JVC GR-AX911U manual SET Video Light, Light ON/AUTO/OFF

19

Video Light

When natural lighting is too dim, you can brighten the scene by using the built-in video light.

SET VIDEO LIGHT
Set the LIGHT ON/AUTO/OFF as required.
1 ON	: Always keeps the light on as long as the
	camcorder is turned on.
AUTO : Automatically turns on the light when the
LIGHT ON/AUTO/OFF	camcorder senses insufficient lighting on
	the subject.

OFF : Turns off the light.

•The video light can be used with the camcorder’s power on.

•It is recommended to set the white balance

(☞ pg. 23) to indoor mode () when you use the video light.

•When not using the video light, turn it off to save battery power.

NOTES:

●Even if the battery indicator ( ) does not blink in the viewfinder, if the battery pack’s charge is low, the camcorder may turn off automatically when you turn on the video light, or when you start recording with the video light turned on.

●When the LIGHT ON/AUTO/OFF switch is set to “AUTO”:

•Depending on the lighting conditions, the video light may keep turning on and off. In this case, manually switch the light on or off using the LIGHT ON/ AUTO/OFF switch.

•While the Sports or High-Speed Shutter mode

(☞ pg. 27) is engaged, the light is likely to stay on.

•While the Twilight mode (☞ pg. 27) is engaged, the light will not activate.

DANGER

•The video light become extremely hot. Do not touch it either while in operation or soon after turning it off, otherwise serious injury may result.

•Do not place the camcorder into the carrying case immediately after using the video light, since it remains extremely hot.

•When operating, keep a distance of about 30 cm. (1 ft.) between the video light and people or objects.

•Do not use near flammable or explosive materials. •It is recommended that you consult your nearest

JVC dealer for replacing the video light.