JVC GR-D320EK manual Quick Review, Recording From The Middle Of a Tape

Page 20

20 EN VIDEO RECORDING

NOTES:

●The time code cannot be reset.

●During fast-forwarding and rewinding, the time code indication does not move smoothly.

●The time code is displayed only when “TIME CODE” is set to “ON”. ( pg. 25)

Quick Review

Enables to check the end of the last recording.

1)Press QUICK REVIEW during the Recording-Standby mode.

2)Tape is rewound for about several seconds and played back automatically, then pauses in the Recording-Standby mode for the next shot.

● Distortion may occur at start of playback. This is normal.

Recording From The Middle Of A Tape

1)Play back a tape or use Blank Search

( pg. 21) to find the spot at which you want to start recording, then engage the Still Playback mode. ( pg. 21)

2)Set the Power Switch to “REC” while pressing down the Lock Button located on the switch, then start recording.

Image 20

Contents GR-D320E/EK Dear CustomerWe recommend cleaning your video heads before use Use SP Standard mode for important video recordingsFor safety and reliability Do not leave the unitImportant for owners in the U.K Blue to N Neutral or Black Brown to L Live or RedInformation for Users on Disposal of Old Equipment European UnionSome DO’S and DON’TS on the Safe USE of Equipment Data Battery Wipe/Fader EffectsAuto Button Backlight CompensationPower-Linked Operation Playback SnapshotIndex Connectors IndicatorsPOWER/CHARGE Lamp pg Controls2006 LCD Monitor/Viewfinder IndicationsDuring Video Playback Before Using This Camcorder Power How To Attach The Lens CapCharging The Battery Pack How To Attach The Shoulder StrapData Battery System Maximum continuous recording timeOperation Mode Using AC PowerAuto/Manual Mode About BatteriesGrip Adjustment Date/Time SettingsLanguage Settings SET orTripod Mounting Viewfinder AdjustmentDisplay To protect valuable recordings Basic Recording Tape Remaining TimeLCD Monitor And Viewfinder Approximate recording timeZooming Journalistic Shooting Time CodeZoom Zoom OutQuick Review Recording From The Middle Of a TapeNormal Playback Still PlaybackShuttle Search Blank SearchIf using a VCR, go to . If not, go to step To AV connector Audio/Video cable providedFunction pg Setting pg System pg Display pg Video Recording MenusVideo Playback Menus For Video Recording MenusRecording Menus Power Switch is set to REC are also applied When the Power switch is set to PlayAppear on screen when the camcorder is Execute Resets all settings to the factory PresetSound Mode and Narration When set to OFF, the camcorder’s display disappearsPlayback Menus OFF / onWide Mode Motor Drive ModeNight-Scope Snapshot Record Still Image On TapeTo reset to Auto Focus Manual FocusManual focus is recommended in situations listed below To return to automatic exposure controlTo cancel Backlight Compensation Iris LockBacklight Compensation To lock the irisWhite Balance Adjustment To change the settingAuto White balance is adjusted automatically Set W.BALANCE in Function Menu pgSelect OFF in . The effect indicator disappears Wipe Or Fader EffectsProgram AE, Effects and Shutter Effects To deactivate the selected effectOFF Disables the function. Factory-preset SportsDubbing To a VCR Dubbing To DV OUTTo a PC with a DV connector by using If you are using a Windows XP, you can useConferences over the Internet, using a Available softwarePower Advanced featuresVideo Recording Video PlaybackOther problems Troubleshooting ENDisplays the battery remaining power Appears when the tape ends during recording or playbackRemaining power level High ExhaustedCleaning The Camcorder To clean the exteriorTo clean the LCD monitor To clean the lensCassettes LCD MonitorMain Unit Camcorder AC AdapterRecording Capacity TermsGR-D320E/EK