JVC GR-AX911U manual START/STOP Viss, Retake Auto Pause

18

RECORDING BasicFeatures(cont.)

START/STOP

VISS

RM-V700U (optional)

RETAKE

AUTO PAUSE

Record-Standby Up

Normal Upside down

RecordRecord-Standby

FEATURE:	Index Code Marking
PURPOSE:	To give you automatic access to any
	selected point on a recording. Auto
	Marking and Manual Marking are
	available.
OPERATION:	Auto Marking
	An index code is marked to start the
	first recording after a cassette is
	inserted, as long as the Power switch
	is set to “CAMERA”.
	Manual Marking
	1) Press VISS once to place the index
	code. INDEX blinks in the
	viewfinder during marking.
NOTE:	● If VISS is pressed during
	Record–Standby mode, the mark is
	placed where RECORDING
	START/STOP is pressed.
FEATURE:	Retake
PURPOSE:	To re-record certain segments.
OPERATION:	1) Make sure the camcorder is in the
	Record–Standby mode.
	2) Press either RETAKE button to
	reach the start point for new
	recording.
	3) Press RECORDING START/STOP
	to start recording.
NOTE:	● Noise may appear during Retake.
	This is normal.
FEATURE:	Auto Pause System
PURPOSE:	To automatically stop recording
	when the camcorder is pointed
	down, preventing accidental
	recordings of the ground, your feet,
	etc.
OPERATION:	1) Set AUTO PAUSE to “ON”. When
	the camcorder is tilted down by a
	large degree from its horizontal
	position during recording, the
	Record-Standby mode is
	automatically engaged. “AUTO
	PAUSE” appears in the viewfinder.
NOTE:	● The Auto Pause System is also
	effective when the camcorder is
	pointed up, or is positioned upside
	down.
	● Auto Pause also works when the
	camcorder is twisted by a large
	degree to the left or right.
	● When you want to shoot in any of
	the aforementioned positions,
	make sure you set AUTO PAUSE to
	“OFF”.

Record-Standby Down