JVC GR-AX97 manual Using Remote Control Unit, Random Assemble Editing R.A.Edit, Operate VCR

44EN

USINGREMOTECONTROLUNIT(cont.)

Random Assemble Editing [R.A.Edit]

	MBR SET
1 2 3	VCR CTL

4 5 6

7 8 9 0 RM-V700U (optional)

Create edited videos easily using your camcorder as the source player. You can select up to 8 “cuts” for automatic editing, in any order you like. R.A.Edit is more easily performed when the optional RM-V700U MBR (Multi- Brand Remote, ☞ pg. 42) is set to operate with your brand of VCR (see VCR CODE LIST), but can also be performed by operating the VCR manually.

Before operation, make sure the lithium battery is installed in the remote control RM-V700U (☞ pg. 42).

VCR CODE LIST

VCR BRAND	BUTTONS
NAME	(A) (B)
GE	1 1￿
	9 2￿
	9 `￿
	9 4
HITACHI	6 6￿
	6 3
JVC A	9 1￿
B	9 6￿
C	9 3
MAGNAVOX	9 5￿
	1 1￿
	7 1￿
	7 6
MITSUBISHI	6 7￿
	6 8
NEC	3 7￿
	3 8
PHILIPS	1 9￿
	9 5￿
	1 1￿
	9 4￿
	9 1￿
	9 6

VCR BRAND	BUTTONS
NAME		(A) (B)
PHILIPS		1 2￿
		3 3
PANASONIC		1 3￿
		1 7￿
		1 1￿
		9 4￿
		1 8￿
RCA	￿	9 2￿
		9 4￿
		6 6￿
		6 3￿
		9 `
SANYO		3 6￿
		3 5
SHARP		1 5￿
		1 `
SONY		6 5￿
		6 `￿
		3 9￿
		3 1￿
TOSHIBA	￿	6 9￿
		6 1
ZENITH		1 6

SET REMOTE/VCR CODE

SET REMOTE TO OPERATE VCR

1 Turn off the power to the VCR and point the remote toward the VCR’s infrared sensor. Then, referring to the VCR CODE LIST on the left, press and hold MBR SET, and press button (A) and then (B).

•The code is automatically set once you release the MBR SET button, and the VCR’s power comes on.

OPERATE VCR

2 Make sure the VCR’s power is on. Then, while holding VCR CTL, press the button on the remote for the desired function. The functions the remote can control are PLAY, STOP, PAUSE, FF, REW and VCR REC STBY (you don’t need to press VCR CTL for this one).

You’re now ready to try Random Assemble Editing.

IMPORTANT

Although the MBR is compatible with JVC VCRs and those of many other makers, it may not work with yours or may offer limited functions.

NOTES:

●If the VCR’s power doesn’t come on in step 1, try another code from the VCR CODE LIST.

●Some brands of VCR don’t come on automatically. In this case, turn the power on manually and try step 2.

●If the RM-V700U is not able to control the VCR, use the controls on the VCR.