu This camcorder is equipped with an easy-to-useGain UP Interval Timer OFFNorm OFFMenu FAR Near Time-Lapse AnimationSpeaker volume control EN PlaybackRewind or Fast-forward the tape FF Stop REW PLAY/PAUSE Counter R/M Feature Connection To a VCR a EN Playback Basic Conn ectionsEditing, Dubbing and Playback Connect Camcorder to TVInsert Cassette in Adapter Cassette Adapter VHS PlayPakPlay Back on Connected VCR Remove Cassette from AdapterVCR Recording deck SET Remote to Operate VCR Random Assemble Editing R.A.EditOperate the VCR Connect toDitin G END Automatic Editing Begin Automatic EditingEdited Tape VCR Stop EditPull OUT Battery Holder Installing The BatteryReplace Battery Holder FunctionsRec Time Indicator LCD monitor or viewfinder Index Code Marking Interval Timer IndicatorViss RM-V700UCounter R/M Power IndicatorSTART/STOP REW Play Pause Insert Audio dubbing indicator MicrophoneDUB Set to Power OFF BATT. Release Push EjectRemove Symptom Lens Cover Warning indicator may blink when Viewfinder Power sourceLens Cover Warning indicator Tape won’t ejectTape End Display ................................ pg Focus Indicator48EN Counter R Reset/M Memory Power Switch Pg.15 Recording Mode SP/EP SelectBright Dial Volume Dial Tally Lamp Power On IndicatorDate/Time Setting Auto Mode Lock ModeDiopter Adjust Manual Focus MBR Code Setting ND Effect Mode PlaybackPlug adapter Using Household AC Plug AdapterTo avoid hazard InformationAvoid using the unit For safety, do notTo prolong service life During useDimensions Including viewfinder Viewfinder off Light GR-AXM20 only Signal system NTSC-typeWhite balance GR-AXM10 Adjustment Auto/Manual adjustment Output Vp-p, 75 ohms Unbalanced via Video Out connectorAlimentacion AlimentaciónColocacion DE LA Bateria Extraccion DE LA BateriaPLAY/PAUSE reproducción/pausa3 REW rebobinado Colóquelo en PlayColóquelo en Camera Botón para inicio/parada de grabación EN FO R Servicing O nly i n U.S.A HOW to Locate Your JVC Service CenterLimited Warranty Warranty Only in U.S.A. ENPage Page GR-AXM10

GR-AXM10, GR-AXM20 specifications

The JVC GR-AXM20 and GR-AXM10 are compact camcorders that made waves in the late 1990s and early 2000s thanks to their innovative features and user-friendly design. Targeting both amateur and semi-professional videographers, these models are known for their reliability and versatility. The JVC GR-AXM20, the more advanced of the two, boasts several high-tech features that appeal to a range of users, from families capturing moments to video enthusiasts.

One of the standout characteristics of the GR-AXM20 is its 20x optical zoom lens, which allows users to capture distant subjects with clarity. This feature is complemented by a digital zoom capability, extending up to 700x, enabling even greater reach when necessary. The GR-AXM10, while slightly less powerful with a 10x optical zoom, still delivers impressive performance for everyday video recording needs.

Both models incorporate JVC's Super Sensing technology, which enhances low-light performance, making them well-suited for indoor or dimly lit environments. The built-in image stabilizer is another hallmark feature, reducing shakiness and delivering smoother video playback, particularly beneficial for handheld shooting.

In terms of audio quality, the GR-AXM20 and GR-AXM10 feature built-in stereo microphones, ensuring clear sound capture to complement the visual element. This combination of video and audio quality positioned these camcorders as practical options for family events, travel videos, and more.

The user interface is designed with simplicity in mind, featuring an LCD screen that rotates for easy viewing from various angles. This flexibility facilitates creative shooting angles and adds to the overall user experience. Additionally, both camcorders support a variety of recording modes, including standard and long-play, maximizing recording time and offering users options depending on their needs.

In summary, the JVC GR-AXM20 and GR-AXM10 stand out for their optical zoom capabilities, low-light performance, and user-friendly design. Their combination of features makes these camcorders ideal choices for those looking to capture life's moments without compromising on quality. Whether for home videos or more artistic endeavors, both models have left a lasting impression in the realm of consumer camcorders.