JVC GR-AXM18EG instruction manual Manual White Balance Adjustment M.W.B

LCD monitor or viewfinder

		MENU
4MENU END			AUTO
FOCUS
EXPOSURE			AUTO
DATE	TIME		25. 12. 98
TELE	MACRO		OFF
TAPE LENGTH T30
M. W. B.		SPEED	AUTO
ZOOM			FAST
4NEXT
	Menu Screen
						M. W. B.
				AUTO
					: FINE
					: CLOUD
					: HALOGEN
				MWB
				EXIT
				M.W.B. Menu Screen

Select Dial

MENU Jog Dial

NOTES:

●To switch to automatic white balance adjustment, set the M.W.B. in the Menu Screen to “AUTO”, or turn the Select Dial to “AUTO LOCK”.

●Re-adjust the White Balance when the lighting has changed, when the camcorder has been turned off and on again, or when the Select Dial’s position has been changed.

●When adjusted by putting coloured paper in front of the subject in step 1 of “MWB”, this unit makes its colour temperature standard for automatic white balance. So you can enjoy shooting with different colours. For example, when adjusting with red, blue or yellow colours, the image becomes the colour which approximates to green, orange or purple respectively.

EN31

Manual White Balance Adjustment (M.W.B.)

The white balance is usually adjusted automatically. However, the more advanced camcorder operator would prefer to control this function manually and achieve a more professional colour/tint reproduction.

ACCESS MENU SCREEN

1 Turn the Select Dial to any position except AUTO LOCK, then press the MENU Jog Dial. The Menu Screen appears.

ACCESS WHITE BALANCE MENU SCREEN

2 Rotate the MENU Jog Dial to move the highlight bar to “M.W.B.”, then press it.

SELECT WHITE BALANCE

3 Rotate the MENU Jog Dial to move the highlight bar to the required white balance.

“AUTO”		Automatic adjustment
“	: FINE”	Outdoors on sunny day
“	: CLOUD”	Outdoors on cloudy day
“	: HALOGEN” ...	Light source is halogen or
		tungsten lamp
“MWB”		When using a personal White
		Balance Setting stored in
		memory (see below.)

CLOSE MENU

4 Press the MENU Jog Dial. The Menu Screen reappears. Then press the MENU Jog Dial again to exit the Menu Screen.

MWB

MWB sets the colour temperature for the subject’s light source so you can shoot with natural colours that are unaffected by surroundings, even when there are multiple subjects with different colour temperatures.

PREPARE WHITE OBJECT

1 Point the camcorder at a white, flat object such as a sheet of white paper.

SELECT MWB

2 Follow step 1 through 3 of the above, select “MWB”.

MEMORIZE WHITE BALANCE

3 Press the MENU Jog Dial until “MWB” begins blinking. “MWB” blinks while the white balance is being stored in memory, then the Menu Screen reappears when memorization is complete.

CLOSE MENU

4 Press the MENU Jog Dial.