JVC GR-D320EK manual Recording Menus

Page 24

24 EN MENUS FOR DETAILED ADJUSTMENT

Recording Menus

FUNCTION

The menu settings can be changed only when the Power Switch is set to “REC”.

[ ] = Factory-preset

WIPE/FADER

( pg. 31), “Wipe or Fader Effects”

EFFECT

( pg. 31), “Program AE, Effects and Shutter

Effects”

PROGRAM AE

( pg. 32), “Program AE, Effects and Shutter

Effects”

SHUTTER

( pg. 32), “Program AE, Effects and Shutter

Effects”

EXPOSURE

( pg. 28), “Exposure Control”

W. BALANCE

( pg. 30), “White Balance Adjustment”

TELE MACRO

[OFF]: Disables the function.

ON: When the distance to the subject is less than 1 m (3.3 ft), set “TELE MACRO” to “ON”. You can shoot a subject as large as possible at a distance of approx. 40 cm. Depending on the zoom position, the lens may go out of focus.

SETTING

The menu settings can be changed only when the Power Switch is set to “REC”.

[ ] = Factory-preset

REC MODE

[SP*]: To record in the SP (Standard Play) mode

LP: Long Play—more economical, providing 1.5 times the recording time.

*SP indicator does not appear on the screen.

NOTES:

If the recording mode is switched, the playback picture will be blurred at the switching point.

It is recommended that tapes recorded in the LP mode on this camcorder be played back on this camcorder.

During playback of a tape recorded on another camcorder, blocks of noise may appear or there may be momentary pauses in the sound.

SOUND MODE

[12BIT]: Enables video recording of stereo sound on four separate channels, (Equivalent to the 32 kHz mode of previous models)

16BIT: Enables video recording of stereo sound on two separate channels. (Equivalent to the 48 kHz mode of previous models)

DIS

OFF: Disables the function.

[ON ]: To compensate for unstable images caused by camera-shake, particularly at high magnification.

NOTES:

Accurate stabilisation may not be possible if hand shake is excessive, or depending on the shooting condition.

The “ ” indicator blinks or goes out if the Stabiliser cannot be used.

Switch off this mode when recording with the camcorder on a tripod.

ZOOM

[25X]: When set to “25X” while using Digital Zoom, the zoom magnification will reset to 25X since Digital Zoom will be disengaged.

50X: Allows you to use the Digital Zoom. By digitally processing and magnifying images, zooming is possible from 25X (the optical zoom limit), to a maximum of 50X digital magnification. 800X: Allows you to use the Digital Zoom. By digitally processing and magnifying images, zooming is possible from 25X (the optical zoom limit), to a maximum of 800X digital magnification.

GAIN UP

OFF: Allows you to shoot dark scenes with no picture brightness adjustment.

[AGC]: The overall appearance may be grainy, but the image is bright.

AUTO : The shutter speed is automatically adjusted. Shooting a subject in low or poor lighting at slow shutter speed provides a brighter image than in the AGC mode, but the subject’s movements are not smooth or natural. The overall appearance may be grainy. While the

Image 24
Contents GR-D320E/EK Dear CustomerWe recommend cleaning your video heads before use Use SP Standard mode for important video recordingsFor safety and reliability Do not leave the unitImportant for owners in the U.K Blue to N Neutral or Black Brown to L Live or RedInformation for Users on Disposal of Old Equipment European UnionSome DO’S and DON’TS on the Safe USE of Equipment Data Battery Wipe/Fader EffectsAuto Button Backlight CompensationPower-Linked Operation Playback SnapshotIndex Connectors IndicatorsPOWER/CHARGE Lamp  pg ControlsLCD Monitor/Viewfinder Indications During Video Playback2006 Before Using This Camcorder Power How To Attach The Lens CapCharging The Battery Pack How To Attach The Shoulder StrapData Battery System Maximum continuous recording timeOperation Mode Using AC PowerAuto/Manual Mode About BatteriesGrip Adjustment Date/Time SettingsLanguage Settings SET orViewfinder Adjustment DisplayTripod Mounting To protect valuable recordings Basic Recording Tape Remaining TimeLCD Monitor And Viewfinder Approximate recording timeZooming Journalistic Shooting Time CodeZoom Zoom OutQuick Review Recording From The Middle Of a TapeNormal Playback Still PlaybackShuttle Search Blank SearchIf using a VCR, go to . If not, go to step To AV connector Audio/Video cable providedFunction  pg Setting  pg System  pg Display  pg Video Recording MenusVideo Playback Menus For Video Recording MenusRecording Menus Power Switch is set to REC are also applied When the Power switch is set to PlayAppear on screen when the camcorder is Execute Resets all settings to the factory PresetSound Mode and Narration When set to OFF, the camcorder’s display disappearsPlayback Menus OFF / onWide Mode Motor Drive ModeNight-Scope Snapshot Record Still Image On TapeTo reset to Auto Focus Manual FocusManual focus is recommended in situations listed below To return to automatic exposure controlTo cancel Backlight Compensation Iris LockBacklight Compensation To lock the irisWhite Balance Adjustment To change the settingAuto White balance is adjusted automatically Set W.BALANCE in Function Menu  pgSelect OFF in . The effect indicator disappears Wipe Or Fader EffectsProgram AE, Effects and Shutter Effects To deactivate the selected effectOFF Disables the function. Factory-preset SportsDubbing To a VCR Dubbing To DV OUTTo a PC with a DV connector by using If you are using a Windows XP, you can useConferences over the Internet, using a Available softwarePower Advanced featuresVideo Recording Video PlaybackOther problems Troubleshooting ENDisplays the battery remaining power Appears when the tape ends during recording or playbackRemaining power level High ExhaustedCleaning The Camcorder To clean the exteriorTo clean the LCD monitor To clean the lensCassettes LCD MonitorMain Unit Camcorder AC AdapterRecording Capacity TermsGR-D320E/EK