JVC GR-AXM99UM manual SET Protect, Set the System Select Menu Jog Dial, Switch to D.S.C

EN59

		Protect
		This mode helps prevent accidental erasure of images.
		Put a padlock mark next to the desired still image, and
		that still image cannot be deleted.
		ACCESS MENU SCREEN
		1 Press the MENU Jog Dial.
Set the System Select	MENU Jog Dial	ACCESS PROTECT MENU SCREEN
Switch to “D.S.C.”.		Rotate the MENU Jog Dial to move the highlight bar
		2 to “PROTECT”, then press it.
LCD monitor or viewfinder		•If you do not want to perform “Protect” for any still
MENU		image, go to step 4.
		SET PROTECT
SLIDE SHOW 1
INDEX
SLIDE SHOW 2		Rotate the MENU Jog Dial to move the frame to the
PROTECT		3 desired still image, then press it. The padlock mark
DELETE
		appears above the selected image.

￿			•On the Protect Menu Screen, all still images are
4MENU END
	Menu Screen		displayed six at a time. To perform “Protect” for
			the still images that come after the 6th one, rotate
			the MENU Jog Dial to move the frame from Index
E X I T	< PROTECT >		No. 1 to No. 6, then rotate it further downward.
			The frame is placed automatically on the 7th still
01		03
			image. Images after the 7th one can also be
			accessed in the same way.
04	05	06	•To complete “Protect”, go to step 4.
			CLOSE MENU
			Rotate the MENU Jog Dial upward to place the
Protect Menu Screen			4 highlight bar on “EXIT”, then press it twice.
E X I T	< PROTECT >		To remove “Protect”. . .
01		03	Perform steps 1 and 2, rotate the MENU Jog Dial to move
			the frame to the desired still image with the padlock
			mark, then press it. The padlock mark located above the
04	05	06	still image disappears and the image is no longer
			protected. When finished removing protection, perform
			step 4.

A padlock mark appears. NOTES:

●To move the frame from Index No. 7 to 6, place the highlight bar on “EXIT” by rotating the MENU Jog Dial upward. Rotate the MENU Jog Dial further upward. The frame is moved to the 6th still image automatically. Perform the same procedure for still images that follow the 13th one.

●On the Protect Menu Screen, a star mark is displayed next to a still image you shot in the FINE mode.