JVC GR-AXM99UM manual LCD monitor or viewfinder Fine 12Remaining Number Shots, Full

LCD monitor or viewfinder

FINE 12Remaining Number

of Shots

22 21 1 0 (Blinking)

Pictrue Mode Display:

FINE or STD (standard)

Pin-Up

A still image on a white background. A shadow effect is added to give it a three dimensional feel.

Full

A still image that

occupies the entire

image field is recorded.

EN27

NOTES:

●Six sample images have been stored in the built-in memory at the factory.

If you wish to delete them, first remove the “Protect” function (☞ pg. 59), then perform the “Delete” function (☞ pg. 60).

●When the remaining number indicator displays “0” (blinking), the still image will be recorded onto the tape but not in the built-in memory. If you wish to store a still image in the built-in memory, perform the

“DELETE” function in the Menu Screen to remove still images you do not need (☞ pg. 60).

●The Picture Mode can be switched to either “FINE” or “STANDARD”. Since the remaining number of shots available depends on the selected Picture Mode, switching the Picture Mode will vary this number.

●If the SNAPSHOT Button is pressed with the System Select Switch set to “D.S.C.”, the still image cannot be

recorded onto the tape, but will be stored in the camcorder's built-in memory (☞ pg. 48).

●Image data stored in the camcorder’s built-in memory can be transferred to a Windows® PC or Macintosh®

and saved using the provided image transfer software (☞ pg. 63). The image data transferred to a personal computer can also be further processed using Paint Software.

●When a Pin-Up is taken with the Wide mode (☞ pg. 31) activated, the black bars at the top and bottom of the screen will disappear.

●When a Snapshot is taken in a dark environment, the still image recorded onto the tape and stored in memory will become coarse and its true colors will be lost.